AqualinkD/source/aqualink.h

#ifndef AQUALINK_H_
#define AQUALINK_H_

#include <pthread.h>
#include <stdbool.h>
#include <stdint.h>
#include "aq_serial.h"
#include "aq_programmer.h"
//#include "aq_panel.h"  // Moved to later in file to overcome circular dependancy. (crappy I know)


#define SIGRESTART SIGUSR1 

#ifdef AQ_NO_THREAD_NETSERVICE
  #define DEFAULT_POLL_SPEED -1
  #define DEFAULT_POLL_SPEED_NON_THREADDED 2
#endif


#define CLIGHT_PANEL_FIX // Overcome bug in some jandy panels where color light status of on is not in LED status

#define TIME_CHECK_INTERVAL  3600
//#define TIME_CHECK_INTERVAL  100 // DEBUG ONLY
#define ACCEPTABLE_TIME_DIFF 120

// Use these settings to test time
//#define TIME_CHECK_INTERVAL  100
//#define ACCEPTABLE_TIME_DIFF 10

#define MAX_ZERO_READ_BEFORE_RECONNECT_NONBLOCKING 100000 // 10k normally
#define MAX_ZERO_READ_BEFORE_RECONNECT_BLOCKING (25 / (SERIAL_BLOCKING_TIME / 10) ) // Want this to be 25 seconds, so it's depdand on how long the serial blocking is
// Time in ms to delay between read requests in non blocking serial port.  Have to set something to stop CPU spiking.
#define NONBLOCKING_SERIAL_DELAY 2

// The below will change state of devices before that are actually set on the control panel, this helps
// with duplicate messages that come in quick succession that can catch the state before it happens.
//#define PRESTATE_ONOFF
#define PRESTATE_SWG_SETPOINT
//#define PRESTATE_HEATER_SETPOINT // This one is not implimented yet

void intHandler(int dummy);

#ifdef AQ_PDA
bool checkAqualinkTime(); // Only need to externalise this for PDA
#endif

// There are cases where SWG will read 80% in allbutton and 0% in onetouch/aqualinktouch, this will compile that in or out
//#define READ_SWG_FROM_EXTENDED_ID

//#define TOTAL_BUTTONS     12
/*
#ifndef AQ_RS16
#define TOTAL_BUTTONS          12
#else
#define TOTAL_BUTTONS          20
#define RS16_VBUTTONS_START    13  // RS16 panel has 4 buttons with no LED's, so list them for manual matching to RS messages
#define RS16_VBUTTONS_END      16  // RS16 panel has 4 buttons with no LED's, so list them for manual matching to RS messages
#endif
*/
#define TEMP_UNKNOWN    -999
#define TEMP_REFRESH    -998
//#define UNKNOWN TEMP_UNKNOWN
#define DATE_STRING_LEN   30

#define MAX_PUMPS 4
#define MAX_LIGHTS 4

bool isVirtualButtonEnabled();

#define PUMP_RPM_MAX 3450
#define PUMP_RPM_MIN 600
#define PUMP_GPM_MAX 130
#define PUMP_GPM_MIN 15


enum {
 FAHRENHEIT,
 CELSIUS,
 UNKNOWN
};

typedef struct aqualinkkey
{
  //int number;
  //aqledstate *state;
  aqled *led;
  char *label;
  char *name;
//#ifdef AQ_PDA
//  char *pda_label;
//#endif
  unsigned char code;
  unsigned char rssd_code;
  int dz_idx;
  uint8_t special_mask;
  void *special_mask_ptr;
} aqkey;

// special_mask for above aqualinkkey structure.
#define VS_PUMP        (1 << 0)
#define PROGRAM_LIGHT  (1 << 1)
#define TIMER_ACTIVE   (1 << 2) 
//#define DIMMER_LIGHT   (1 << 3) // NOT USED (Use PROGRAM_LIGHT or type LC_DIMMER) 
#define VIRTUAL_BUTTON (1 << 4)
//typedef struct ProgramThread ProgramThread;  // Definition is later

struct programmingthread {
  pthread_t *thread_id;
  pthread_mutex_t thread_mutex;
  pthread_cond_t thread_cond;
  program_type ptype;
  //void *thread_args;
};



typedef enum action_type {
  NO_ACTION = -1,
  POOL_HTR_SETOINT,
  SPA_HTR_SETOINT,
  FREEZE_SETPOINT,
  SWG_SETPOINT,
  SWG_BOOST,
  PUMP_RPM,
  PUMP_VSPROGRAM,
  POOL_HTR_INCREMENT,   // Setpoint add value (can be negative)
  SPA_HTR_INCREMENT,    // Setpoint add value
  ON_OFF,
  TIMER,
  LIGHT_MODE,
  LIGHT_BRIGHTNESS,
  DATE_TIME
} action_type;

struct action {
  action_type type;
  time_t requested;
  int value;
  int id; // Only used for Pumps at the moment.
  //char value[10];
};

// Moved to aq_programmer to stop circular dependancy
/*
typedef enum pump_type {
  PT_UNKNOWN = -1,
  EPUMP,
  VSPUMP,
  VFPUMP
} pump_type;
*/

/*
typedef enum simulator_type {
  SIM_NONE,
  SIM_ALLB,
  SIM_ONET,
  SIM_PDA,
  SIM_IAQT
} simulator_type;
*/

//#define PUMP_PRIMING -1
//#define PUMP_OFFLINE -2
//#define PUMP_ERROR   -3
#define PUMP_OFF_RPM 0
#define PUMP_OFF_GPM PUMP_OFF_RPM
#define PUMP_OFF_WAT PUMP_OFF_RPM


// FUTURE VSP STATUS, keep panel status and RS485 status seperate

typedef enum panel_vsp_status
{
  PS_OK = 0,  // Start at 0 to match actual status from RS, but go down from their.
  PS_OFF = -1,
  PS_PRIMING = -2,
  PS_OFFLINE = -3,
  PS_ERROR = -4
} panel_vsp_status;

#define PUMP_NAME_LENGTH 30

typedef struct pumpd
{
  int rpm;
  int gpm;
  int watts;
  int maxSpeed; // Max rpm or gpm depending on pump
  int minSpeed;
  unsigned char pumpID;
  int pumpIndex;
  char pumpName[PUMP_NAME_LENGTH];
  //char *pumpName;
  pump_type pumpType;
  //int buttonID;
  protocolType prclType;
  aqkey *button;
  //bool updated;
  // Other VSP values read directly from RS485
  int mode;  // 0 local control, 1 remote control
  //int driveState; // Haven't figured out what this is yet
  int status;
  panel_vsp_status pStatus;  // FUTURE VSP STATUS,
  int pressureCurve;
} pump_detail;

// color light modes (Aqualink program, Jandy, Jandy LED, SAm/SAL, Color Logic, Intellibrite)
typedef enum clight_type {
  LC_PROGRAMABLE=0, 
  LC_JANDY, 
  LC_JANDYLED, 
  LC_SAL, 
  LC_CLOGIG, 
  LC_INTELLIB,
  LC_HAYWCL,
  LC_SPARE_1,
  LC_SPARE_2,
  LC_SPARE_3,
  LC_DIMMER,  // use 0, 25, 50, 100
  LC_DIMMER2,  // use range 0 to 100
  NUMBER_LIGHT_COLOR_TYPES // This is used to size and count so add more prior to this
} clight_type;

typedef enum {
  NET_MQTT=0, 
  NET_API, 
  NET_WS, 
  NET_DZMQTT,
  NET_TIMER,       // Timer or Scheduler (eg poweron/freezeprotect check)
  UNACTION_TIMER
} request_source;

typedef struct clightd
{
  clight_type lightType;
  aqkey *button;
  int currentValue;
  int lastValue;         // Used for AqualinkD self programming
  aqledstate RSSDstate;  // state from rs serial adapter
} clight_detail;


#include "aq_panel.h"


struct aqualinkdata
{
  char version[AQ_MSGLEN*2];
  char revision[AQ_MSGLEN];
  char date[AQ_MSGLEN];
  char time[AQ_MSGLEN];
  char last_message[AQ_MSGLONGLEN+1]; // Last ascii message from panel - allbutton (or PDA) protocol
  char last_display_message[AQ_MSGLONGLEN+1]; // Last message to display in web UI
  bool is_display_message_programming;
  aqled aqualinkleds[TOTAL_LEDS];
  aqkey aqbuttons[TOTAL_BUTTONS];
  unsigned short total_buttons;
  unsigned short virtual_button_start;
  int air_temp;
  int pool_temp;
  int spa_temp;
  int temp_units;
  //bool single_device; // Pool or Spa only, not Pool & Spa (Thermostat setpoints are different)
  int battery;
  int frz_protect_set_point;
  int pool_htr_set_point;
  int spa_htr_set_point;
  int swg_percent;
  int swg_ppm;
  unsigned char ar_swg_device_status; // Actual state 
  unsigned char heater_err_status;
  aqledstate swg_led_state; // Display state for UI's
  aqledstate service_mode_state;
  aqledstate frz_protect_state;
  int num_pumps;
  pump_detail pumps[MAX_PUMPS];
  int num_lights;
  clight_detail lights[MAX_LIGHTS];
  bool boost;
  char boost_msg[10];
  int boost_duration; // need to remove boost message and use this
  float ph;
  int orp;

  // Below this line is not state related. (Future just do a mem compare for change)
  //aqkey *orderedbuttons[TOTAL_BUTTONS]; // Future to reduce RS4,6,8,12,16 & spa buttons
  //unsigned short total_ordered_buttons;
  unsigned char last_packet_type;
  int swg_delayed_percent;
  //bool simulate_panel; // NSF remove in future
  unsigned char simulator_packet[AQ_MAXPKTLEN+1];
  bool simulator_packet_updated;
  int simulator_packet_length;
  
  //bool simulator_active; // should be redundant with other two
  unsigned char simulator_id;
  //simulator_type simulator_active;
  emulation_type simulator_active;

  bool aqManagerActive;
  int open_websockets;
  struct programmingthread active_thread;
  struct action unactioned;
  unsigned char raw_status[AQ_PSTLEN];
  // Multiple threads update this value.
  volatile bool updated;
  char self[AQ_MSGLEN*2];

  #ifdef AQ_MANAGER
  volatile bool run_slogger;
   int slogger_packets;
   bool slogger_debug;
   char slogger_ids[20];
  #endif

  #ifdef AQ_RS16
  int rs16_vbutton_start;
  int rs16_vbutton_end;
  #endif
  #ifdef AQ_PDA
  int pool_heater_index;
  int spa_heater_index;
  int solar_heater_index;
  #endif
  // Timing for DEBUG
  #ifdef AQ_DEBUG
  struct timespec last_active_time;
  struct timespec start_active_time;
  #endif

  // Overcome color light bug, by reconnecting allbutton panel.
  //bool reconnectAllButton;
};


#endif