#include <stdio.h>
#include <stdarg.h>
#include <stdlib.h>
#include <pthread.h>
#include <unistd.h>
#include <string.h>
#include "aqualink.h"
#include "allbutton_aq_programmer.h"
#include "utils.h"
#include "aq_programmer.h"
#include "aq_serial.h"
#include "color_lights.h"
#include "devices_jandy.h"
bool waitForButtonState(struct aqualinkdata *aq_data, aqkey* button, aqledstate state, int numMessageReceived);
bool waitForMessage(struct aqualinkdata *aq_data, char* message, int numMessageReceived);
bool waitForEitherMessage(struct aqualinkdata *aq_data, char* message1, char* message2, int numMessageReceived);
bool select_sub_menu_item(struct aqualinkdata *aq_data, char* item_string);
bool select_menu_item(struct aqualinkdata *aq_data, char* item_string);
void send_cmd(unsigned char cmd);
void cancel_menu();
void waitfor_queue2empty();
void longwaitfor_queue2empty();
int _expectNextMessage = 0;
unsigned char _allb_last_sent_command = NUL;
#define MAX_STACK 20
int _allb_stack_place = 0;
unsigned char _allb_commands[MAX_STACK];
//unsigned char pgm_allb_commands[MAX_STACK];
unsigned char _allb_pgm_command = NUL;
//unsigned char _ot_allb_pgm_command = NUL;
bool _last_sent_was_cmd = false;
bool push_allb_cmd(unsigned char cmd);
// External view of adding to queue
//void aq_send_cmd(unsigned char cmd) {
void aq_send_allb_cmd(unsigned char cmd) {
push_allb_cmd(cmd);
}
bool push_allb_cmd(unsigned char cmd) {
//LOG(ALLB_LOG, LOG_NOTICE, "push_aq_cmd '0x%02hhx'\n", cmd);
if (_allb_stack_place < MAX_STACK) {
_allb_commands[_allb_stack_place] = cmd;
_allb_stack_place++;
} else {
LOG(ALLB_LOG, LOG_ERR, "Command queue overflow, too many unsent commands to RS control panel\n");
return false;
}
return true;
}
int get_allb_queue_length()
{
return _allb_stack_place;
}
unsigned char pop_allb_cmd(struct aqualinkdata *aq_data)
{
unsigned char cmd = NUL;
if ( _expectNextMessage > 0 &&
(aq_data->last_packet_type == CMD_MSG || aq_data->last_packet_type == CMD_MSG_LONG || aq_data->last_packet_type == CMD_MSG_LOOP_ST))
{
_expectNextMessage=0;
} else if (_expectNextMessage > 3) {
// NSF Should probably check this is a status command AND we are in programming mode.
LOG(ALLB_LOG, LOG_ERR, "Did not receive expected reply from last RS SEND command, resending '0x%02hhx'\n", _allb_last_sent_command);
_expectNextMessage=0;
return _allb_last_sent_command;
} else if (_expectNextMessage > 0) {
_expectNextMessage++;
}
// Only send commands on status messages and is we are not in programming mode.
// In programming move, we don't use the queue.
// Are we in programming mode and it's not ONETOUCH programming mode
if (in_programming_mode(aq_data) && ( in_ot_programming_mode(aq_data) == false && in_iaqt_programming_mode(aq_data) == false )) {
//if (aq_data->active_thread.thread_id != 0) {
if ( _allb_pgm_command != NUL && aq_data->last_packet_type == CMD_STATUS) {
cmd = _allb_pgm_command;
_allb_pgm_command = NUL;
LOG(ALLB_LOG, LOG_DEBUG_SERIAL, "RS SEND cmd '0x%02hhx' (programming)\n", cmd);
} else if (_allb_pgm_command != NUL) {
LOG(ALLB_LOG, LOG_DEBUG_SERIAL, "RS Waiting to send cmd '0x%02hhx' (programming)\n", _allb_pgm_command);
} else {
LOG(ALLB_LOG, LOG_DEBUG_SERIAL, "RS SEND cmd '0x%02hhx' empty queue (programming)\n", cmd);
}
} else if (_allb_stack_place > 0 && aq_data->last_packet_type == CMD_STATUS ) {
cmd = _allb_commands[0];
_allb_stack_place--;
LOG(ALLB_LOG, LOG_DEBUG_SERIAL, "RS SEND cmd '0x%02hhx'\n", cmd);
//LOG(ALLB_LOG, LOG_NOTICE, "pop_cmd '0x%02hhx'\n", cmd);
memmove(&_allb_commands[0], &_allb_commands[1], sizeof(unsigned char) * _allb_stack_place ) ;
} else {
LOG(ALLB_LOG, LOG_DEBUG_SERIAL, "RS SEND cmd '0x%02hhx'\n", cmd);
}
//printf("RSM sending cmd '0x%02hhx' in reply to '0x%02hhx'\n",cmd,aq_data->last_packet_type);
if (cmd == KEY_ENTER || cmd == KEY_RIGHT || cmd == KEY_LEFT || cmd == KEY_MENU ) { //KEY_CANCEL KEY_HOLD KEY_OVERRIDE
_expectNextMessage=1;
_allb_last_sent_command = cmd;
}
return cmd;
}
bool setAqualinkNumericField_new(struct aqualinkdata *aq_data, char *value_label, int value, int increment);
bool setAqualinkNumericField(struct aqualinkdata *aq_data, char *value_label, int value)
{
return setAqualinkNumericField_new(aq_data, value_label, value, 1);
}
bool setAqualinkNumericField_new(struct aqualinkdata *aq_data, char *value_label, int value, int increment)
{
LOG(ALLB_LOG, LOG_DEBUG,"Setting menu item '%s' to %d\n",value_label, value);
//char leading[10]; // description of the field (POOL, SPA, FRZ)
int current_val=-1; // integer value of the current set point
//char trailing[10]; // the degrees and scale
char searchBuf[20];
sprintf(searchBuf, "^%s", value_label);
int val_len = strlen(value_label);
int i=0;
do
{
if (waitForMessage(aq_data, searchBuf, 4) != true) {
LOG(ALLB_LOG, LOG_WARNING, "AQ_Programmer Could not set numeric input '%s', not found\n",value_label);
cancel_menu();
return false;
}
//LOG(ALLB_LOG, LOG_DEBUG,"WAITING for kick value=%d\n",current_val);
//sscanf(aq_data->last_message, "%s %d%s", leading, ¤t_val, trailing);
//sscanf(aq_data->last_message, "%*[^0123456789]%d", ¤t_val);
sscanf(&aq_data->last_message[val_len], "%*[^0123456789]%d", ¤t_val);
LOG(ALLB_LOG, LOG_DEBUG, "%s set to %d, looking for %d\n",value_label,current_val,value);
if(value > current_val) {
// Increment the field.
sprintf(searchBuf, "%s %d", value_label, current_val+increment);
send_cmd(KEY_RIGHT);
}
else if(value < current_val) {
// Decrement the field.
sprintf(searchBuf, "%s %d", value_label, current_val-increment);
send_cmd(KEY_LEFT);
}
else {
// Just send ENTER. We are at the right value.
sprintf(searchBuf, "%s %d", value_label, current_val);
send_cmd(KEY_ENTER);
}
if (i++ >= 100) {
LOG(ALLB_LOG, LOG_WARNING, "AQ_Programmer Could not set numeric input '%s', to '%d'\n",value_label,value);
send_cmd(KEY_ENTER);
break;
}
} while(value != current_val);
return true;
}
bool OLD_setAqualinkNumericField_OLD(struct aqualinkdata *aq_data, char *value_label, int value)
{ // Works for everything but not SWG
LOG(ALLB_LOG, LOG_DEBUG,"Setting menu item '%s' to %d\n",value_label, value);
char leading[10]; // description of the field (POOL, SPA, FRZ)
int current_val; // integer value of the current set point
char trailing[10]; // the degrees and scale
char searchBuf[20];
sprintf(searchBuf, "^%s", value_label);
do
{
if (waitForMessage(aq_data, searchBuf, 3) != true) {
LOG(ALLB_LOG, LOG_WARNING, "AQ_Programmer Could not set numeric input '%s', not found\n",value_label);
cancel_menu();
return false;
}
//LOG(ALLB_LOG, LOG_DEBUG,"WAITING for kick value=%d\n",current_val);
sscanf(aq_data->last_message, "%s %d%s", leading, ¤t_val, trailing);
LOG(ALLB_LOG, LOG_DEBUG, "%s set to %d, looking for %d\n",value_label,current_val,value);
if(value > current_val) {
// Increment the field.
sprintf(searchBuf, "%s %d", value_label, current_val+1);
send_cmd(KEY_RIGHT);
}
else if(value < current_val) {
// Decrement the field.
sprintf(searchBuf, "%s %d", value_label, current_val-1);
send_cmd(KEY_LEFT);
}
else {
// Just send ENTER. We are at the right value.
sprintf(searchBuf, "%s %d", value_label, current_val);
send_cmd(KEY_ENTER);
}
} while(value != current_val);
return true;
}
/*
void *threadded_send_cmd( void *ptr )
{
struct programmingThreadCtrl *threadCtrl;
threadCtrl = (struct programmingThreadCtrl *) ptr;
struct aqualinkdata *aq_data = threadCtrl->aq_data;
waitForSingleThreadOrTerminate(threadCtrl, AQ_SEND_CMD);
send_cmd( (unsigned char)*threadCtrl->thread_args, aq_data);
cleanAndTerminateThread(threadCtrl);
return ptr;
}
*/
void *set_allbutton_boost( void *ptr )
{
struct programmingThreadCtrl *threadCtrl;
threadCtrl = (struct programmingThreadCtrl *) ptr;
struct aqualinkdata *aq_data = threadCtrl->aq_data;
waitForSingleThreadOrTerminate(threadCtrl, AQ_SET_BOOST);
/*
menu
<find menu>
BOOST POOL
<wait 2 messages>
PRESS ENTER* TO START BOOST POOL
<press enter>
<Menu when in boost>
BOOST POOL 23:59 REMAINING
menu
<find menu>
BOOST POOL
<find menu>
STOP BOOST POOL
<press enter>
*/
int val = atoi((char*)threadCtrl->thread_args);
LOG(ALLB_LOG, LOG_DEBUG, "programming BOOST to %s\n", val==true?"On":"Off");
if ( select_menu_item(aq_data, "BOOST POOL") != true ) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select BOOST POOL menu\n");
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
if (val==true) {
waitForMessage(threadCtrl->aq_data, "TO START BOOST POOL", 5);
send_cmd(KEY_ENTER);
longwaitfor_queue2empty();
} else {
int wait_messages = 5;
int i=0;
while( i++ < wait_messages)
{
waitForMessage(aq_data, "STOP BOOST POOL", 1);
if (stristr(aq_data->last_message, "STOP BOOST POOL") != NULL) {
// This is a really bad hack, message sequence is out for boost for some reason, so as soon as we see stop message, force enter key.
//_allb_pgm_command = KEY_ENTER;
send_cmd(KEY_ENTER);
LOG(ALLB_LOG, LOG_DEBUG, "**** FOUND STOP BOOST POOL ****\n");
//waitfor_queue2empty();
break;
} else {
LOG(ALLB_LOG, LOG_DEBUG, "Find item in Menu: loop %d of %d looking for 'STOP BOOST POOL' received message '%s'\n",i,wait_messages,aq_data->last_message);
delay(200);
if (stristr(aq_data->last_message, "STOP BOOST POOL") != NULL) {
//_allb_pgm_command = KEY_ENTER;
send_cmd(KEY_ENTER);
LOG(ALLB_LOG, LOG_DEBUG, "**** FOUND STOP BOOST POOL ****\n");
break;
}
send_cmd(KEY_RIGHT);
//printf("WAIT\n");
longwaitfor_queue2empty();
//printf("FINISHED WAIT\n");
}
//waitfor_queue2empty();
//waitForMessage(aq_data, NULL, 1);
}
if (i < wait_messages) {
// Takes ages to see bost is off from menu, to set it here.
setSWGboost(aq_data, false);
}
/*
// Extra message overcome.
send_cmd(KEY_RIGHT);
waitfor_queue2empty();
if ( select_sub_menu_item(aq_data, "STOP BOOST POOL") != true ) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select STOP BOOST POOL menu\n");
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}*/
//send_cmd(KEY_ENTER);
}
waitForMessage(aq_data,NULL, 1);
cleanAndTerminateThread(threadCtrl);
// just stop compiler error, ptr is not valid as it's just been freed
return ptr;
}
void *set_allbutton_SWG( void *ptr )
{
struct programmingThreadCtrl *threadCtrl;
threadCtrl = (struct programmingThreadCtrl *) ptr;
struct aqualinkdata *aq_data = threadCtrl->aq_data;
waitForSingleThreadOrTerminate(threadCtrl, AQ_SET_SWG_PERCENT);
int val = atoi((char*)threadCtrl->thread_args);
val = setpoint_check(SWG_SETPOINT, val, aq_data);
//LOG(ALLB_LOG, LOG_NOTICE, "programming SWG percent to %d\n", val);
if ( select_menu_item(aq_data, "SET AQUAPURE") != true ) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select SET AQUAPURE menu\n");
LOG(ALLB_LOG, LOG_ERR, "%s failed\n", ptypeName( aq_data->active_thread.ptype ) );
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
// If spa is on, set SWG for spa, if not set SWG for pool
if (aq_data->aqbuttons[SPA_INDEX].led->state != OFF) {
if (select_sub_menu_item(aq_data, "SET SPA SP") != true) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select SWG setpoint menu for SPA\n");
LOG(ALLB_LOG, LOG_ERR, "%s failed\n", ptypeName( aq_data->active_thread.ptype ) );
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
setAqualinkNumericField_new(aq_data, "SPA SP", val, 5);
} else {
if (select_sub_menu_item(aq_data, "SET POOL SP") != true) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select SWG setpoint menu\n");
LOG(ALLB_LOG, LOG_ERR, "%s failed\n", ptypeName( aq_data->active_thread.ptype ) );
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
setAqualinkNumericField_new(aq_data, "POOL SP", val, 5);
}
// Let everyone know we set SWG, if it failed we will update on next message, unless it's 0.
setSWGpercent(aq_data, val); // Don't use chageSWGpercent as we are in programming mode.
/*
if (select_sub_menu_item(aq_data, "SET POOL SP") != true) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select SWG setpoint menu\n");
cancel_menu(aq_data);
cleanAndTerminateThread(threadCtrl);
return ptr;
}
setAqualinkNumericField_new(aq_data, "POOL SP", val, 5);
*/
// usually miss this message, not sure why, but wait anyway to make sure programming has ended
// NSF have see the below message RS Message :-
// 'Pool set to 20%'
// 'POOL SP IS SET TO 20%'
waitForMessage(threadCtrl->aq_data, "SET TO", 1);
//waitForMessage(threadCtrl->aq_data, "POOL SP IS SET TO", 1);
// Since we read % directly from RS message, wait for another few messages that way
// We won't registed a SWG bounce, since we already told clients SWG was at new % before programming started
waitForMessage(threadCtrl->aq_data, NULL, 1);
cleanAndTerminateThread(threadCtrl);
// just stop compiler error, ptr is not valid as it's just been freed
return ptr;
}
void *get_allbutton_aux_labels( void *ptr )
{
struct programmingThreadCtrl *threadCtrl;
threadCtrl = (struct programmingThreadCtrl *) ptr;
struct aqualinkdata *aq_data = threadCtrl->aq_data;
waitForSingleThreadOrTerminate(threadCtrl, AQ_GET_AUX_LABELS);
if ( select_menu_item(aq_data, "REVIEW") != true ) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select REVIEW menu\n");
LOG(ALLB_LOG, LOG_ERR, "%s failed\n", ptypeName( aq_data->active_thread.ptype ) );
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
if (select_sub_menu_item(aq_data, "AUX LABELS") != true) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select AUX LABELS menu\n");
LOG(ALLB_LOG, LOG_ERR, "%s failed\n", ptypeName( aq_data->active_thread.ptype ) );
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
waitForMessage(aq_data, NULL, 5); // Receive 5 messages
cleanAndTerminateThread(threadCtrl);
// just stop compiler error, ptr is not valid as it's just been freed
return ptr;
}
void *set_allbutton_light_colormode( void *ptr )
{
int i;
struct programmingThreadCtrl *threadCtrl;
threadCtrl = (struct programmingThreadCtrl *) ptr;
struct aqualinkdata *aq_data = threadCtrl->aq_data;
waitForSingleThreadOrTerminate(threadCtrl, AQ_SET_LIGHTCOLOR_MODE);
char *buf = (char*)threadCtrl->thread_args;
const char *mode_name;
int val = atoi(&buf[0]);
int btn = atoi(&buf[5]);
int typ = atoi(&buf[10]);
bool use_current_mode = false;
if (btn < 0 || btn >= aq_data->total_buttons ) {
LOG(ALLB_LOG, LOG_ERR, "Can't program light mode on button %d\n", btn);
cleanAndTerminateThread(threadCtrl);
return ptr;
}
aqkey *button = &aq_data->aqbuttons[btn];
unsigned char code = button->code;
//LOG(ALLB_LOG, LOG_NOTICE, "Light Programming #: %d, on button: %s, color light type: %d\n", val, button->label, typ);
if (val <= 0) {
use_current_mode = true;
LOG(ALLB_LOG, LOG_INFO, "Light Programming #: %d, on button: %s, color light type: %d, using current mode\n", val, button->label, typ);
} else {
mode_name = light_mode_name(typ, val-1, ALLBUTTON);
use_current_mode = false;
if (mode_name == NULL) {
LOG(ALLB_LOG, LOG_ERR, "Light Programming #: %d, on button: %s, color light type: %d, couldn't find mode name '%s'\n", val, button->label, typ, mode_name);
cleanAndTerminateThread(threadCtrl);
return ptr;
} else {
LOG(ALLB_LOG, LOG_INFO, "Light Programming #: %d, on button: %s, color light type: %d, name '%s'\n", val, button->label, typ, mode_name);
}
}
/*
// Simply turn the light off if value is 0
if (val <= 0) {
if ( button->led->state == ON ) {
send_cmd(code);
}
cleanAndTerminateThread(threadCtrl);
return ptr;
}
*/
// Needs to start programming sequence with light off
if ( button->led->state == ON ) {
LOG(ALLB_LOG, LOG_INFO, "Light Programming Initial state on, turning off\n");
send_cmd(code);
waitfor_queue2empty();
if ( !waitForMessage(threadCtrl->aq_data, "OFF", 5)) // Message like 'Aux3 Off'
LOG(ALLB_LOG, LOG_ERR, "Light Programming didn't receive OFF message\n");
}
// Now turn on and wait for the message "color mode name<>*"
send_cmd(code);
waitfor_queue2empty();
i=0;
int waitCounter=12;
do{
LOG(ALLB_LOG, LOG_INFO,"Light program wait for message\n");
if ( !waitForMessage(threadCtrl->aq_data, "~*", waitCounter))
LOG(ALLB_LOG, LOG_ERR, "Light Programming didn't receive color light mode message\n");
// Wait for less messages after first try. We get a lot of repeat messages before the one we need.
waitCounter = 3;
if (use_current_mode) {
LOG(ALLB_LOG, LOG_INFO, "Light Programming using color mode %s\n",aq_data->last_message);
send_cmd(KEY_ENTER);
waitfor_queue2empty();
break;
} else if (strncasecmp(aq_data->last_message, mode_name, strlen(mode_name)) == 0) {
LOG(ALLB_LOG, LOG_INFO, "Light Programming found color mode %s\n",mode_name);
send_cmd(KEY_ENTER);
waitfor_queue2empty();
break;
}
send_cmd(KEY_RIGHT);
waitfor_queue2empty();
// Just clear current message before waiting for next, since the test in the do can't distinguish
// as both messages end in "~*"
waitForMessage(threadCtrl->aq_data, NULL, 1);
i++;
} while (i <= LIGHT_COLOR_OPTIONS);
if (i == LIGHT_COLOR_OPTIONS) {
LOG(ALLB_LOG, LOG_ERR, "Light Programming didn't receive color light mode message for '%s'\n",use_current_mode?"light program":mode_name);
} else {
// Set before we are called.
//updateButtonLightProgram(aq_data, val, btn);
}
cleanAndTerminateThread(threadCtrl);
// just stop compiler error, ptr is not valid as it's just been freed
return ptr;
}
void *set_allbutton_light_programmode( void *ptr )
{
int i;
struct programmingThreadCtrl *threadCtrl;
threadCtrl = (struct programmingThreadCtrl *) ptr;
struct aqualinkdata *aq_data = threadCtrl->aq_data;
waitForSingleThreadOrTerminate(threadCtrl, AQ_SET_LIGHTPROGRAM_MODE);
char *buf = (char*)threadCtrl->thread_args;
int val = atoi(&buf[0]);
int btn = atoi(&buf[5]);
int iOn = atoi(&buf[10]);
int iOff = atoi(&buf[15]);
float pmode = atof(&buf[20]);
if (btn < 0 || btn >= aq_data->total_buttons ) {
LOG(ALLB_LOG, LOG_ERR, "Can't program light mode on button %d\n", btn);
cleanAndTerminateThread(threadCtrl);
return ptr;
}
aqkey *button = &aq_data->aqbuttons[btn];
unsigned char code = button->code;
LOG(ALLB_LOG, LOG_INFO, "Light Programming #: %d, on button: %s, with pause mode: %f (initial on=%d, initial off=%d)\n", val, button->label, pmode, iOn, iOff);
// Simply turn the light off if value is 0
if (val <= 0) {
if ( button->led->state == ON ) {
send_cmd(code);
}
cleanAndTerminateThread(threadCtrl);
return ptr;
}
const int seconds = 1000;
// Needs to start programming sequence with light on, if off we need to turn on for 15 seconds
// before we can send the next off.
if ( button->led->state != ON ) {
LOG(ALLB_LOG, LOG_INFO, "Light Programming Initial state off, turning on for %d seconds\n",iOn);
send_cmd(code);
delay(iOn * seconds);
}
LOG(ALLB_LOG, LOG_INFO, "Light Programming turn off for %d seconds\n",iOff);
// Now need to turn off for between 11 and 14 seconds to reset light.
send_cmd(code);
delay(iOff * seconds);
// Now light is reset, pulse the appropiate number of times to advance program.
LOG(ALLB_LOG, LOG_INFO, "Light Programming button pulsing on/off %d times\n", val);
// Program light in safe mode (slowley), or quick mode
if (pmode > 0) {
for (i = 1; i < (val * 2); i++) {
LOG(ALLB_LOG, LOG_INFO, "Light Programming button press number %d - %s of %d\n", i, i % 2 == 0 ? "Off" : "On", val);
send_cmd(code);
waitfor_queue2empty();
delay(pmode * seconds); // 0.3 works, but using 0.4 to be safe
}
} else {
for (i = 1; i < val; i++) {
const int dt = 0.5; // Time to wait after receiving conformation of light on/off
LOG(ALLB_LOG, LOG_INFO, "Light Programming button press number %d - %s of %d\n", i, "ON", val);
send_cmd(code);
waitForButtonState(aq_data, button, ON, 2);
delay(dt * seconds);
LOG(ALLB_LOG, LOG_INFO, "Light Programming button press number %d - %s of %d\n", i, "OFF", val);
send_cmd(code);
waitForButtonState(aq_data, button, OFF, 2);
delay(dt * seconds);
}
LOG(ALLB_LOG, LOG_INFO, "Finished - Light Programming button press number %d - %s of %d\n", i, "ON", val);
send_cmd(code);
waitfor_queue2empty();
}
//waitForButtonState(aq_data, &aq_data->aqbuttons[btn], ON, 2);
// set before we are called
//updateButtonLightProgram(aq_data, val, btn);
cleanAndTerminateThread(threadCtrl);
// just stop compiler error, ptr is not valid as it's just been freed
return ptr;
}
void *set_allbutton_pool_heater_temps( void *ptr )
{
struct programmingThreadCtrl *threadCtrl;
threadCtrl = (struct programmingThreadCtrl *) ptr;
struct aqualinkdata *aq_data = threadCtrl->aq_data;
char *name;
char *menu_name;
waitForSingleThreadOrTerminate(threadCtrl, AQ_SET_POOL_HEATER_TEMP);
int val = atoi((char*)threadCtrl->thread_args);
/*
if (val > HEATER_MAX) {
val = HEATER_MAX;
} else if ( val < MEATER_MIN) {
val = MEATER_MIN;
}
*/
val = setpoint_check(POOL_HTR_SETOINT, val, aq_data);
// NSF IF in TEMP1 / TEMP2 mode, we need C range of 1 to 40 is 2 to 40 for TEMP1, 1 to 39 TEMP2
if (isSINGLE_DEV_PANEL){
name = "TEMP1";
menu_name = "SET TEMP1";
} else {
name = "POOL";
menu_name = "SET POOL TEMP";
}
LOG(ALLB_LOG, LOG_DEBUG, "Setting pool heater setpoint to %d\n", val);
//setAqualinkTemp(aq_data, "SET TEMP", "SET POOL TEMP", NULL, "POOL", val);
if ( select_menu_item(aq_data, "SET TEMP") != true ) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select SET TEMP menu\n");
LOG(ALLB_LOG, LOG_ERR, "%s failed\n", ptypeName( aq_data->active_thread.ptype ) );
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
//if (select_sub_menu_item(aq_data, "SET POOL TEMP") != true) {
if (select_sub_menu_item(aq_data, menu_name) != true) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select SET POOL TEMP menu\n");
LOG(ALLB_LOG, LOG_ERR, "%s failed\n", ptypeName( aq_data->active_thread.ptype ) );
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
if (isSINGLE_DEV_PANEL){
// Need to get pass this message 'TEMP1 MUST BE SET HIGHER THAN TEMP2'
// and get this message 'TEMP1 20�C ~*'
// Before going to numeric field.
waitForMessage(threadCtrl->aq_data, "MUST BE SET", 5);
send_cmd(KEY_LEFT);
while (stristr(aq_data->last_message, "MUST BE SET") != NULL) {
delay(500);
}
}
//setAqualinkNumericField(aq_data, "POOL", val);
setAqualinkNumericField(aq_data, name, val);
// usually miss this message, not sure why, but wait anyway to make sure programming has ended
waitForMessage(threadCtrl->aq_data, "POOL TEMP IS SET TO", 1);
cleanAndTerminateThread(threadCtrl);
// just stop compiler error, ptr is not valid as it's just been freed
return ptr;
}
void *set_allbutton_spa_heater_temps( void *ptr )
{
struct programmingThreadCtrl *threadCtrl;
threadCtrl = (struct programmingThreadCtrl *) ptr;
struct aqualinkdata *aq_data = threadCtrl->aq_data;
waitForSingleThreadOrTerminate(threadCtrl, AQ_SET_SPA_HEATER_TEMP);
int val = atoi((char*)threadCtrl->thread_args);
char *name;
char *menu_name;
/*
if (val > HEATER_MAX) {
val = HEATER_MAX;
} else if ( val < MEATER_MIN) {
val = MEATER_MIN;
}*/
val = setpoint_check(SPA_HTR_SETOINT, val, aq_data);
// NSF IF in TEMP1 / TEMP2 mode, we need C range of 1 to 40 is 2 to 40 for TEMP1, 1 to 39 TEMP2
if (isSINGLE_DEV_PANEL){
name = "TEMP2";
menu_name = "SET TEMP2";
} else {
name = "SPA";
menu_name = "SET SPA TEMP";
}
LOG(ALLB_LOG, LOG_DEBUG, "Setting spa heater setpoint to %d\n", val);
//setAqualinkTemp(aq_data, "SET TEMP", "SET SPA TEMP", NULL, "SPA", val);
if ( select_menu_item(aq_data, "SET TEMP") != true ) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select SET TEMP menu\n");
LOG(ALLB_LOG, LOG_ERR, "%s failed\n", ptypeName( aq_data->active_thread.ptype ) );
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
//if (select_sub_menu_item(aq_data, "SET SPA TEMP") != true) {
if (select_sub_menu_item(aq_data, menu_name) != true) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select SET SPA TEMP menu\n");
LOG(ALLB_LOG, LOG_ERR, "%s failed\n", ptypeName( aq_data->active_thread.ptype ) );
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
if (isSINGLE_DEV_PANEL){
// Need to get pass this message 'TEMP2 MUST BE SET LOWER THAN TEMP1'
// and get this message 'TEMP2 20�C ~*'
// Before going to numeric field.
waitForMessage(threadCtrl->aq_data, "MUST BE SET", 5);
send_cmd(KEY_LEFT);
while (stristr(aq_data->last_message, "MUST BE SET") != NULL) {
delay(500);
}
}
//setAqualinkNumericField(aq_data, "SPA", val);
setAqualinkNumericField(aq_data, name, val);
// usually miss this message, not sure why, but wait anyway to make sure programming has ended
waitForMessage(threadCtrl->aq_data, "SPA TEMP IS SET TO", 1);
cleanAndTerminateThread(threadCtrl);
// just stop compiler error, ptr is not valid as it's just been freed
return ptr;
}
void *set_allbutton_freeze_heater_temps( void *ptr )
{
struct programmingThreadCtrl *threadCtrl;
threadCtrl = (struct programmingThreadCtrl *) ptr;
struct aqualinkdata *aq_data = threadCtrl->aq_data;
waitForSingleThreadOrTerminate(threadCtrl, AQ_SET_FRZ_PROTECTION_TEMP);
int val = atoi((char*)threadCtrl->thread_args);
/*
if (val > FREEZE_PT_MAX) {
val = FREEZE_PT_MAX;
} else if ( val < FREEZE_PT_MIN) {
val = FREEZE_PT_MIN;
}
*/
val = setpoint_check(FREEZE_SETPOINT, val, aq_data);
LOG(ALLB_LOG, LOG_DEBUG, "Setting sfreeze protection to %d\n", val);
//setAqualinkTemp(aq_data, "SYSTEM SETUP", "FRZ PROTECT", "TEMP SETTING", "FRZ", val);
if ( select_menu_item(aq_data, "SYSTEM SETUP") != true ) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select SYSTEM SETUP menu\n");
LOG(ALLB_LOG, LOG_ERR, "%s failed\n", ptypeName( aq_data->active_thread.ptype ) );
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
if (select_sub_menu_item(aq_data, "FRZ PROTECT") != true) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select FRZ PROTECT menu\n");
LOG(ALLB_LOG, LOG_ERR, "%s failed\n", ptypeName( aq_data->active_thread.ptype ) );
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
if (select_sub_menu_item(aq_data, "TEMP SETTING") != true) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select TEMP SETTING menu\n");
LOG(ALLB_LOG, LOG_ERR, "%s failed\n", ptypeName( aq_data->active_thread.ptype ) );
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
setAqualinkNumericField(aq_data, "FRZ", val);
waitForMessage(threadCtrl->aq_data, "FREEZE PROTECTION IS SET TO", 3);
cleanAndTerminateThread(threadCtrl);
// just stop compiler error, ptr is not valid as it's just been freed
return ptr;
}
void *set_allbutton_time( void *ptr )
{
struct programmingThreadCtrl *threadCtrl;
threadCtrl = (struct programmingThreadCtrl *) ptr;
struct aqualinkdata *aq_data = threadCtrl->aq_data;
waitForSingleThreadOrTerminate(threadCtrl, AQ_SET_TIME);
//LOG(ALLB_LOG, LOG_NOTICE, "Setting time on aqualink\n");
time_t now = time(0); // get time now
struct tm *result = localtime(&now);
char hour[20];
// Add 10 seconds to time since this can take a while to program.
// 10 to 20 seconds whould be right, but since there are no seconds we can set, add 30 seconds to get close to minute.
// Should probably set this to program the next minute then wait before hitting the final enter command.
result->tm_sec += 30;
mktime(result);
if (result->tm_hour == 0)
sprintf(hour, "HOUR 12 AM");
else if (result->tm_hour <= 11)
sprintf(hour, "HOUR %d AM", result->tm_hour); // Need to fix compiler warning on new GCC, but %2d or %.2d does NOT give correct string
else if (result->tm_hour == 12)
sprintf(hour, "HOUR 12 PM");
else // Must be 13 or more
sprintf(hour, "HOUR %d PM", result->tm_hour - 12);
LOG(ALLB_LOG, LOG_DEBUG, "Setting time to %d/%d/%d %d:%d\n", result->tm_mon + 1, result->tm_mday, result->tm_year + 1900, result->tm_hour + 1, result->tm_min);
if ( select_menu_item(aq_data, "SET TIME") != true ) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select SET TIME menu\n");
LOG(ALLB_LOG, LOG_ERR, "%s failed\n", ptypeName( aq_data->active_thread.ptype ) );
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
setAqualinkNumericField(aq_data, "YEAR", result->tm_year + 1900);
setAqualinkNumericField(aq_data, "MONTH", result->tm_mon + 1);
setAqualinkNumericField(aq_data, "DAY", result->tm_mday);
//setAqualinkNumericFieldExtra(aq_data, "HOUR", 11, "PM");
select_sub_menu_item(aq_data, hour); // This will keep looping until it finds the right message
setAqualinkNumericField(aq_data, "MINUTE", result->tm_min);
send_cmd(KEY_ENTER);
cleanAndTerminateThread(threadCtrl);
// just stop compiler error, ptr is not valid as it's just been freed
return ptr;
}
void *get_allbutton_diag_model( void *ptr )
{
struct programmingThreadCtrl *threadCtrl;
threadCtrl = (struct programmingThreadCtrl *) ptr;
struct aqualinkdata *aq_data = threadCtrl->aq_data;
waitForSingleThreadOrTerminate(threadCtrl, AQ_GET_DIAGNOSTICS_MODEL);
if ( select_menu_item(aq_data, "SYSTEM SETUP") != true ) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select HELP menu\n");
LOG(ALLB_LOG, LOG_ERR, "%s failed\n", ptypeName( aq_data->active_thread.ptype ) );
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
if (select_sub_menu_item(aq_data, "DIAGNOSTICS") != true) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select DIAGNOSTICS menu\n");
LOG(ALLB_LOG, LOG_ERR, "%s failed\n", ptypeName( aq_data->active_thread.ptype ) );
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
waitForMessage(aq_data, NULL, 8); // Receive 8 messages
//8157 REV MMM | BATTERY OK | Cal: -27 0 6 | CONTROL PANEL #1 | CONTROL PANEL #3 | WATER SENSOR OK | AIR SENSOR OK | SOLAR SENSOR OPENED
cleanAndTerminateThread(threadCtrl);
// just stop compiler error, ptr is not valid as it's just been freed
return ptr;
}
void *get_allbutton_pool_spa_heater_temps( void *ptr )
{
//LOG(ALLB_LOG, LOG_DEBUG, "Could not select TEMP SET menu\n");
struct programmingThreadCtrl *threadCtrl;
threadCtrl = (struct programmingThreadCtrl *) ptr;
struct aqualinkdata *aq_data = threadCtrl->aq_data;
waitForSingleThreadOrTerminate(threadCtrl, AQ_GET_POOL_SPA_HEATER_TEMPS);
//LOG(ALLB_LOG, LOG_NOTICE, "Getting pool & spa heat setpoints from aqualink\n");
if ( select_menu_item(aq_data, "REVIEW") != true ) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select REVIEW menu\n");
LOG(ALLB_LOG, LOG_ERR, "Can't get heater setpoints from Control Panel\n");
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
if (select_sub_menu_item(aq_data, "TEMP SET") != true) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select TEMP SET menu\n");
LOG(ALLB_LOG, LOG_ERR, "Can't get heater setpoints from Control Panel\n");
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
// Should receive 'POOL TEMP IS SET TO xx' then 'SPA TEMP IS SET TO xx' then 'MAINTAIN TEMP IS (OFF|ON)'
// wait for the last message
waitForMessage(threadCtrl->aq_data, "MAINTAIN TEMP IS", 5);
//cancel_menu(threadCtrl->aq_data);
cleanAndTerminateThread(threadCtrl);
// just stop compiler error, ptr is not valid as it's just been freed
return ptr;
}
void *get_allbutton_freeze_protect_temp( void *ptr )
{
struct programmingThreadCtrl *threadCtrl;
threadCtrl = (struct programmingThreadCtrl *) ptr;
struct aqualinkdata *aq_data = threadCtrl->aq_data;
waitForSingleThreadOrTerminate(threadCtrl, AQ_GET_FREEZE_PROTECT_TEMP);
//LOG(ALLB_LOG, LOG_NOTICE, "Getting freeze protection setpoints\n");
if ( select_menu_item(aq_data, "REVIEW") != true ) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select REVIEW menu\n");
LOG(ALLB_LOG, LOG_ERR, "Can't get freeze setpoints from Control Panel\n");
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
if (select_sub_menu_item(aq_data, "FRZ PROTECT") != true) {
LOG(ALLB_LOG, LOG_WARNING, "Could not select FRZ PROTECT menu\n");
LOG(ALLB_LOG, LOG_ERR, "Can't get freeze setpoints from Control Panel\n");
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
waitForMessage(aq_data, "FREEZE PROTECTION IS SET TO", 6); // Changed from 3 to wait for multiple items to be listed
//cancel_menu(aq_data);
cleanAndTerminateThread(threadCtrl);
// just stop compiler error, ptr is not valid as it's just been freed
return ptr;
}
bool get_aqualink_program_for_button(struct aqualinkdata *aq_data, unsigned char cmd)
{
int rtnStringsWait = 7;
if (! waitForMessage(aq_data, "SELECT DEVICE TO REVIEW or PRESS ENTER TO END", rtnStringsWait))
return false;
LOG(ALLB_LOG, LOG_DEBUG, "Send key '%d'\n",cmd);
send_cmd(cmd);
return waitForEitherMessage(aq_data, "NOT SET", "TURNS ON", rtnStringsWait);
}
void *get_allbutton_programs( void *ptr )
{
struct programmingThreadCtrl *threadCtrl;
threadCtrl = (struct programmingThreadCtrl *) ptr;
struct aqualinkdata *aq_data = threadCtrl->aq_data;
char keys[10] = {KEY_PUMP, KEY_SPA, KEY_AUX1, KEY_AUX2, KEY_AUX3, KEY_AUX4, KEY_AUX5}; // KEY_AUX6 & KEY_AUX7 kill programming mode
waitForSingleThreadOrTerminate(threadCtrl, AQ_GET_PROGRAMS);
if ( select_menu_item(aq_data, "REVIEW") != true ) {
//LOG(ALLB_LOG, LOG_WARNING, "Could not select REVIEW menu\n");
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
if (select_sub_menu_item(aq_data, "PROGRAMS") != true) {
//LOG(ALLB_LOG, LOG_WARNING, "Could not select PROGRAMS menu\n");
cancel_menu();
cleanAndTerminateThread(threadCtrl);
return ptr;
}
unsigned int i;
for (i=0; i < strlen(keys); i++) {
//LOG(ALLB_LOG, LOG_DEBUG, "**** START program for key in loop %d\n",i);
if (! get_aqualink_program_for_button(aq_data, keys[i])) {
//LOG(ALLB_LOG, LOG_DEBUG, "**** Didn't find program for key in loop %d\n",i);
//cancel_menu(aq_data);
cleanAndTerminateThread(threadCtrl);
return ptr;
}
//LOG(ALLB_LOG, LOG_DEBUG, "**** Found program for key in loop %d\n",i);
}
if (waitForMessage(aq_data, "SELECT DEVICE TO REVIEW or PRESS ENTER TO END", 6)) {
//LOG(ALLB_LOG, LOG_DEBUG, "Send key ENTER\n");
send_cmd(KEY_ENTER);
} else {
//LOG(ALLB_LOG, LOG_DEBUG, "Send CANCEL\n");
cancel_menu();
}
//cancel_menu(aq_data);
cleanAndTerminateThread(threadCtrl);
// just stop compiler error, ptr is not valid as it's just been freed
return ptr;
}
/*
void send_cmd(unsigned char cmd, struct aqualinkdata *aq_data)
{
push_aq_cmd(cmd);
LOG(ALLB_LOG, LOG_INFO, "Queue send '0x%02hhx' to controller\n", cmd);
}
*/
void _waitfor_queue2empty(bool longwait)
{
int i=0;
if (_allb_pgm_command != NUL) {
LOG(ALLB_LOG, LOG_DEBUG, "Waiting for queue to empty\n");
} else {
LOG(ALLB_LOG, LOG_DEBUG, "Queue empty!\n");
return;
}
while ( (_allb_pgm_command != NUL) && ( i++ < (PROGRAMMING_POLL_COUNTER*(longwait?2:1) ) ) ) {
delay(PROGRAMMING_POLL_DELAY_TIME);
}
if (_allb_pgm_command != NUL) {
LOG(ALLB_LOG, LOG_WARNING, "Send command Queue did not empty, timeout\n");
} else {
LOG(ALLB_LOG, LOG_DEBUG, "Queue now empty!\n");
}
}
void waitfor_queue2empty()
{
_waitfor_queue2empty(false);
}
void longwaitfor_queue2empty()
{
_waitfor_queue2empty(true);
}
void send_cmd(unsigned char cmd)
{
waitfor_queue2empty();
_allb_pgm_command = cmd;
//delay(200);
LOG(ALLB_LOG, LOG_INFO, "Queue send '0x%02hhx' to controller (programming)\n", _allb_pgm_command);
}
void force_queue_delete()
{
if (_allb_pgm_command != NUL)
LOG(ALLB_LOG, LOG_INFO, "Really bad coding, don't use this in release\n");
_allb_pgm_command = NUL;
}
void cancel_menu()
{
send_cmd(KEY_CANCEL);
}
/*
* added functionality, if start of string is ^ use that as must start with in comparison
*/
bool waitForEitherMessage(struct aqualinkdata *aq_data, char* message1, char* message2, int numMessageReceived)
{
//LOG(ALLB_LOG, LOG_DEBUG, "waitForMessage %s %d %d\n",message,numMessageReceived,cmd);
waitfor_queue2empty(); // MAke sure the last command was sent
int i=0;
pthread_mutex_lock(&aq_data->active_thread.thread_mutex);
char* msgS1 = "";
char* msgS2 = "";
char* ptr = NULL;
if (message1 != NULL) {
if (message1[0] == '^')
msgS1 = &message1[1];
else
msgS1 = message1;
}
if (message2 != NULL) {
if (message2[0] == '^')
msgS2 = &message2[1];
else
msgS2 = message2;
}
while( ++i <= numMessageReceived)
{
LOG(ALLB_LOG, LOG_DEBUG, "loop %d of %d looking for '%s' OR '%s' received message1 '%s'\n",i,numMessageReceived,message1,message2,aq_data->last_message);
if (message1 != NULL) {
ptr = stristr(aq_data->last_message, msgS1);
if (ptr != NULL) { // match
LOG(ALLB_LOG, LOG_DEBUG, "String MATCH '%s'\n", msgS1);
if (msgS1 == message1) // match & don't care if first char
break;
else if (ptr == aq_data->last_message) // match & do care if first char
break;
}
}
if (message2 != NULL) {
ptr = stristr(aq_data->last_message, msgS2);
if (ptr != NULL) { // match
LOG(ALLB_LOG, LOG_DEBUG, "String MATCH '%s'\n", msgS2);
if (msgS2 == message2) // match & don't care if first char
break;
else if (ptr == aq_data->last_message) // match & do care if first char
break;
}
}
//LOG(ALLB_LOG, LOG_DEBUG, "looking for '%s' received message1 '%s'\n",message1,aq_data->last_message);
pthread_cond_wait(&aq_data->active_thread.thread_cond, &aq_data->active_thread.thread_mutex);
//LOG(ALLB_LOG, LOG_DEBUG, "loop %d of %d looking for '%s' received message1 '%s'\n",i,numMessageReceived,message1,aq_data->last_message);
}
pthread_mutex_unlock(&aq_data->active_thread.thread_mutex);
if (message1 != NULL && message2 != NULL && ptr == NULL) {
//logmessage1(LOG_ERR, "Could not select MENU of Aqualink control panel\n");
LOG(ALLB_LOG, LOG_ERR, "Did not find '%s'\n",message1);
return false;
}
LOG(ALLB_LOG, LOG_DEBUG, "Found message1 '%s' or '%s' in '%s'\n",message1,message2,aq_data->last_message);
return true;
}
bool waitForMessage(struct aqualinkdata *aq_data, char* message, int numMessageReceived)
{
LOG(ALLB_LOG, LOG_DEBUG, "waitForMessage %s %d\n",message,numMessageReceived);
// NSF Need to come back to this, as it stops on test enviornment but not real panel, so must be speed related.
//waitfor_queue2empty(); // MAke sure the last command was sent
int i=0;
pthread_mutex_lock(&aq_data->active_thread.thread_mutex);
char* msgS;
char* ptr = NULL;
if (message != NULL) {
if (message[0] == '^')
msgS = &message[1];
else
msgS = message;
}
while( ++i <= numMessageReceived)
{
if (message != NULL)
LOG(ALLB_LOG, LOG_DEBUG, "loop %d of %d looking for '%s', last message received '%s'\n",i,numMessageReceived,message,aq_data->last_message);
else
LOG(ALLB_LOG, LOG_DEBUG, "loop %d of %d waiting for next message, last message received '%s'\n",i,numMessageReceived,aq_data->last_message);
if (message != NULL) {
ptr = stristr(aq_data->last_message, msgS);
if (ptr != NULL) { // match
LOG(ALLB_LOG, LOG_DEBUG, "String MATCH\n");
if (msgS == message) // match & don't care if first char
break;
else if (ptr == aq_data->last_message) // match & do care if first char
break;
}
}
//LOG(ALLB_LOG, LOG_DEBUG, "looking for '%s' received message '%s'\n",message,aq_data->last_message);
//LOG(ALLB_LOG, LOG_DEBUG, "*** pthread_cond_wait() sleep\n");
pthread_cond_wait(&aq_data->active_thread.thread_cond, &aq_data->active_thread.thread_mutex);
//LOG(ALLB_LOG, LOG_DEBUG, "*** pthread_cond_wait() wake\n");
//LOG(ALLB_LOG, LOG_DEBUG, "loop %d of %d looking for '%s' received message '%s'\n",i,numMessageReceived,message,aq_data->last_message);
}
pthread_mutex_unlock(&aq_data->active_thread.thread_mutex);
if (message != NULL && ptr == NULL) {
//LOG(ALLB_LOG, LOG_ERR, "Could not select MENU of Aqualink control panel\n");
LOG(ALLB_LOG, LOG_DEBUG, "did not find '%s'\n",message);
return false;
} else if (message != NULL)
LOG(ALLB_LOG, LOG_DEBUG, "found message '%s' in '%s'\n",message,aq_data->last_message);
else
LOG(ALLB_LOG, LOG_DEBUG, "waited for %d message(s)\n",numMessageReceived);
return true;
}
bool select_menu_item(struct aqualinkdata *aq_data, char* item_string)
{
char* expectedMsg = "PRESS ENTER* TO SELECT";
//char* expectedMsg = "PROGRAM";
int wait_messages = 5;
bool found = false;
int tries = 0;
// Select the MENU and wait to get the RS8 respond.
while (found == false && tries <= 3) {
send_cmd(KEY_MENU);
found = waitForMessage(aq_data, expectedMsg, wait_messages);
tries++;
}
if (found == false)
return false;
// NSF This isn't needed and seems to cause issue on some controllers.
//send_cmd(KEY_ENTER, aq_data);
//waitForMessage(aq_data, NULL, 1);
return select_sub_menu_item(aq_data, item_string);
}
/*
bool select_menu_item(struct aqualinkdata *aq_data, char* item_string)
{
char* expectedMsg = "PRESS ENTER* TO SELECT";
int wait_messages = 6;
//int i=0;
// Select the MENU and wait to get the RS8 respond.
send_cmd(KEY_MENU, aq_data);
if (waitForMessage(aq_data, expectedMsg, wait_messages) == false)
return false;
send_cmd(KEY_ENTER, aq_data);
waitForMessage(aq_data, NULL, 1);
// Blindly wait for next message
//sendCmdWaitForReturn(aq_data, KEY_ENTER);
// Can't determin the first response
//delay(500);
return select_sub_menu_item(aq_data, item_string);
}
*/
//bool select_sub_menu_item(char* item_string, struct aqualinkdata *aq_data)
bool select_sub_menu_item(struct aqualinkdata *aq_data, char* item_string)
{
int wait_messages = 28;
int i=0;
waitfor_queue2empty();
while( (stristr(aq_data->last_message, item_string) == NULL) && ( i++ < wait_messages) )
{
LOG(ALLB_LOG, LOG_DEBUG, "Find item in Menu: loop %d of %d looking for '%s' received message '%s'\n",i,wait_messages,item_string,aq_data->last_message);
send_cmd(KEY_RIGHT);
waitfor_queue2empty(); // ADDED BACK MAY 2023 setting time warked better
//waitForMessage(aq_data, NULL, 1);
waitForMessage(aq_data, item_string, 1);
}
if (stristr(aq_data->last_message, item_string) == NULL) {
LOG(ALLB_LOG, LOG_ERR, "Could not find menu item '%s'\n",item_string);
return false;
}
LOG(ALLB_LOG, LOG_DEBUG, "Find item in Menu: loop %d of %d FOUND menu item '%s', sending ENTER command\n",i,wait_messages, item_string);
// Enter the mode specified by the argument.
send_cmd(KEY_ENTER);
waitForMessage(aq_data, NULL, 1);
//sendCmdWaitForReturn(aq_data, KEY_ENTER);
return true;
}
// NSF Need to test this, then use it for the color change mode.
bool waitForButtonState(struct aqualinkdata *aq_data, aqkey* button, aqledstate state, int numMessageReceived)
{
//LOG(ALLB_LOG, LOG_DEBUG, "waitForMessage %s %d %d\n",message,numMessageReceived,cmd);
int i=0;
pthread_mutex_lock(&aq_data->active_thread.thread_mutex);
while( ++i <= numMessageReceived)
{
LOG(ALLB_LOG, LOG_DEBUG, "loop %d of %d looking for state change to '%d' for '%s' \n",i,numMessageReceived,button->led->state,button->name);
if (button->led->state == state) {
LOG(ALLB_LOG, LOG_INFO, "Button State =%d for %s\n",state,button->name);
break;
}
//LOG(ALLB_LOG, LOG_DEBUG, "looking for '%s' received message '%s'\n",message,aq_data->last_message);
pthread_cond_wait(&aq_data->active_thread.thread_cond, &aq_data->active_thread.thread_mutex);
//LOG(ALLB_LOG, LOG_DEBUG, "loop %d of %d looking for '%s' received message '%s'\n",i,numMessageReceived,message,aq_data->last_message);
}
pthread_mutex_unlock(&aq_data->active_thread.thread_mutex);
if (numMessageReceived >= i) {
//LOG(ALLB_LOG, LOG_ERR, "Could not select MENU of Aqualink control panel\n");
LOG(ALLB_LOG, LOG_DEBUG, "did not find state '%d' for '%s'\n",button->led->state,button->name);
return false;
}
LOG(ALLB_LOG, LOG_DEBUG, "found state '%d' for '%s'\n",button->led->state,button->name);
return true;
}