issue: #36858
- Start channel manager on datacoord, but with empty assign policy in
streaming service.
- Make collection at dropping state can be recovered by flusher to make
sure that
milvus consume the dropCollection message.
- Add backoff for flusher lifetime.
- remove the proxy watcher from timetick at rootcoord in streaming
service.
Also see the better fixup: #37176
---------
Signed-off-by: chyezh <chyezh@outlook.com>
Also remove conflit check when executing L0. The exclusive is already
guarenteed in scheduler
See also: #37140
---------
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
Timeout is a bad design for long running tasks, especially using a
static timeout config. We should monitor execution progress and fail the
task if the progress has been stale for a long time.
This pr is a small patch to stop DC from marking compaction tasks
timeout, while still waiting for DN to finish. The design is
self-conflicted. After this pr, mix and L0 compaction are no longer
controlled by DC timeout, but clustering is still under timeout control.
The compaction queue capacity grows larger for priority calc, hence
timeout compactions appears more often, and when timeout, the queuing
tasks will be timeout too, no compaction will success after.
See also: #37108, #37015
---------
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
See #36550
This PR made 2 changes:
1. Introducing a prioritization mechanism, if
`dataCoord.compaction.taskPrioritizer` is set to `level`, compaction
tasks are always executed as the priority of L0>Mix>Clustering
2. `dataCoord.compaction.maxParallelTaskNum` now controls the
parallelism of executing tasks, not the task number of queue +
executing.
---------
Signed-off-by: Ted Xu <ted.xu@zilliz.com>
issue: #33744
This PR includes the following changes:
1. Added a new task type to the task scheduler in datacoord: stats task,
which sorts segments by primary key.
2. Implemented segment sorting in indexnode.
3. Added a new field `FieldStatsLog` to SegmentInfo to store token index
information.
---------
Signed-off-by: Cai Zhang <cai.zhang@zilliz.com>
Related to #28861
Move session manager, worker manager to session package. Also renaming
each manager to corresponding node name(datanode, indexnode).
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Related to #28861
Move allocator interface and implementation into separate package. Also
update some unittest logic.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
1.fix compaction task not be cleaned correctly
2.add a new parameter to control compaction gc loop interval
3.remove some useless configs of clustering compaction
bug: #34764
Signed-off-by: wayblink <anyang.wang@zilliz.com>
This PR removes the dependency of compaction on the ID allocator by
pre-allocating the logID and segmentID.
issue: https://github.com/milvus-io/milvus/issues/33957
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
Query slot of compaction in datanode, and transfer the control logic for
limiting compaction tasks from datacoord to the datanode.
issue: https://github.com/milvus-io/milvus/issues/32809
---------
Signed-off-by: bigsheeper <yihao.dai@zilliz.com>
See also #33062
This PR:
- Add `lock.RWMutex` & `lock.Mutex` alias to switch implementation based
on build flags
- When build flags has `test` in it, use `go-deadlock` to detect
possible deadlocks
- Replace all `sync.RWMutex` & `sync.Mutex` in datacoord pkg
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #32165
This PR modify the `SelectSegments` interface to utilizing collection id
information when selecting segment with provided collection
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
didn't mark the compact as failure if it's simply an rpc error when
GetCompactionPlansResults
see #31352
Signed-off-by: xiaofanluan <xiaofan.luan@zilliz.com>
Trigger l0 compaction when l0 views don't change
So that leftover l0 segments would be compacted in the end.
1. Refresh LevelZero plans in comactionPlanHandler, remove the meta
dependency
of compaction trigger v2
2. Add ForceTrigger method for CompactionView interface
3. rename mu to taskGuard
4. Add a new TriggerTypeLevelZeroViewIDLE
5. Add an idleTicker for compaction view manager
See also: #30098, #30556
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
---------
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
If DC restarted, those unkonwn compaction tasks
will never get call back in DN, so that the segments in the compaction
task will be locked, unable to sync and compaction again, blocking cp
advance and compaction executing.
See also: #30137
---------
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
Refine compaction interfaces in datacoord, support compaction result
with more than one segment. Prepare for major compaction.
related: #30633
Signed-off-by: wayblink <anyang.wang@zilliz.com>
syncMgr.Block() will lock the segment when executing compaction.
Previous implementation was unable to Unblock thoese segments when
compaction failed. If next compaction of the same segments arrives,
it'll stuck forever and block all later compation tasks.
This PR makes sure compaction executor would Unblock these segments
after a failure compaction.
Apart form that, this PR also refines some logs and clean some codes of
compaction, compactor:
1. Log segment count instead of segmentIDs to avoid logging too many
segments
2. Flush RPC returns L1 segments only, skip L0 and L2
3. CompactionType is checked in `Compaction`, no need to check again
inside compactor
4. Use ligter method to replace `getSegmentMeta`
5. Log information for L0 compaction when encounters an error
See also: #30213
---------
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
See also #30167
After support open telemetry tracing, we want to have traceID as well,
this PR adds util functions to set traceID with span & propagate traceID
between different context.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
After #28873, PartitionID and CollectionID should be filled in
CompactionSegmentBinlog so that DataNode can compose
the correct logPath. However There're some places left forgotten to fill
in the information, causing Datanode downloading `xxx/0/0/xxxx/xxxx`
binlogs during compaction
See also: #30213
Signed-off-by: yangxuan <xuan.yang@zilliz.com>
Resolves#30167
This PR add tracing for all compaction from the task start in datacoord
and execution procedures in datanode.
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
don't store logPath in meta to reduce memory, when service get
segmentinfo, generate logpath from logid.
#28885
Signed-off-by: lixinguo <xinguo.li@zilliz.com>
Co-authored-by: lixinguo <xinguo.li@zilliz.com>
Zhen Ye
XuanYang-cn
wayblink
Ted Xu
yihao.dai
cai.zhang
congqixia
CharlesFeng
zhenshan.cao
aoiasd
Xiaofan
smellthemoon