# aqualinkd.conf
#

# The directory where the web files are stored

web_directory=/var/www/aqualinkd/

# Log to file, comment out if you do not want to log to file
#log_file=/var/log/aqualinkd.log

# The log level. [DEBUG_DERIAL, DEBUG, INFO, NOTICE, WARNING, ERROR]
# Pick the highest level, and all levels below will be sent to syslog.
# your syslog settings may be set to only display messages above a certian level
# in which case make sure you use the log_file settings to capture everything
# you want when debugging
# so, NOTICE also prints WARNING & ERROR
#     DEBUG_SERIAL would print everything possible

#log_level=DEBUG
log_level=INFO
#log_level=NOTICE

# The socket port that the daemon listens to
# If you change this from 80, remember to update aqualink.service.avahi
socket_port=80

# The serial port the daemon access to read the Aqualink RS8
serial_port=/dev/ttyUSB0

# If equiptment is in freeze protect mode some commands like pump_off / spa_on are
# ignored.  You can force these to work by setting the below.
override_freeze_protect = no

# mqtt stuff
#mqtt_address = localhost:1883
#mqtt_user = someusername    
#mqtt_passwd = somepassword
#mqtt_dz_pub_topic = domoticz/in
#mqtt_dz_sub_topic = domoticz/out
#mqtt_aq_topic = aqualinkd

# The id of the Aqualink terminal device. Devices probed by RS8 master are:
# 08-0b, 10-13, 18-1b, 20-23,
#
device_id=0x0a

# Light probramming mode. 0=safe mode, but slow. 
# any number greater is seconds to wait between button presses.  
# 0.4 seems to be the minimum. (workd for light modes below 10 presses)
# 0.6 seems to work about 95% of the time, but above 20 presses can be hit or miss.
# 0 will simply wait for the controler to send the response back before sending the next, so is equivelent to about 1.2
light_programming_mode=0

# Domoticz ID's for temps.
air_temp_dzidx=13
pool_water_temp_dzidx=14
spa_water_temp_dzidx=15
#SWG_percent_dzidx=998
#SWG_PPM_dzidx=999

# Labels for standard butons (shown in web UI), and domoticz idx's
button_01_label=Filter Pump
button_01_dzidx=37 

button_02_label=Spa Mode
button_02_dzidx=38 

button_03_label=Cleaner
button_03_dzidx=39 

button_04_label=Waterfall
button_04_dzidx=40 

button_05_label=Spa Blower
button_05_dzidx=41 

button_06_label=Pool Light
button_06_dzidx=42 

button_07_label=Spa Light
button_07_dzidx=43 

button_08_label=NONE
button_08_dzidx=NONE 

button_09_label=NONE
button_09_dzidx=NONE 

button_10_label=Pool Heater
button_10_dzidx=44

button_11_label=Spa Heater
button_11_dzidx=56

button_12_label=Solar Heater
button_12_dzidx=NONE