issue: #36970
cause release segment and balance channel may happen at same time, and
before new delegator become serviceable, if release segment exeuctes on
new delegator, and search/query comes on old delegator, then release
segment and query segment happens in parallel, if release segment
execute first in worker, then search/query will got a SegmentNodeLoaded
error.
This PR add serviceable filter on delegator, then all load/release
segment operation will happens on serviceable delegator.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #33550
cause wrong impl of UpdateCollectionNextTarget, if ReleaseCollection and
UpdateCollectionNextTarget happens at same time, the the released
partition's segment list may be add to target again, and delegator will
be marked as unserviceable due to lack of segment.
This PR fix the impl of UpdateCollectionNextTarget
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #35821
After collection loaded, if we need to increase/decrease collection's
replica, we need to release and load it again.
milvus offers 4 solution to update loaded collection's replica, this PR
aims to dynamic change the replica number without release, and after
replica number changed, milvus will execute load replica or release
replica in async, and the replica loaded status can be checked by
getReplicas API.
Notice that if set too much replicas than querynode can afford，the new
replica won't be loaded successfully until enough querynode joins.
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #35846
querycoord will notify proxy to update shard leader cache after
delegator location changes, but during querynode's failure recovery,
some delegator may become unserviceable due to lacking of segments, and
back to serviceable after segment loaded, so we also need to notify
proxy to invalidate shard leader cache when delegator serviceable state
changes.
This PR will maintain querynode's serviceable state during heartbeat,
and notify proxy to invalidate shard leader cache if serviceable state
changes.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #35170
This PR enable to set load configs in cluster level, such as replicas
and resource groups. then when load collections will use the load
config.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
before querycoord stop gracefully, we will save the current target to
meta store and recover it after querycoord start up, to speed the
querycoord's recovery time. but the target version hasn't been recovered
as expected, and it use latest timestamp as current target's version,
which has no effect to querycoord but an unnecessary syncTargetVersion
func call.
This PR recover the correct target version to avoid unnecessary
syncTargetVersion func call
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #35087
after qc restarts, and target is not ready yet, if dist_handler try to
update segment dist, it will set legacy level to l0 segment, which may
cause l0 segment be moved to other node, cause search/query failed.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #34715
if collection's segment list doesn't changes anymore, then the next
target will be empty at most time, and balance segment will check
whether segment exist in both current and next target, so the balance
cloud be blocked due to next target is empty.
This PR permit segment to be moved if next target is empty, to avoid
balance stuck.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
See also #34234
`LoadPartitions` does not guarantee the current target has loading
partitions if there are some partitions already loaded before.
This PR check current target contains the partition to load when
advancing loading percentage to 100.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
when querycoord process segment task, it will try to iterate whole
segment list to checke whether segment is loaded, which cost too much
cpu if there has thousands of segments.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #30040
This PR introduce two database level props:
1. database.replica.number
2. database.resource_groups
User can set those two database props by AlterDatabase API, then can
load collection without specified replica_num and resource groups. then
it will use database level load param when try to load collections.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #33103
when try to do stopping balance for stopping query node, balancer will
try to get node list from replica.GetNodes, then check whether node is
stopping, if so, stopping balance will be triggered for this replica.
after the replica refactor, replica.GetNodes only return rwNodes, and
the stopping node maintains in roNodes, so balancer couldn't find
replica which contains stopping node, and stopping balance for replica
won't be triggered, then query node will stuck forever due to
segment/channel doesn't move out.
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #33005
1. add `MemorySize` field for insert binlog.
2. `LogSize` means the file size in the storage object.
3. `MemorySize` means the size of the data in the memory.
---------
Signed-off-by: Cai Zhang <cai.zhang@zilliz.com>
Signed-off-by: cai.zhang <cai.zhang@zilliz.com>
issue: #32910
see also: #32911
when channel exclusive mode is enabled, replica will record channel node
info in meta store, and if the balance policy changes, which means
channel exclusive mode is disabled, we should clean up the channel node
info in meta store, and stop to balance node between channels.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #32910
* split replica's node list to channels when create replicas
* balance nodes among channels when node change happens
* implement channel level balance, let balance happens in channel level
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
issue: #32901
Cause release segment request need be send to delegator, but it need
replica to info find segment's delegator. but the stopping query node
will be marked as read only in replica, then `replica.Contains()` just
return true for rwNode in replica. then it can't get replica info by
stopping query node and release segment will be blocked.
This PR make `replica.Contains()` return true for both roNode and
rwNode.
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
See also #32165
In old `GetResourceGroupByCollection` implementation, it iterates all
replicas to match collection id, which is slow and CPU time consuming.
This PR make it utilize the coll2Replicas mapping by calling
`GetByCollection` and mapping replicas into resource group.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #32466
this PR enhance that when shard location changed, update proxy's shard
leader cache. in case of query node failover case, proxy can find
replica recover
---------
Signed-off-by: Wei Liu <wei.liu@zilliz.com>
related to #32165
1. for all the manager, support collection level index
2. remove collection level filter to avoid extra cpu usage when
collection number increases
Signed-off-by: xiaofanluan <xiaofan.luan@zilliz.com>
issue: #30647
- Remove error report if there's no query node serve. It's hard for
programer to use it to do resource management.
- Change resource group `transferNode` logic to keep compatible with old
version sdk.
---------
Signed-off-by: chyezh <chyezh@outlook.com>
See also #32165
Add segment dist and leader view filter criterion struct to store
frequent filter conditions.
Add collection/channel filter results for these two meta
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #32165
Change `SegmentDistFilter` to interface in order to provde node index
when filter segment dist.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #32165
Change `LeaderViewFilter` to interface to provided map key to avoid
iterating all key-values in LeaderViewManager
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
See also #31632
Release conc.Pool after usage to clean worker and stop background purge
and ticktock.
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #30647
- Same dst and src resource group should not be allowed in
`TransferReplica` and `TransferNode`.
- Remove redundant parameter check.
Signed-off-by: chyezh <chyezh@outlook.com>
Related to https://github.com/milvus-io/milvus/issues/32165
Avoid iterating through all replicas/collections if possible. Iteration
is expensive when there are large number of replicas/collections.
Signed-off-by: yiwangdr <yiwangdr@gmail.com>
Related to #32165
Add collection to partitionIDs mapping to avoid interation on all
partitions loaded when trying to get all partitions with collection id
---------
Signed-off-by: Congqi Xia <congqi.xia@zilliz.com>
issue: #30647
- Add declarative resource group api
- Add config for resource group management
- Resource group recovery enhancement
---------
Signed-off-by: chyezh <chyezh@outlook.com>
wei liu
Bingyi Sun
sthuang
congqixia
Xiaofan
SimFG
Chun Han
jaime
wayblink
cai.zhang
chyezh
yihao.dai
yiwangdr