* Use Credential from BSL for restic commands
This change introduces support for restic to make use of per-BSL
credentials. It makes use of the `credentials.FileStore` introduced in
PR #3442 to write the BSL credentials to disk. To support per-BSL
credentials for restic, the environment for the restic commands needs to
be modified for each provider to ensure that the credentials are
provided via the correct provider specific environment variables.
This change introduces a new function `restic.CmdEnv` to check the BSL
provider and create the correct mapping of environment variables for
each provider.
Previously, AWS and GCP could rely on the environment variables in the
Velero deployments to obtain the credentials file, but now these
environment variables need to be set with the path to the serialized
credentials file if a credential is set on the BSL.
For Azure, the credentials file in the environment was loaded and parsed
to set the environment variables for restic. Now, we check if the BSL
has a credential, and if it does, load and parse that file instead.
This change also introduces a few other small improvements. Now that we
are fetching the BSL to check for the `Credential` field, we can use the
BSL directly to get the `CACert` which means that we can remove the
`GetCACert` function. Also, now that we have a way to serialize secrets
to disk, we can use the `credentials.FileStore` to get a temp file for
the restic repo password and remove the `restic.TempCredentialsFile`
function.
Signed-off-by: Bridget McErlean <bmcerlean@vmware.com>
* Add documentation for per-BSL credentials
Signed-off-by: Bridget McErlean <bmcerlean@vmware.com>
* Address review feedback
Signed-off-by: Bridget McErlean <bmcerlean@vmware.com>
* Address review comments
Signed-off-by: Bridget McErlean <bmcerlean@vmware.com>
* Load credentials and pass to ObjectStorage plugins
Update NewObjectBackupStore to take a CredentialsGetter which can be
used to get the credentials for a BackupStorageLocation if it has been
configured with a Credential. If the BSL has a credential, use that
SecretKeySelector to fetch the secret, write the contents to a temp file
and then pass that file through to the plugin via the config map using
the key `credentialsFile`. This relies on the plugin being able to use
this new config field.
This does not yet handle VolumeSnapshotLocations or ResticRepositories.
Signed-off-by: Bridget McErlean <bmcerlean@vmware.com>
* Address code reviews
Add godocs and comments.
Improve formatting and test names.
Signed-off-by: Bridget McErlean <bmcerlean@vmware.com>
* Address code reviews
Signed-off-by: Bridget McErlean <bmcerlean@vmware.com>
* Use kubebuilder client for fetching restic secrets
Instead of using a SecretInformer for fetching secrets for restic, use
the cached client provided by the controller-runtime manager.
In order to use this client, the scheme for Secrets must be added to the
scheme used by the manager so this is added when creating the manager in
both the velero and restic servers.
This change also refactors some of the tests to add a shared utility for
creating a fake controller-runtime client which is now used among all
tests which use that client. This has been added to ensure that all
tests use the same client with the same scheme.
Signed-off-by: Bridget McErlean <bmcerlean@vmware.com>
* Add builder for SecretKeySelector
Signed-off-by: Bridget McErlean <bmcerlean@vmware.com>
* Adding handling of restic-wait init container at any order with warning.
Signed-off-by: Piper Dougherty <doughertypiper@gmail.com>
* Adding newline at end of files to match convention.
Signed-off-by: Piper Dougherty <doughertypiper@gmail.com>
* Formatting.
Signed-off-by: Piper Dougherty <doughertypiper@gmail.com>
* Update copyright year on modified files.
Signed-off-by: Piper Dougherty <doughertypiper@gmail.com>
* k8s 1.18 import wip
backup, cmd, controller, generated, restic, restore, serverstatusrequest, test and util
Signed-off-by: Andrew Lavery <laverya@umich.edu>
* go mod tidy
Signed-off-by: Andrew Lavery <laverya@umich.edu>
* add changelog file
Signed-off-by: Andrew Lavery <laverya@umich.edu>
* go fmt
Signed-off-by: Andrew Lavery <laverya@umich.edu>
* update code-generator and controller-gen in CI
Signed-off-by: Andrew Lavery <laverya@umich.edu>
* checkout proper code-generator version, regen
Signed-off-by: Andrew Lavery <laverya@umich.edu>
* fix remaining calls
Signed-off-by: Andrew Lavery <laverya@umich.edu>
* regenerate CRDs with ./hack/update-generated-crd-code.sh
Signed-off-by: Andrew Lavery <laverya@umich.edu>
* use existing context in restic and server
Signed-off-by: Andrew Lavery <laverya@umich.edu>
* fix test cases by resetting resource version
also use main library go context, not golang.org/x/net/context, in pkg/restore/restore.go
Signed-off-by: Andrew Lavery <laverya@umich.edu>
* clarify changelog message
Signed-off-by: Andrew Lavery <laverya@umich.edu>
* use github.com/kubernetes-csi/external-snapshotter/v2@v2.2.0-rc1
Signed-off-by: Andrew Lavery <laverya@umich.edu>
* run 'go mod tidy' to remove old external-snapshotter version
Signed-off-by: Andrew Lavery <laverya@umich.edu>
* kubebuilder init - minimalist version
Signed-off-by: Carlisia <carlisia@vmware.com>
* Add back main.go, apparently kb needs it
Signed-off-by: Carlisia <carlisia@vmware.com>
* Tweak makefile to accomodate kubebuilder expectations
Signed-off-by: Carlisia <carlisia@vmware.com>
* Port BSL to kubebuilder api client
Signed-off-by: Carlisia <carlisia@vmware.com>
* s/cache/client bc client fetches from cache
And other naming improvements
Signed-off-by: Carlisia <carlisia@vmware.com>
* So, .GetAPIReader is how we bypass the cache
In this case, the cache hasn't started yet
Signed-off-by: Carlisia <carlisia@vmware.com>
* Oh that's what this code was for... adding back
We still need to embed the CRDs as binary data in the Velero binary to
access the generated CRDs at runtime.
Signed-off-by: Carlisia <carlisia@vmware.com>
* Tie in CRD/code generation w/ existing scripts
Signed-off-by: Carlisia <carlisia@vmware.com>
* Mostly result of running update-fmt, updated file formatting
Signed-off-by: Carlisia <carlisia@vmware.com>
* Just a copyright fix
Signed-off-by: Carlisia <carlisia@vmware.com>
* All the test fixes
Signed-off-by: Carlisia <carlisia@vmware.com>
* Add changelog + some cleanup
Signed-off-by: Carlisia <carlisia@vmware.com>
* Update backup manifest
Signed-off-by: Carlisia <carlisia@vmware.com>
* Remove unneeded auto-generated files
Signed-off-by: Carlisia <carlisia@vmware.com>
* Keep everything in the same (existing) package
Signed-off-by: Carlisia <carlisia@vmware.com>
* Fix/clean scripts, generated code, and calls
Deleting the entire `generated` directory and running `make update`
works. Modifying an api and running `make verify` works as expected.
Signed-off-by: Carlisia <carlisia@vmware.com>
* Clean up schema and client calls + code reviews
Signed-off-by: Carlisia <carlisia@vmware.com>
* Move all code gen to inside builder container
Signed-off-by: Carlisia <carlisia@vmware.com>
* Address code review
Signed-off-by: Carlisia <carlisia@vmware.com>
* Fix imports/aliases
Signed-off-by: Carlisia <carlisia@vmware.com>
* More code reviews
Signed-off-by: Carlisia <carlisia@vmware.com>
* Add waitforcachesync
Signed-off-by: Carlisia <carlisia@vmware.com>
* Have manager register ALL controllers
This will allow for proper cache management.
Signed-off-by: Carlisia <carlisia@vmware.com>
* Status subresource is now enabled; cleanup
Signed-off-by: Carlisia <carlisia@vmware.com>
* More code reviews
Signed-off-by: Carlisia <carlisia@vmware.com>
* Clean up
Signed-off-by: Carlisia <carlisia@vmware.com>
* Manager registers ALL controllers for restic too
Signed-off-by: Carlisia <carlisia@vmware.com>
* More code reviews
Signed-off-by: Carlisia <carlisia@vmware.com>
* Add deprecation warning/todo
Signed-off-by: Carlisia <carlisia@vmware.com>
* Add documentation
Signed-off-by: Carlisia <carlisia@vmware.com>
* Add helpful comments
Signed-off-by: Carlisia <carlisia@vmware.com>
* Address code review
Signed-off-by: Carlisia <carlisia@vmware.com>
* More idiomatic Runnable
Signed-off-by: Carlisia <carlisia@vmware.com>
* Clean up imports
Signed-off-by: Carlisia <carlisia@vmware.com>
* Support setting a custom CA certificate for a BSL
Signed-off-by: Sam Lucidi <slucidi@redhat.com>
* update CRDS
Signed-off-by: Sam Lucidi <slucidi@redhat.com>
* Add changelog for #2353
Signed-off-by: Sam Lucidi <slucidi@redhat.com>
* Clean up temp file from TestTempCACertFile
Signed-off-by: Sam Lucidi <slucidi@redhat.com>
* update import paths to github.com/vmware-tanzu/...
Signed-off-by: Steve Kriss <krisss@vmware.com>
* update other GH org refs to vmware-tanzu
Signed-off-by: Steve Kriss <krisss@vmware.com>
* site and docs: update GH org to vmware-tanzu
Signed-off-by: Steve Kriss <krisss@vmware.com>
* update travis badge links on docs readmes
Signed-off-by: Steve Kriss <krisss@vmware.com>
CSI volumes are mounted one level deeper than "native" kubernetes
volumes, and this needs to be appended for proper restic support.
Fixes#1313.
Signed-off-by: Nolan Brubaker <brubakern@vmware.com>
* record PodVolumeBackup start and completion timestamps
adds startTimestamp and completionTimestamp fields to the
PodVolumeBackup status spec
Signed-off-by: Adnan Abdulhussein <aadnan@vmware.com>
* record PodVolumeRestore start and completion timestamps
Signed-off-by: Adnan Abdulhussein <aadnan@vmware.com>
Wenkai Yin(尹文开)
Bridget McErlean
Taeuk Kim
Piper Dougherty
Carlisia Thompson
Andrew Lavery
Samuel Lucidi
Dinesh Yadav
Adnan Abdulhussein
Steve Kriss
Nolan Brubaker
Steve Kriss
Andy Goldstein
Steve Kriss