mirror of https://github.com/milvus-io/milvus.git
[skip e2e] Bump milvus gpu version to 2.3.0 (#26631)
Signed-off-by: Bennu-Li <yunmei.li@zilliz.com>pull/26645/head
Bennu
GitHub
parent
f31c6786ab
commit
905d4b389a
|
|
@ -33,7 +33,7 @@ dependencies_network= host
|
||||||
nodes_network= host
|
nodes_network= host
|
||||||
|
|
||||||
; Setup varibale to controll what image version of Milvus to use.
|
; Setup varibale to controll what image version of Milvus to use.
|
||||||
image= milvusdb/milvus:v2.1.0
|
image= milvusdb/milvus:v2.3.0
|
||||||
|
|
||||||
; Setup static IP addresses of the docker hosts as variable for container environment variable config.
|
; Setup static IP addresses of the docker hosts as variable for container environment variable config.
|
||||||
; Before running the playbook, below 4 IP addresses need to be replaced with the IP of your host VM
|
; Before running the playbook, below 4 IP addresses need to be replaced with the IP of your host VM
|
||||||
|
|
|
||||||
|
|
@ -1,262 +0,0 @@
|
||||||
version: '3.5'
|
|
||||||
|
|
||||||
services:
|
|
||||||
etcd:
|
|
||||||
container_name: milvus-etcd
|
|
||||||
image: quay.io/coreos/etcd:v3.5.5
|
|
||||||
environment:
|
|
||||||
- ETCD_AUTO_COMPACTION_MODE=revision
|
|
||||||
- ETCD_AUTO_COMPACTION_RETENTION=1000
|
|
||||||
- ETCD_QUOTA_BACKEND_BYTES=4294967296
|
|
||||||
- ETCD_SNAPSHOT_COUNT=50000
|
|
||||||
volumes:
|
|
||||||
- ${DOCKER_VOLUME_DIRECTORY:-.}/volumes/etcd:/etcd
|
|
||||||
command: etcd -advertise-client-urls=http://127.0.0.1:2379 -listen-client-urls http://0.0.0.0:2379 --data-dir /etcd
|
|
||||||
|
|
||||||
pulsar:
|
|
||||||
container_name: milvus-pulsar
|
|
||||||
image: milvusdb/pulsar:v2.8.2-m1
|
|
||||||
volumes:
|
|
||||||
- ${DOCKER_VOLUME_DIRECTORY:-.}/volumes/pulsar:/pulsar/data
|
|
||||||
environment:
|
|
||||||
# bin/apply-config-from-env.py script will modify the configuration file based on the environment variables
|
|
||||||
# nettyMaxFrameSizeBytes must be calculated from maxMessageSize + 10240 (padding)
|
|
||||||
- nettyMaxFrameSizeBytes=104867840 # this is 104857600 + 10240 (padding)
|
|
||||||
- defaultRetentionTimeInMinutes=10080
|
|
||||||
- defaultRetentionSizeInMB=8192
|
|
||||||
# maxMessageSize is missing from standalone.conf, must use PULSAR_PREFIX_ to get it configured
|
|
||||||
- PULSAR_PREFIX_maxMessageSize=104857600
|
|
||||||
- PULSAR_GC=-XX:+UseG1GC
|
|
||||||
|
|
||||||
minio:
|
|
||||||
container_name: milvus-minio
|
|
||||||
image: minio/minio:RELEASE.2022-03-17T06-34-49Z
|
|
||||||
ports:
|
|
||||||
- "9000:9000"
|
|
||||||
- "9001:9001"
|
|
||||||
environment:
|
|
||||||
MINIO_ACCESS_KEY: minioadmin
|
|
||||||
MINIO_SECRET_KEY: minioadmin
|
|
||||||
volumes:
|
|
||||||
- ${DOCKER_VOLUME_DIRECTORY:-.}/volumes/minio:/minio_data
|
|
||||||
command: minio server /minio_data --console-address ":9001"
|
|
||||||
healthcheck:
|
|
||||||
test: ["CMD", "curl", "-f", "http://localhost:9000/minio/health/live"]
|
|
||||||
interval: 30s
|
|
||||||
timeout: 20s
|
|
||||||
retries: 3
|
|
||||||
|
|
||||||
rootcoord:
|
|
||||||
container_name: milvus-rootcoord
|
|
||||||
image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
command: ["milvus", "run", "rootcoord"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
ROOT_COORD_ADDRESS: rootcoord:53100
|
|
||||||
# add ROOT_COORD_ENABLE_ACTIVE_STANDBY to enable active standby
|
|
||||||
ROOT_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
depends_on:
|
|
||||||
- "etcd"
|
|
||||||
- "pulsar"
|
|
||||||
- "minio"
|
|
||||||
|
|
||||||
# enable active standby with rootcoord with multiple containers
|
|
||||||
#rootcoord-1:
|
|
||||||
# container_name: milvus-rootcoord-1
|
|
||||||
# image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
# command: ["milvus", "run", "rootcoord"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# ROOT_COORD_ADDRESS: rootcoord-1:53100
|
|
||||||
# # add ROOT_COORD_ENABLE_ACTIVE_STANDBY to enable active standby
|
|
||||||
# ROOT_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
# depends_on:
|
|
||||||
# - "etcd"
|
|
||||||
# - "pulsar"
|
|
||||||
# - "minio"
|
|
||||||
|
|
||||||
proxy:
|
|
||||||
container_name: milvus-proxy
|
|
||||||
image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
command: ["milvus", "run", "proxy"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
ports:
|
|
||||||
- "19530:19530"
|
|
||||||
- "9091:9091"
|
|
||||||
|
|
||||||
querycoord:
|
|
||||||
container_name: milvus-querycoord
|
|
||||||
image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
command: ["milvus", "run", "querycoord"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
QUERY_COORD_ADDRESS: querycoord:19531
|
|
||||||
# add QUERY_COORD_ENABLE_ACTIVE_STANDBY to enable active standby
|
|
||||||
QUERY_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
depends_on:
|
|
||||||
- "etcd"
|
|
||||||
- "pulsar"
|
|
||||||
- "minio"
|
|
||||||
|
|
||||||
# enable active standby with querycoord with multiple containers
|
|
||||||
#querycoord-1:
|
|
||||||
# container_name: milvus-querycoord-1
|
|
||||||
# image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
# command: ["milvus", "run", "querycoord"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# QUERY_COORD_ADDRESS: querycoord-1:19531
|
|
||||||
# QUERY_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
# depends_on:
|
|
||||||
# - "etcd"
|
|
||||||
# - "pulsar"
|
|
||||||
# - "minio"
|
|
||||||
|
|
||||||
querynode:
|
|
||||||
container_name: milvus-querynode
|
|
||||||
image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
command: ["milvus", "run", "querynode"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
depends_on:
|
|
||||||
- "querycoord"
|
|
||||||
|
|
||||||
indexcoord:
|
|
||||||
container_name: milvus-indexcoord
|
|
||||||
image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
command: ["milvus", "run", "indexcoord"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
INDEX_COORD_ADDRESS: indexcoord:31000
|
|
||||||
# add INDEX_COORD_ENABLE_ACTIVE_STANDBY to enable active standby
|
|
||||||
INDEX_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
depends_on:
|
|
||||||
- "etcd"
|
|
||||||
- "pulsar"
|
|
||||||
- "minio"
|
|
||||||
|
|
||||||
# enable active standby with indexcoord with multiple containers
|
|
||||||
#indexcoord-1:
|
|
||||||
# container_name: milvus-indexcoord-1
|
|
||||||
# image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
# command: ["milvus", "run", "indexcoord"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# INDEX_COORD_ADDRESS: indexcoord-1:31000
|
|
||||||
# INDEX_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
# depends_on:
|
|
||||||
# - "etcd"
|
|
||||||
# - "pulsar"
|
|
||||||
# - "minio"
|
|
||||||
|
|
||||||
indexnode:
|
|
||||||
container_name: milvus-indexnode
|
|
||||||
image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
command: ["milvus", "run", "indexnode"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
INDEX_COORD_ADDRESS: indexcoord:31000
|
|
||||||
depends_on:
|
|
||||||
- "indexcoord"
|
|
||||||
|
|
||||||
datacoord:
|
|
||||||
container_name: milvus-datacoord
|
|
||||||
image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
command: ["milvus", "run", "datacoord"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
DATA_COORD_ADDRESS: datacoord:13333
|
|
||||||
# add DATA_COORD_ENABLE_ACTIVE_STANDBY to enable active standby
|
|
||||||
DATA_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
depends_on:
|
|
||||||
- "etcd"
|
|
||||||
- "pulsar"
|
|
||||||
- "minio"
|
|
||||||
|
|
||||||
# enable active standby with indexcoord with multiple containers
|
|
||||||
#datacoord-1:
|
|
||||||
# container_name: milvus-datacoord-1
|
|
||||||
# image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
# command: ["milvus", "run", "datacoord"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# DATA_COORD_ADDRESS: datacoord-1:13333
|
|
||||||
# DATA_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
# depends_on:
|
|
||||||
# - "etcd"
|
|
||||||
# - "pulsar"
|
|
||||||
# - "minio"
|
|
||||||
|
|
||||||
datanode:
|
|
||||||
container_name: milvus-datanode
|
|
||||||
image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
command: ["milvus", "run", "datanode"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
depends_on:
|
|
||||||
- "datacoord"
|
|
||||||
|
|
||||||
# ----------------------------------------------------------------------------------------
|
|
||||||
# If you need multiple instances of a service, say DataNode, use the following script:
|
|
||||||
# ----------------------------------------------------------------------------------------
|
|
||||||
# datanode-1:
|
|
||||||
# container_name: milvus-datanode-1
|
|
||||||
# image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
# command: ["milvus", "run", "datanode"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# depends_on:
|
|
||||||
# - "datacoord"
|
|
||||||
#
|
|
||||||
# datanode-2:
|
|
||||||
# container_name: milvus-datanode-2
|
|
||||||
# image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
# command: ["milvus", "run", "datanode"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# depends_on:
|
|
||||||
# - "datacoord"
|
|
||||||
#
|
|
||||||
# datanode-3:
|
|
||||||
# container_name: milvus-datanode-3
|
|
||||||
# image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
# command: ["milvus", "run", "datanode"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# depends_on:
|
|
||||||
# - "datacoord"
|
|
||||||
|
|
||||||
networks:
|
|
||||||
default:
|
|
||||||
name: milvus
|
|
||||||
|
|
@ -1,267 +0,0 @@
|
||||||
version: '3.5'
|
|
||||||
|
|
||||||
services:
|
|
||||||
etcd:
|
|
||||||
container_name: milvus-etcd
|
|
||||||
image: quay.io/coreos/etcd:v3.5.5
|
|
||||||
environment:
|
|
||||||
- ETCD_AUTO_COMPACTION_MODE=revision
|
|
||||||
- ETCD_AUTO_COMPACTION_RETENTION=1000
|
|
||||||
- ETCD_QUOTA_BACKEND_BYTES=4294967296
|
|
||||||
- ETCD_SNAPSHOT_COUNT=50000
|
|
||||||
volumes:
|
|
||||||
- ${DOCKER_VOLUME_DIRECTORY:-.}/volumes/etcd:/etcd
|
|
||||||
command: etcd -advertise-client-urls=http://127.0.0.1:2379 -listen-client-urls http://0.0.0.0:2379 --data-dir /etcd
|
|
||||||
|
|
||||||
pulsar:
|
|
||||||
container_name: milvus-pulsar
|
|
||||||
image: apachepulsar/pulsar:2.8.2
|
|
||||||
volumes:
|
|
||||||
- ${DOCKER_VOLUME_DIRECTORY:-.}/volumes/pulsar:/pulsar/data
|
|
||||||
environment:
|
|
||||||
# bin/apply-config-from-env.py script will modify the configuration file based on the environment variables
|
|
||||||
# nettyMaxFrameSizeBytes must be calculated from maxMessageSize + 10240 (padding)
|
|
||||||
- nettyMaxFrameSizeBytes=104867840 # this is 104857600 + 10240 (padding)
|
|
||||||
- defaultRetentionTimeInMinutes=10080
|
|
||||||
- defaultRetentionSizeInMB=8192
|
|
||||||
# maxMessageSize is missing from standalone.conf, must use PULSAR_PREFIX_ to get it configured
|
|
||||||
- PULSAR_PREFIX_maxMessageSize=104857600
|
|
||||||
- PULSAR_GC=-XX:+UseG1GC
|
|
||||||
command: |
|
|
||||||
/bin/bash -c \
|
|
||||||
"bin/apply-config-from-env.py conf/standalone.conf && \
|
|
||||||
exec bin/pulsar standalone --no-functions-worker --no-stream-storage"
|
|
||||||
|
|
||||||
minio:
|
|
||||||
container_name: milvus-minio
|
|
||||||
image: minio/minio:RELEASE.2022-03-17T06-34-49Z
|
|
||||||
environment:
|
|
||||||
MINIO_ACCESS_KEY: minioadmin
|
|
||||||
MINIO_SECRET_KEY: minioadmin
|
|
||||||
ports:
|
|
||||||
- "9000:9000"
|
|
||||||
- "9001:9001"
|
|
||||||
volumes:
|
|
||||||
- ${DOCKER_VOLUME_DIRECTORY:-.}/volumes/minio:/minio_data
|
|
||||||
command: minio server /minio_data --console-address ":9001"
|
|
||||||
healthcheck:
|
|
||||||
test: ["CMD", "curl", "-f", "http://localhost:9000/minio/health/live"]
|
|
||||||
interval: 30s
|
|
||||||
timeout: 20s
|
|
||||||
retries: 3
|
|
||||||
|
|
||||||
rootcoord:
|
|
||||||
container_name: milvus-rootcoord
|
|
||||||
image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
command: ["milvus", "run", "rootcoord"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
ROOT_COORD_ADDRESS: rootcoord:53100
|
|
||||||
# add ROOT_COORD_ENABLE_ACTIVE_STANDBY to enable active standby
|
|
||||||
ROOT_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
depends_on:
|
|
||||||
- "etcd"
|
|
||||||
- "pulsar"
|
|
||||||
- "minio"
|
|
||||||
|
|
||||||
# enable active standby with rootcoord with multiple containers
|
|
||||||
#rootcoord-1:
|
|
||||||
# container_name: milvus-rootcoord-1
|
|
||||||
# image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
# command: ["milvus", "run", "rootcoord"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# ROOT_COORD_ADDRESS: rootcoord-1:53100
|
|
||||||
# # add ROOT_COORD_ENABLE_ACTIVE_STANDBY to enable active standby
|
|
||||||
# ROOT_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
# depends_on:
|
|
||||||
# - "etcd"
|
|
||||||
# - "pulsar"
|
|
||||||
# - "minio"
|
|
||||||
|
|
||||||
proxy:
|
|
||||||
container_name: milvus-proxy
|
|
||||||
image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
command: ["milvus", "run", "proxy"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
ports:
|
|
||||||
- "19530:19530"
|
|
||||||
- "9091:9091"
|
|
||||||
|
|
||||||
querycoord:
|
|
||||||
container_name: milvus-querycoord
|
|
||||||
image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
command: ["milvus", "run", "querycoord"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
QUERY_COORD_ADDRESS: querycoord:19531
|
|
||||||
# add QUERY_COORD_ENABLE_ACTIVE_STANDBY to enable active standby
|
|
||||||
QUERY_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
depends_on:
|
|
||||||
- "etcd"
|
|
||||||
- "pulsar"
|
|
||||||
- "minio"
|
|
||||||
|
|
||||||
# enable active standby with querycoord with multiple containers
|
|
||||||
#querycoord-1:
|
|
||||||
# container_name: milvus-querycoord-1
|
|
||||||
# image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
# command: ["milvus", "run", "querycoord"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# QUERY_COORD_ADDRESS: querycoord-1:19531
|
|
||||||
# QUERY_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
# depends_on:
|
|
||||||
# - "etcd"
|
|
||||||
# - "pulsar"
|
|
||||||
# - "minio"
|
|
||||||
|
|
||||||
querynode:
|
|
||||||
container_name: milvus-querynode
|
|
||||||
image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
command: ["milvus", "run", "querynode"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
depends_on:
|
|
||||||
- "querycoord"
|
|
||||||
|
|
||||||
indexcoord:
|
|
||||||
container_name: milvus-indexcoord
|
|
||||||
image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
command: ["milvus", "run", "indexcoord"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
INDEX_COORD_ADDRESS: indexcoord:31000
|
|
||||||
# add INDEX_COORD_ENABLE_ACTIVE_STANDBY to enable active standby
|
|
||||||
INDEX_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
depends_on:
|
|
||||||
- "etcd"
|
|
||||||
- "pulsar"
|
|
||||||
- "minio"
|
|
||||||
|
|
||||||
# enable active standby with indexcoord with multiple containers
|
|
||||||
#indexcoord-1:
|
|
||||||
# container_name: milvus-indexcoord-1
|
|
||||||
# image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
# command: ["milvus", "run", "indexcoord"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# INDEX_COORD_ADDRESS: indexcoord-1:31000
|
|
||||||
# INDEX_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
# depends_on:
|
|
||||||
# - "etcd"
|
|
||||||
# - "pulsar"
|
|
||||||
# - "minio"
|
|
||||||
|
|
||||||
indexnode:
|
|
||||||
container_name: milvus-indexnode
|
|
||||||
image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
command: ["milvus", "run", "indexnode"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
INDEX_COORD_ADDRESS: indexcoord:31000
|
|
||||||
depends_on:
|
|
||||||
- "indexcoord"
|
|
||||||
|
|
||||||
datacoord:
|
|
||||||
container_name: milvus-datacoord
|
|
||||||
image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
command: ["milvus", "run", "datacoord"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
DATA_COORD_ADDRESS: datacoord:13333
|
|
||||||
# add DATA_COORD_ENABLE_ACTIVE_STANDBY to enable active standby
|
|
||||||
DATA_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
depends_on:
|
|
||||||
- "etcd"
|
|
||||||
- "pulsar"
|
|
||||||
- "minio"
|
|
||||||
|
|
||||||
# enable active standby with indexcoord with multiple containers
|
|
||||||
#datacoord-1:
|
|
||||||
# container_name: milvus-datacoord-1
|
|
||||||
# image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
# command: ["milvus", "run", "datacoord"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# DATA_COORD_ADDRESS: datacoord-1:13333
|
|
||||||
# DATA_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
# depends_on:
|
|
||||||
# - "etcd"
|
|
||||||
# - "pulsar"
|
|
||||||
# - "minio"
|
|
||||||
|
|
||||||
datanode:
|
|
||||||
container_name: milvus-datanode
|
|
||||||
image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
command: ["milvus", "run", "datanode"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
depends_on:
|
|
||||||
- "datacoord"
|
|
||||||
|
|
||||||
# ----------------------------------------------------------------------------------------
|
|
||||||
# If you need multiple instances of a service, say DataNode, use the following script:
|
|
||||||
# ----------------------------------------------------------------------------------------
|
|
||||||
# datanode-1:
|
|
||||||
# container_name: milvus-datanode-1
|
|
||||||
# image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
# command: ["milvus", "run", "datanode"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# depends_on:
|
|
||||||
# - "datacoord"
|
|
||||||
#
|
|
||||||
# datanode-2:
|
|
||||||
# container_name: milvus-datanode-2
|
|
||||||
# image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
# command: ["milvus", "run", "datanode"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# depends_on:
|
|
||||||
# - "datacoord"
|
|
||||||
#
|
|
||||||
# datanode-3:
|
|
||||||
# container_name: milvus-datanode-3
|
|
||||||
# image: milvusdb/milvus:v2.3.0-beta
|
|
||||||
# command: ["milvus", "run", "datanode"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# depends_on:
|
|
||||||
# - "datacoord"
|
|
||||||
|
|
||||||
|
|
||||||
networks:
|
|
||||||
default:
|
|
||||||
name: milvus
|
|
||||||
|
|
@ -1,372 +0,0 @@
|
||||||
version: '3.5'
|
|
||||||
|
|
||||||
services:
|
|
||||||
etcd:
|
|
||||||
container_name: milvus-etcd
|
|
||||||
image: quay.io/coreos/etcd:v3.5.5
|
|
||||||
environment:
|
|
||||||
- ETCD_AUTO_COMPACTION_MODE=revision
|
|
||||||
- ETCD_AUTO_COMPACTION_RETENTION=1000
|
|
||||||
- ETCD_QUOTA_BACKEND_BYTES=4294967296
|
|
||||||
- ETCD_SNAPSHOT_COUNT=50000
|
|
||||||
volumes:
|
|
||||||
- ${DOCKER_VOLUME_DIRECTORY:-.}/volumes/etcd:/etcd
|
|
||||||
command: etcd -advertise-client-urls=http://127.0.0.1:2379 -listen-client-urls http://0.0.0.0:2379 --data-dir /etcd
|
|
||||||
|
|
||||||
pulsar:
|
|
||||||
container_name: milvus-pulsar
|
|
||||||
image: apachepulsar/pulsar:2.8.2
|
|
||||||
volumes:
|
|
||||||
- ${DOCKER_VOLUME_DIRECTORY:-.}/volumes/pulsar:/pulsar/data
|
|
||||||
environment:
|
|
||||||
# bin/apply-config-from-env.py script will modify the configuration file based on the environment variables
|
|
||||||
# nettyMaxFrameSizeBytes must be calculated from maxMessageSize + 10240 (padding)
|
|
||||||
- nettyMaxFrameSizeBytes=104867840 # this is 104857600 + 10240 (padding)
|
|
||||||
- defaultRetentionTimeInMinutes=10080
|
|
||||||
- defaultRetentionSizeInMB=8192
|
|
||||||
# maxMessageSize is missing from standalone.conf, must use PULSAR_PREFIX_ to get it configured
|
|
||||||
- PULSAR_PREFIX_maxMessageSize=104857600
|
|
||||||
- PULSAR_GC=-XX:+UseG1GC
|
|
||||||
command: |
|
|
||||||
/bin/bash -c \
|
|
||||||
"bin/apply-config-from-env.py conf/standalone.conf && \
|
|
||||||
exec bin/pulsar standalone --no-functions-worker --no-stream-storage"
|
|
||||||
|
|
||||||
minio:
|
|
||||||
container_name: milvus-minio
|
|
||||||
image: minio/minio:RELEASE.2022-03-17T06-34-49Z
|
|
||||||
environment:
|
|
||||||
MINIO_ACCESS_KEY: minioadmin
|
|
||||||
MINIO_SECRET_KEY: minioadmin
|
|
||||||
ports:
|
|
||||||
- "9000:9000"
|
|
||||||
- "9001:9001"
|
|
||||||
volumes:
|
|
||||||
- ${DOCKER_VOLUME_DIRECTORY:-.}/volumes/minio:/minio_data
|
|
||||||
command: minio server /minio_data --console-address ":9001"
|
|
||||||
healthcheck:
|
|
||||||
test: ["CMD", "curl", "-f", "http://localhost:9000/minio/health/live"]
|
|
||||||
interval: 30s
|
|
||||||
timeout: 20s
|
|
||||||
retries: 3
|
|
||||||
|
|
||||||
rootcoord:
|
|
||||||
container_name: milvus-rootcoord
|
|
||||||
image: milvusdb/milvus:v2.3.0-gpu-beta
|
|
||||||
command: ["milvus", "run", "rootcoord"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
ROOT_COORD_ADDRESS: rootcoord:53100
|
|
||||||
# add ROOT_COORD_ENABLE_ACTIVE_STANDBY to enable active standby
|
|
||||||
ROOT_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
deploy:
|
|
||||||
resources:
|
|
||||||
reservations:
|
|
||||||
devices:
|
|
||||||
- capabilities: ["gpu"]
|
|
||||||
device_ids: ["0"]
|
|
||||||
driver: nvidia
|
|
||||||
depends_on:
|
|
||||||
- "etcd"
|
|
||||||
- "pulsar"
|
|
||||||
- "minio"
|
|
||||||
|
|
||||||
# enable active standby with rootcoord with multiple containers
|
|
||||||
# rootcoord-1:
|
|
||||||
# container_name: milvus-rootcoord-1
|
|
||||||
# image: milvusdb/milvus:v2.3.0-gpu-beta
|
|
||||||
# command: ["milvus", "run", "rootcoord"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# ROOT_COORD_ADDRESS: rootcoord-1:53100
|
|
||||||
# # add ROOT_COORD_ENABLE_ACTIVE_STANDBY to enable active standby
|
|
||||||
# ROOT_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
# deploy:
|
|
||||||
# resources:
|
|
||||||
# reservations:
|
|
||||||
# devices:
|
|
||||||
# - capabilities: ["gpu"]
|
|
||||||
# device_ids: ["0"]
|
|
||||||
# driver: nvidia
|
|
||||||
# depends_on:
|
|
||||||
# - "etcd"
|
|
||||||
# - "pulsar"
|
|
||||||
# - "minio"
|
|
||||||
|
|
||||||
proxy:
|
|
||||||
container_name: milvus-proxy
|
|
||||||
image: milvusdb/milvus:v2.3.0-gpu-beta
|
|
||||||
command: ["milvus", "run", "proxy"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
ports:
|
|
||||||
- "19530:19530"
|
|
||||||
- "9091:9091"
|
|
||||||
deploy:
|
|
||||||
resources:
|
|
||||||
reservations:
|
|
||||||
devices:
|
|
||||||
- capabilities: ["gpu"]
|
|
||||||
device_ids: ["0"]
|
|
||||||
driver: nvidia
|
|
||||||
|
|
||||||
querycoord:
|
|
||||||
container_name: milvus-querycoord
|
|
||||||
image: milvusdb/milvus:v2.3.0-gpu-beta
|
|
||||||
command: ["milvus", "run", "querycoord"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
QUERY_COORD_ADDRESS: querycoord:19531
|
|
||||||
# add QUERY_COORD_ENABLE_ACTIVE_STANDBY to enable active standby
|
|
||||||
QUERY_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
deploy:
|
|
||||||
resources:
|
|
||||||
reservations:
|
|
||||||
devices:
|
|
||||||
- capabilities: ["gpu"]
|
|
||||||
device_ids: ["0"]
|
|
||||||
driver: nvidia
|
|
||||||
depends_on:
|
|
||||||
- "etcd"
|
|
||||||
- "pulsar"
|
|
||||||
- "minio"
|
|
||||||
|
|
||||||
# enable active standby with querycoord with multiple containers
|
|
||||||
#querycoord-1:
|
|
||||||
# container_name: milvus-querycoord-1
|
|
||||||
# image: milvusdb/milvus:v2.3.0-gpu-beta
|
|
||||||
# command: ["milvus", "run", "querycoord"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# QUERY_COORD_ADDRESS: querycoord-1:19531
|
|
||||||
# QUERY_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
# deploy:
|
|
||||||
# resources:
|
|
||||||
# reservations:
|
|
||||||
# devices:
|
|
||||||
# - capabilities: ["gpu"]
|
|
||||||
# device_ids: ["0"]
|
|
||||||
# driver: nvidia
|
|
||||||
# depends_on:
|
|
||||||
# - "etcd"
|
|
||||||
# - "pulsar"
|
|
||||||
# - "minio"
|
|
||||||
|
|
||||||
querynode:
|
|
||||||
container_name: milvus-querynode
|
|
||||||
image: milvusdb/milvus:v2.3.0-gpu-beta
|
|
||||||
command: ["milvus", "run", "querynode"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
deploy:
|
|
||||||
resources:
|
|
||||||
reservations:
|
|
||||||
devices:
|
|
||||||
- capabilities: ["gpu"]
|
|
||||||
device_ids: ["0"]
|
|
||||||
driver: nvidia
|
|
||||||
depends_on:
|
|
||||||
- "querycoord"
|
|
||||||
|
|
||||||
indexcoord:
|
|
||||||
container_name: milvus-indexcoord
|
|
||||||
image: milvusdb/milvus:v2.3.0-gpu-beta
|
|
||||||
command: ["milvus", "run", "indexcoord"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
INDEX_COORD_ADDRESS: indexcoord:31000
|
|
||||||
# add INDEX_COORD_ENABLE_ACTIVE_STANDBY to enable active standby
|
|
||||||
INDEX_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
deploy:
|
|
||||||
resources:
|
|
||||||
reservations:
|
|
||||||
devices:
|
|
||||||
- capabilities: ["gpu"]
|
|
||||||
device_ids: ["0"]
|
|
||||||
driver: nvidia
|
|
||||||
depends_on:
|
|
||||||
- "etcd"
|
|
||||||
- "pulsar"
|
|
||||||
- "minio"
|
|
||||||
|
|
||||||
# enable active standby with indexcoord with multiple containers
|
|
||||||
#indexcoord-1:
|
|
||||||
# container_name: milvus-indexcoord-1
|
|
||||||
# image: milvusdb/milvus:v2.3.0-gpu-beta
|
|
||||||
# command: ["milvus", "run", "indexcoord"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# INDEX_COORD_ADDRESS: indexcoord-1:31000
|
|
||||||
# INDEX_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
# deploy:
|
|
||||||
# resources:
|
|
||||||
# reservations:
|
|
||||||
# devices:
|
|
||||||
# - capabilities: ["gpu"]
|
|
||||||
# device_ids: ["0"]
|
|
||||||
# driver: nvidia
|
|
||||||
# depends_on:
|
|
||||||
# - "etcd"
|
|
||||||
# - "pulsar"
|
|
||||||
# - "minio"
|
|
||||||
|
|
||||||
indexnode:
|
|
||||||
container_name: milvus-indexnode
|
|
||||||
image: milvusdb/milvus:v2.3.0-gpu-beta
|
|
||||||
command: ["milvus", "run", "indexnode"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
INDEX_COORD_ADDRESS: indexcoord:31000
|
|
||||||
deploy:
|
|
||||||
resources:
|
|
||||||
reservations:
|
|
||||||
devices:
|
|
||||||
- capabilities: ["gpu"]
|
|
||||||
device_ids: ["0"]
|
|
||||||
driver: nvidia
|
|
||||||
depends_on:
|
|
||||||
- "indexcoord"
|
|
||||||
|
|
||||||
datacoord:
|
|
||||||
container_name: milvus-datacoord
|
|
||||||
image: milvusdb/milvus:v2.3.0-gpu-beta
|
|
||||||
command: ["milvus", "run", "datacoord"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
DATA_COORD_ADDRESS: datacoord:13333
|
|
||||||
# add DATA_COORD_ENABLE_ACTIVE_STANDBY to enable active standby
|
|
||||||
DATA_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
deploy:
|
|
||||||
resources:
|
|
||||||
reservations:
|
|
||||||
devices:
|
|
||||||
- capabilities: ["gpu"]
|
|
||||||
device_ids: ["0"]
|
|
||||||
driver: nvidia
|
|
||||||
depends_on:
|
|
||||||
- "etcd"
|
|
||||||
- "pulsar"
|
|
||||||
- "minio"
|
|
||||||
|
|
||||||
# enable active standby with indexcoord with multiple containers
|
|
||||||
#datacoord-1:
|
|
||||||
# container_name: milvus-datacoord-1
|
|
||||||
# image: milvusdb/milvus:v2.3.0-gpu-beta
|
|
||||||
# command: ["milvus", "run", "datacoord"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# DATA_COORD_ADDRESS: datacoord-1:13333
|
|
||||||
# DATA_COORD_ENABLE_ACTIVE_STANDBY: "true"
|
|
||||||
# deploy:
|
|
||||||
# resources:
|
|
||||||
# reservations:
|
|
||||||
# devices:
|
|
||||||
# - capabilities: ["gpu"]
|
|
||||||
# device_ids: ["0"]
|
|
||||||
# driver: nvidia
|
|
||||||
# depends_on:
|
|
||||||
# - "etcd"
|
|
||||||
# - "pulsar"
|
|
||||||
# - "minio"
|
|
||||||
|
|
||||||
datanode:
|
|
||||||
container_name: milvus-datanode
|
|
||||||
image: milvusdb/milvus:v2.3.0-gpu-beta
|
|
||||||
command: ["milvus", "run", "datanode"]
|
|
||||||
environment:
|
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
|
||||||
MINIO_ADDRESS: minio:9000
|
|
||||||
PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
deploy:
|
|
||||||
resources:
|
|
||||||
reservations:
|
|
||||||
devices:
|
|
||||||
- capabilities: ["gpu"]
|
|
||||||
device_ids: ["0"]
|
|
||||||
driver: nvidia
|
|
||||||
depends_on:
|
|
||||||
- "datacoord"
|
|
||||||
|
|
||||||
# ----------------------------------------------------------------------------------------
|
|
||||||
# If you need multiple instances of a service, say DataNode, use the following script:
|
|
||||||
# ----------------------------------------------------------------------------------------
|
|
||||||
# datanode-1:
|
|
||||||
# container_name: milvus-datanode-1
|
|
||||||
# image: milvusdb/milvus:v2.3.0-gpu-beta
|
|
||||||
# command: ["milvus", "run", "datanode"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# deploy:
|
|
||||||
# resources:
|
|
||||||
# reservations:
|
|
||||||
# devices:
|
|
||||||
# - capabilities: ["gpu"]
|
|
||||||
# device_ids: ["0"]
|
|
||||||
# driver: nvidia
|
|
||||||
# depends_on:
|
|
||||||
# - "datacoord"
|
|
||||||
|
|
||||||
# datanode-2:
|
|
||||||
# container_name: milvus-datanode-2
|
|
||||||
# image: milvusdb/milvus:v2.3.0-gpu-beta
|
|
||||||
# command: ["milvus", "run", "datanode"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# deploy:
|
|
||||||
# resources:
|
|
||||||
# reservations:
|
|
||||||
# devices:
|
|
||||||
# - capabilities: ["gpu"]
|
|
||||||
# device_ids: ["0"]
|
|
||||||
# driver: nvidia
|
|
||||||
# depends_on:
|
|
||||||
# - "datacoord"
|
|
||||||
|
|
||||||
# datanode-3:
|
|
||||||
# container_name: milvus-datanode-3
|
|
||||||
# image: milvusdb/milvus:v2.3.0-gpu-beta
|
|
||||||
# command: ["milvus", "run", "datanode"]
|
|
||||||
# environment:
|
|
||||||
# ETCD_ENDPOINTS: etcd:2379
|
|
||||||
# MINIO_ADDRESS: minio:9000
|
|
||||||
# PULSAR_ADDRESS: pulsar://pulsar:6650
|
|
||||||
# deploy:
|
|
||||||
# resources:
|
|
||||||
# reservations:
|
|
||||||
# devices:
|
|
||||||
# - capabilities: ["gpu"]
|
|
||||||
# device_ids: ["0"]
|
|
||||||
# driver: nvidia
|
|
||||||
# depends_on:
|
|
||||||
# - "datacoord"
|
|
||||||
|
|
||||||
|
|
||||||
networks:
|
|
||||||
default:
|
|
||||||
name: milvus
|
|
||||||
|
|
@ -33,7 +33,7 @@ services:
|
||||||
|
|
||||||
standalone:
|
standalone:
|
||||||
container_name: milvus-standalone
|
container_name: milvus-standalone
|
||||||
image: milvusdb/milvus:v2.3.0-gpu-beta
|
image: milvusdb/milvus:v2.3.0-gpu
|
||||||
command: ["milvus", "run", "standalone"]
|
command: ["milvus", "run", "standalone"]
|
||||||
environment:
|
environment:
|
||||||
ETCD_ENDPOINTS: etcd:2379
|
ETCD_ENDPOINTS: etcd:2379
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue