--- approvers: - bgrant0607 - janetkuo title: Deployments --- {% capture overview %} A _Deployment_ controller provides declarative updates for [Pods](/docs/concepts/workloads/pods/pod/) and [ReplicaSets](/docs/concepts/workloads/controllers/replicaset/). You describe a _desired state_ in a Deployment object, and the Deployment controller changes the actual state to the desired state at a controlled rate. You can define Deployments to create new ReplicaSets, or to remove existing Deployments and adopt all their resources with new Deployments. **Note:** You should not manage ReplicaSets owned by a Deployment. All the use cases should be covered by manipulating the Deployment object. Consider opening an issue in the main Kubernetes repository if your use case is not covered below. {: .note} {% endcapture %} {% capture body %} ## Use Case The following are typical use cases for Deployments: * [Create a Deployment to rollout a ReplicaSet](#creating-a-deployment). The ReplicaSet creates Pods in the background. Check the status of the rollout to see if it succeeds or not. * [Declare the new state of the Pods](#updating-a-deployment) by updating the PodTemplateSpec of the Deployment. A new ReplicaSet is created and the Deployment manages moving the Pods from the old ReplicaSet to the new one at a controlled rate. Each new ReplicaSet updates the revision of the Deployment. * [Rollback to an earlier Deployment revision](#rolling-back-a-deployment) if the current state of the Deployment is not stable. Each rollback updates the revision of the Deployment. * [Scale up the Deployment to facilitate more load.](#scaling-a-deployment) * [Pause the Deployment](#pausing-and-resuming-a-deployment) to apply multiple fixes to its PodTemplateSpec and then resume it to start a new rollout. * [Use the status of the Deployment](#deployment-status) as an indicator that a rollout has stuck * [Clean up older ReplicaSets](#clean-up-policy) that you don't need anymore ## Creating a Deployment Here is an example Deployment. It creates a ReplicaSet to bring up three nginx Pods. {% include code.html language="yaml" file="nginx-deployment.yaml" ghlink="/docs/concepts/workloads/controllers/nginx-deployment.yaml" %} Run the example by downloading the example file and then running this command: ```shell $ kubectl create -f docs/user-guide/nginx-deployment.yaml --record deployment "nginx-deployment" created ``` Setting the kubectl flag `--record` to `true` allows you to record current command in the annotations of the resources being created or updated. It is useful for future introspection: for example, to see the commands executed in each Deployment revision. Then running `get` immediately will give: ```shell $ kubectl get deployments NAME DESIRED CURRENT UP-TO-DATE AVAILABLE AGE nginx-deployment 3 0 0 0 1s ``` This indicates that the Deployment's number of desired replicas is 3 (according to deployment's `.spec.replicas`), the number of current replicas (`.status.replicas`) is 0, the number of up-to-date replicas (`.status.updatedReplicas`) is 0, and the number of available replicas (`.status.availableReplicas`) is also 0. To see the Deployment rollout status, run: ```shell $ kubectl rollout status deployment/nginx-deployment Waiting for rollout to finish: 2 out of 3 new replicas have been updated... deployment "nginx-deployment" successfully rolled out ``` Running the `get` again a few seconds later should give: ```shell $ kubectl get deployments NAME DESIRED CURRENT UP-TO-DATE AVAILABLE AGE nginx-deployment 3 3 3 3 18s ``` This indicates that the Deployment has created all three replicas, and all replicas are up-to-date (contains the latest pod template) and available (pod status is ready for at least Deployment's `.spec.minReadySeconds`). Running `kubectl get rs` and `kubectl get pods` will show the ReplicaSet (RS) and Pods created. ```shell $ kubectl get rs NAME DESIRED CURRENT READY AGE nginx-deployment-2035384211 3 3 3 18s ``` You may notice that the name of the ReplicaSet is always `-`. ```shell $ kubectl get pods --show-labels NAME READY STATUS RESTARTS AGE LABELS nginx-deployment-2035384211-7ci7o 1/1 Running 0 18s app=nginx,pod-template-hash=2035384211 nginx-deployment-2035384211-kzszj 1/1 Running 0 18s app=nginx,pod-template-hash=2035384211 nginx-deployment-2035384211-qqcnn 1/1 Running 0 18s app=nginx,pod-template-hash=2035384211 ``` The created ReplicaSet ensures that there are three nginx Pods at all times. **Note:** You must specify an appropriate selector and pod template labels in a Deployment (in this case, `app = nginx`). That is, don't overlap with other controllers (including other Deployments, ReplicaSets, StatefulSets, etc.). Kubernetes doesn't stop you from overlapping, and if multiple controllers have overlapping selectors, those controllers may fight with each other and won't behave correctly. {: .note} ### Pod-template-hash label **Note:** Do not change this label. {: .note} Note the pod-template-hash label in the example output in the pod labels above. This label is added by the Deployment controller to every ReplicaSet that a Deployment creates or adopts. Its purpose is to make sure that child ReplicaSets of a Deployment do not overlap. It is computed by hashing the PodTemplate of the ReplicaSet and using the resulting hash as the label value that will be added in the ReplicaSet selector, pod template labels, and in any existing Pods that the ReplicaSet may have. ## Updating a Deployment **Note:** A Deployment's rollout is triggered if and only if the Deployment's pod template (that is, `.spec.template`) is changed, for example if the labels or container images of the template are updated. Other updates, such as scaling the Deployment, do not trigger a rollout. {: .note} Suppose that we now want to update the nginx Pods to use the `nginx:1.9.1` image instead of the `nginx:1.7.9` image. ```shell $ kubectl set image deployment/nginx-deployment nginx=nginx:1.9.1 deployment "nginx-deployment" image updated ``` Alternatively, we can `edit` the Deployment and change `.spec.template.spec.containers[0].image` from `nginx:1.7.9` to `nginx:1.9.1`: ```shell $ kubectl edit deployment/nginx-deployment deployment "nginx-deployment" edited ``` To see the rollout status, run: ```shell $ kubectl rollout status deployment/nginx-deployment Waiting for rollout to finish: 2 out of 3 new replicas have been updated... deployment "nginx-deployment" successfully rolled out ``` After the rollout succeeds, you may want to `get` the Deployment: ```shell $ kubectl get deployments NAME DESIRED CURRENT UP-TO-DATE AVAILABLE AGE nginx-deployment 3 3 3 3 36s ``` The number of up-to-date replicas indicates that the Deployment has updated the replicas to the latest configuration. The current replicas indicates the total replicas this Deployment manages, and the available replicas indicates the number of current replicas that are available. We can run `kubectl get rs` to see that the Deployment updated the Pods by creating a new ReplicaSet and scaling it up to 3 replicas, as well as scaling down the old ReplicaSet to 0 replicas. ```shell $ kubectl get rs NAME DESIRED CURRENT READY AGE nginx-deployment-1564180365 3 3 3 6s nginx-deployment-2035384211 0 0 0 36s ``` Running `get pods` should now show only the new Pods: ```shell $ kubectl get pods NAME READY STATUS RESTARTS AGE nginx-deployment-1564180365-khku8 1/1 Running 0 14s nginx-deployment-1564180365-nacti 1/1 Running 0 14s nginx-deployment-1564180365-z9gth 1/1 Running 0 14s ``` Next time we want to update these Pods, we only need to update the Deployment's pod template again. Deployment can ensure that only a certain number of Pods may be down while they are being updated. By default, it ensures that at least 1 less than the desired number of Pods are up (1 max unavailable). Deployment can also ensure that only a certain number of Pods may be created above the desired number of Pods. By default, it ensures that at most 1 more than the desired number of Pods are up (1 max surge). In a future version of Kubernetes, the defaults will change from 1-1 to 25%-25%. For example, if you look at the above Deployment closely, you will see that it first created a new Pod, then deleted some old Pods and created new ones. It does not kill old Pods until a sufficient number of new Pods have come up, and does not create new Pods until a sufficient number of old Pods have been killed. It makes sure that number of available Pods is at least 2 and the number of total Pods is at most 4. ```shell $ kubectl describe deployments Name: nginx-deployment Namespace: default CreationTimestamp: Tue, 15 Mar 2016 12:01:06 -0700 Labels: app=nginx Selector: app=nginx Replicas: 3 updated | 3 total | 3 available | 0 unavailable StrategyType: RollingUpdate MinReadySeconds: 0 RollingUpdateStrategy: 1 max unavailable, 1 max surge OldReplicaSets: NewReplicaSet: nginx-deployment-1564180365 (3/3 replicas created) Events: FirstSeen LastSeen Count From SubobjectPath Type Reason Message --------- -------- ----- ---- ------------- -------- ------ ------- 36s 36s 1 {deployment-controller } Normal ScalingReplicaSet Scaled up replica set nginx-deployment-2035384211 to 3 23s 23s 1 {deployment-controller } Normal ScalingReplicaSet Scaled up replica set nginx-deployment-1564180365 to 1 23s 23s 1 {deployment-controller } Normal ScalingReplicaSet Scaled down replica set nginx-deployment-2035384211 to 2 23s 23s 1 {deployment-controller } Normal ScalingReplicaSet Scaled up replica set nginx-deployment-1564180365 to 2 21s 21s 1 {deployment-controller } Normal ScalingReplicaSet Scaled down replica set nginx-deployment-2035384211 to 0 21s 21s 1 {deployment-controller } Normal ScalingReplicaSet Scaled up replica set nginx-deployment-1564180365 to 3 ``` Here we see that when we first created the Deployment, it created a ReplicaSet (nginx-deployment-2035384211) and scaled it up to 3 replicas directly. When we updated the Deployment, it created a new ReplicaSet (nginx-deployment-1564180365) and scaled it up to 1 and then scaled down the old ReplicaSet to 2, so that at least 2 Pods were available and at most 4 Pods were created at all times. It then continued scaling up and down the new and the old ReplicaSet, with the same rolling update strategy. Finally, we'll have 3 available replicas in the new ReplicaSet, and the old ReplicaSet is scaled down to 0. ### Rollover (aka multiple updates in-flight) Each time a new deployment object is observed by the deployment controller, a ReplicaSet is created to bring up the desired Pods if there is no existing ReplicaSet doing so. Existing ReplicaSet controlling Pods whose labels match `.spec.selector` but whose template does not match `.spec.template` are scaled down. Eventually, the new ReplicaSet will be scaled to `.spec.replicas` and all old ReplicaSets will be scaled to 0. If you update a Deployment while an existing rollout is in progress, the Deployment will create a new ReplicaSet as per the update and start scaling that up, and will roll over the ReplicaSet that it was scaling up previously -- it will add it to its list of old ReplicaSets and will start scaling it down. For example, suppose you create a Deployment to create 5 replicas of `nginx:1.7.9`, but then updates the Deployment to create 5 replicas of `nginx:1.9.1`, when only 3 replicas of `nginx:1.7.9` had been created. In that case, Deployment will immediately start killing the 3 `nginx:1.7.9` Pods that it had created, and will start creating `nginx:1.9.1` Pods. It will not wait for 5 replicas of `nginx:1.7.9` to be created before changing course. ### Label selector updates It is generally discouraged to make label selector updates and it is suggested to plan your selectors up front. In any case, if you need to perform a label selector update, exercise great caution and make sure you have grasped all of the implications. * Selector additions require the pod template labels in the Deployment spec to be updated with the new label too, otherwise a validation error is returned. This change is a non-overlapping one, meaning that the new selector does not select ReplicaSets and Pods created with the old selector, resulting in orphaning all old ReplicaSets and creating a new ReplicaSet. * Selector updates -- that is, changing the existing value in a selector key -- result in the same behavior as additions. * Selector removals -- that is, removing an existing key from the Deployment selector -- do not require any changes in the pod template labels. No existing ReplicaSet is orphaned, and a new ReplicaSet is not created, but note that the removed label still exists in any existing Pods and ReplicaSets. ## Rolling Back a Deployment Sometimes you may want to rollback a Deployment; for example, when the Deployment is not stable, such as crash looping. By default, all of the Deployment's rollout history is kept in the system so that you can rollback anytime you want (you can change that by modifyingrevision history limit]). **Note:** a Deployment's revision is created when a Deployment's rollout is triggered. This means that the new revision is created if and only if the Deployment's pod template (`.spec.template`) is changed, for example if you update the labels or container images of the template. Other updates, such as scaling the Deployment, do not create a Deployment revision, so that we can facilitate simultaneous manual- or auto-scaling. This means that when you roll back to an earlier revision, only the Deployment's pod template part is rolled back. {: .note} Suppose that we made a typo while updating the Deployment, by putting the image name as `nginx:1.91` instead of `nginx:1.9.1`: ```shell $ kubectl set image deployment/nginx-deployment nginx=nginx:1.91 deployment "nginx-deployment" image updated ``` The rollout will be stuck. ```shell $ kubectl rollout status deployments nginx-deployment Waiting for rollout to finish: 2 out of 3 new replicas have been updated... ``` Press Ctrl-C to stop the above rollout status watch. For more information on stuck rollouts, [read more here](#deployment-status). You will also see that both the number of old replicas (nginx-deployment-1564180365 and nginx-deployment-2035384211) and new replicas (nginx-deployment-3066724191) are 2. ```shell $ kubectl get rs NAME DESIRED CURRENT READY AGE nginx-deployment-1564180365 2 2 0 25s nginx-deployment-2035384211 0 0 0 36s nginx-deployment-3066724191 2 2 2 6s ``` Looking at the Pods created, you will see that the 2 Pods created by new ReplicaSet are stuck in an image pull loop. ```shell $ kubectl get pods NAME READY STATUS RESTARTS AGE nginx-deployment-1564180365-70iae 1/1 Running 0 25s nginx-deployment-1564180365-jbqqo 1/1 Running 0 25s nginx-deployment-3066724191-08mng 0/1 ImagePullBackOff 0 6s nginx-deployment-3066724191-eocby 0/1 ImagePullBackOff 0 6s ``` **Note:** The Deployment controller will stop the bad rollout automatically, and will stop scaling up the new ReplicaSet. This depends on the rollingUpdate parameters (`maxUnavailable` specifically) that you have specified. Kubernetes by default sets the value to 1 and spec.replicas to 1 so if you haven't cared about setting those parameters, your Deployment can have 100% unavailability by default! This will be fixed in Kubernetes in a future version. {: .note} ```shell $ kubectl describe deployment Name: nginx-deployment Namespace: default CreationTimestamp: Tue, 15 Mar 2016 14:48:04 -0700 Labels: app=nginx Selector: app=nginx Replicas: 2 updated | 3 total | 2 available | 2 unavailable StrategyType: RollingUpdate MinReadySeconds: 0 RollingUpdateStrategy: 1 max unavailable, 1 max surge OldReplicaSets: nginx-deployment-1564180365 (2/2 replicas created) NewReplicaSet: nginx-deployment-3066724191 (2/2 replicas created) Events: FirstSeen LastSeen Count From SubobjectPath Type Reason Message --------- -------- ----- ---- ------------- -------- ------ ------- 1m 1m 1 {deployment-controller } Normal ScalingReplicaSet Scaled up replica set nginx-deployment-2035384211 to 3 22s 22s 1 {deployment-controller } Normal ScalingReplicaSet Scaled up replica set nginx-deployment-1564180365 to 1 22s 22s 1 {deployment-controller } Normal ScalingReplicaSet Scaled down replica set nginx-deployment-2035384211 to 2 22s 22s 1 {deployment-controller } Normal ScalingReplicaSet Scaled up replica set nginx-deployment-1564180365 to 2 21s 21s 1 {deployment-controller } Normal ScalingReplicaSet Scaled down replica set nginx-deployment-2035384211 to 0 21s 21s 1 {deployment-controller } Normal ScalingReplicaSet Scaled up replica set nginx-deployment-1564180365 to 3 13s 13s 1 {deployment-controller } Normal ScalingReplicaSet Scaled up replica set nginx-deployment-3066724191 to 1 13s 13s 1 {deployment-controller } Normal ScalingReplicaSet Scaled down replica set nginx-deployment-1564180365 to 2 13s 13s 1 {deployment-controller } Normal ScalingReplicaSet Scaled up replica set nginx-deployment-3066724191 to 2 ``` To fix this, we need to rollback to a previous revision of Deployment that is stable. ### Checking Rollout History of a Deployment First, check the revisions of this deployment: ```shell $ kubectl rollout history deployment/nginx-deployment deployments "nginx-deployment" REVISION CHANGE-CAUSE 1 kubectl create -f docs/user-guide/nginx-deployment.yaml --record 2 kubectl set image deployment/nginx-deployment nginx=nginx:1.9.1 3 kubectl set image deployment/nginx-deployment nginx=nginx:1.91 ``` Because we recorded the command while creating this Deployment using `--record`, we can easily see the changes we made in each revision. To further see the details of each revision, run: ```shell $ kubectl rollout history deployment/nginx-deployment --revision=2 deployments "nginx-deployment" revision 2 Labels: app=nginx pod-template-hash=1159050644 Annotations: kubernetes.io/change-cause=kubectl set image deployment/nginx-deployment nginx=nginx:1.9.1 Containers: nginx: Image: nginx:1.9.1 Port: 80/TCP QoS Tier: cpu: BestEffort memory: BestEffort Environment Variables: No volumes. ``` ### Rolling Back to a Previous Revision Now we've decided to undo the current rollout and rollback to the previous revision: ```shell $ kubectl rollout undo deployment/nginx-deployment deployment "nginx-deployment" rolled back ``` Alternatively, you can rollback to a specific revision by specify that in `--to-revision`: ```shell $ kubectl rollout undo deployment/nginx-deployment --to-revision=2 deployment "nginx-deployment" rolled back ``` For more details about rollout related commands, read [`kubectl rollout`](/docs/user-guide/kubectl/{{page.version}}/#rollout). The Deployment is now rolled back to a previous stable revision. As you can see, a `DeploymentRollback` event for rolling back to revision 2 is generated from Deployment controller. ```shell $ kubectl get deployment NAME DESIRED CURRENT UP-TO-DATE AVAILABLE AGE nginx-deployment 3 3 3 3 30m $ kubectl describe deployment Name: nginx-deployment Namespace: default CreationTimestamp: Tue, 15 Mar 2016 14:48:04 -0700 Labels: app=nginx Selector: app=nginx Replicas: 3 updated | 3 total | 3 available | 0 unavailable StrategyType: RollingUpdate MinReadySeconds: 0 RollingUpdateStrategy: 1 max unavailable, 1 max surge OldReplicaSets: NewReplicaSet: nginx-deployment-1564180365 (3/3 replicas created) Events: FirstSeen LastSeen Count From SubobjectPath Type Reason Message --------- -------- ----- ---- ------------- -------- ------ ------- 30m 30m 1 {deployment-controller } Normal ScalingReplicaSet Scaled up replica set nginx-deployment-2035384211 to 3 29m 29m 1 {deployment-controller } Normal ScalingReplicaSet Scaled up replica set nginx-deployment-1564180365 to 1 29m 29m 1 {deployment-controller } Normal ScalingReplicaSet Scaled down replica set nginx-deployment-2035384211 to 2 29m 29m 1 {deployment-controller } Normal ScalingReplicaSet Scaled up replica set nginx-deployment-1564180365 to 2 29m 29m 1 {deployment-controller } Normal ScalingReplicaSet Scaled down replica set nginx-deployment-2035384211 to 0 29m 29m 1 {deployment-controller } Normal ScalingReplicaSet Scaled up replica set nginx-deployment-3066724191 to 2 29m 29m 1 {deployment-controller } Normal ScalingReplicaSet Scaled up replica set nginx-deployment-3066724191 to 1 29m 29m 1 {deployment-controller } Normal ScalingReplicaSet Scaled down replica set nginx-deployment-1564180365 to 2 2m 2m 1 {deployment-controller } Normal ScalingReplicaSet Scaled down replica set nginx-deployment-3066724191 to 0 2m 2m 1 {deployment-controller } Normal DeploymentRollback Rolled back deployment "nginx-deployment" to revision 2 29m 2m 2 {deployment-controller } Normal ScalingReplicaSet Scaled up replica set nginx-deployment-1564180365 to 3 ``` ## Scaling a Deployment You can scale a Deployment by using the following command: ```shell $ kubectl scale deployment nginx-deployment --replicas 10 deployment "nginx-deployment" scaled ``` Assuming [horizontal pod autoscaling](/docs/tasks/run-application/horizontal-pod-autoscale-walkthrough/) is enabled in your cluster, you can setup an autoscaler for your Deployment and choose the minimum and maximum number of Pods you want to run based on the CPU utilization of your existing Pods. ```shell $ kubectl autoscale deployment nginx-deployment --min=10 --max=15 --cpu-percent=80 deployment "nginx-deployment" autoscaled ``` ### Proportional scaling RollingUpdate Deployments support running multiple versions of an application at the same time. When you or an autoscaler scales a RollingUpdate Deployment that is in the middle of a rollout (either in progress or paused), then the Deployment controller will balance the additional replicas in the existing active ReplicaSets (ReplicaSets with Pods) in order to mitigate risk. This is called *proportional scaling*. For example, you are running a Deployment with 10 replicas, [maxSurge](#max-surge)=3, and [maxUnavailable](#max-unavailable)=2. ```shell $ kubectl get deploy NAME DESIRED CURRENT UP-TO-DATE AVAILABLE AGE nginx-deployment 10 10 10 10 50s ``` You update to a new image which happens to be unresolvable from inside the cluster. ```shell $ kubectl set image deploy/nginx-deployment nginx=nginx:sometag deployment "nginx-deployment" image updated ``` The image update starts a new rollout with ReplicaSet nginx-deployment-1989198191 but it's blocked due to the maxUnavailable requirement that we mentioned above. ```shell $ kubectl get rs NAME DESIRED CURRENT READY AGE nginx-deployment-1989198191 5 5 0 9s nginx-deployment-618515232 8 8 8 1m ``` Then a new scaling request for the Deployment comes along. The autoscaler increments the Deployment replicas to 15. The Deployment controller needs to decide where to add these new 5 replicas. If we weren't using proportional scaling, all 5 of them would be added in the new ReplicaSet. With proportional scaling, we spread the additional replicas across all ReplicaSets. Bigger proportions go to the ReplicaSets with the most replicas and lower proportions go to ReplicaSets with less replicas. Any leftovers are added to the ReplicaSet with the most replicas. ReplicaSets with zero replicas are not scaled up. In our example above, 3 replicas will be added to the old ReplicaSet and 2 replicas will be added to the new ReplicaSet. The rollout process should eventually move all replicas to the new ReplicaSet, assuming the new replicas become healthy. ```shell $ kubectl get deploy NAME DESIRED CURRENT UP-TO-DATE AVAILABLE AGE nginx-deployment 15 18 7 8 7m $ kubectl get rs NAME DESIRED CURRENT READY AGE nginx-deployment-1989198191 7 7 0 7m nginx-deployment-618515232 11 11 11 7m ``` ## Pausing and Resuming a Deployment You can pause a Deployment before triggering one or more updates and then resume it. This will allow you to apply multiple fixes in between pausing and resuming without triggering unnecessary rollouts. For example, with a Deployment that was just created: ```shell $ kubectl get deploy NAME DESIRED CURRENT UP-TO-DATE AVAILABLE AGE nginx 3 3 3 3 1m $ kubectl get rs NAME DESIRED CURRENT READY AGE nginx-2142116321 3 3 3 1m ``` Pause by running the following command: ```shell $ kubectl rollout pause deployment/nginx-deployment deployment "nginx-deployment" paused ``` Then update the image of the Deployment: ```shell $ kubectl set image deploy/nginx-deployment nginx=nginx:1.9.1 deployment "nginx-deployment" image updated ``` Notice that no new rollout started: ```shell $ kubectl rollout history deploy/nginx-deployment deployments "nginx" REVISION CHANGE-CAUSE 1 $ kubectl get rs NAME DESIRED CURRENT READY AGE nginx-2142116321 3 3 3 2m ``` You can make as many updates as you wish, for example, update the resources that will be used: ```shell $ kubectl set resources deployment nginx -c=nginx --limits=cpu=200m,memory=512Mi deployment "nginx" resource requirements updated ``` The initial state of the Deployment prior to pausing it will continue its function, but new updates to the Deployment will not have any effect as long as the Deployment is paused. Eventually, resume the Deployment and observe a new ReplicaSet coming up with all the new updates: ```shell $ kubectl rollout resume deploy/nginx-deployment deployment "nginx" resumed $ kubectl get rs -w NAME DESIRED CURRENT READY AGE nginx-2142116321 2 2 2 2m nginx-3926361531 2 2 0 6s nginx-3926361531 2 2 1 18s nginx-2142116321 1 2 2 2m nginx-2142116321 1 2 2 2m nginx-3926361531 3 2 1 18s nginx-3926361531 3 2 1 18s nginx-2142116321 1 1 1 2m nginx-3926361531 3 3 1 18s nginx-3926361531 3 3 2 19s nginx-2142116321 0 1 1 2m nginx-2142116321 0 1 1 2m nginx-2142116321 0 0 0 2m nginx-3926361531 3 3 3 20s ^C $ kubectl get rs NAME DESIRED CURRENT READY AGE nginx-2142116321 0 0 0 2m nginx-3926361531 3 3 3 28s ``` **Note:** You cannot rollback a paused Deployment until you resume it. {: .note} ## Deployment status A Deployment enters various states during its lifecycle. It can be [progressing](#progressing-deployment) while rolling out a new ReplicaSet, it can be [complete](#complete-deployment), or it can [fail to progress](#failed-deployment). ### Progressing Deployment Kubernetes marks a Deployment as _progressing_ when one of the following tasks is performed: * The Deployment creates a new ReplicaSet. * The Deployment is scaling up its newest ReplicaSet. * The Deployment is scaling down its older ReplicaSet(s). * New Pods become ready or available (ready for at least [MinReadySeconds](#min-ready-seconds)). You can monitor the progress for a Deployment by using `kubectl rollout status`. ### Complete Deployment Kubernetes marks a Deployment as _complete_ when it has the following characteristics: * All of the replicas associated with the Deployment have been updated to the latest version you've specified, meaning any updates you've requested have been completed. * All of the replicas associated with the Deployment are available. * No old replicas for the Deployment are running. You can check if a Deployment has completed by using `kubectl rollout status`. If the rollout completed successfully, `kubectl rollout status` returns a zero exit code. ```shell $ kubectl rollout status deploy/nginx-deployment Waiting for rollout to finish: 2 of 3 updated replicas are available... deployment "nginx" successfully rolled out $ echo $? 0 ``` ### Failed Deployment Your Deployment may get stuck trying to deploy its newest ReplicaSet without ever completing. This can occur due to some of the following factors: * Insufficient quota * Readiness probe failures * Image pull errors * Insufficient permissions * Limit ranges * Application runtime misconfiguration One way you can detect this condition is to specify a deadline parameter in your Deployment spec: ([`spec.progressDeadlineSeconds`](#progress-deadline-seconds)). `spec.progressDeadlineSeconds` denotes the number of seconds the Deployment controller waits before indicating (in the Deployment status) that the Deployment progress has stalled. The following `kubectl` command sets the spec with `progressDeadlineSeconds` to make the controller report lack of progress for a Deployment after 10 minutes: ```shell $ kubectl patch deployment/nginx-deployment -p '{"spec":{"progressDeadlineSeconds":600}}' "nginx-deployment" patched ``` Once the deadline has been exceeded, the Deployment controller adds a DeploymentCondition with the following attributes to the Deployment's `status.conditions`: * Type=Progressing * Status=False * Reason=ProgressDeadlineExceeded See the [Kubernetes API conventions](https://git.k8s.io/community/contributors/devel/api-conventions.md#typical-status-properties) for more information on status conditions. **Note:** Kubernetes will take no action on a stalled Deployment other than to report a status condition with `Reason=ProgressDeadlineExceeded`. Higher level orchestrators can take advantage of it and act accordingly, for example, rollback the Deployment to its previous version. {: .note} **Note:** If you pause a Deployment, Kubernetes does not check progress against your specified deadline. You can safely pause a Deployment in the middle of a rollout and resume without triggering the condition for exceeding the deadline. {: .note} You may experience transient errors with your Deployments, either due to a low timeout that you have set or due to any other kind of error that can be treated as transient. For example, let's suppose you have insufficient quota. If you describe the Deployment you will notice the following section: ```shell $ kubectl describe deployment nginx-deployment <...> Conditions: Type Status Reason ---- ------ ------ Available True MinimumReplicasAvailable Progressing True ReplicaSetUpdated ReplicaFailure True FailedCreate <...> ``` If you run `kubectl get deployment nginx-deployment -o yaml`, the Deployement status might look like this: ``` status: availableReplicas: 2 conditions: - lastTransitionTime: 2016-10-04T12:25:39Z lastUpdateTime: 2016-10-04T12:25:39Z message: Replica set "nginx-deployment-4262182780" is progressing. reason: ReplicaSetUpdated status: "True" type: Progressing - lastTransitionTime: 2016-10-04T12:25:42Z lastUpdateTime: 2016-10-04T12:25:42Z message: Deployment has minimum availability. reason: MinimumReplicasAvailable status: "True" type: Available - lastTransitionTime: 2016-10-04T12:25:39Z lastUpdateTime: 2016-10-04T12:25:39Z message: 'Error creating: pods "nginx-deployment-4262182780-" is forbidden: exceeded quota: object-counts, requested: pods=1, used: pods=3, limited: pods=2' reason: FailedCreate status: "True" type: ReplicaFailure observedGeneration: 3 replicas: 2 unavailableReplicas: 2 ``` Eventually, once the Deployment progress deadline is exceeded, Kubernetes updates the status and the reason for the Progressing condition: ``` Conditions: Type Status Reason ---- ------ ------ Available True MinimumReplicasAvailable Progressing False ProgressDeadlineExceeded ReplicaFailure True FailedCreate ``` You can address an issue of insufficient quota by scaling down your Deployment, by scaling down other controllers you may be running, or by increasing quota in your namespace. If you satisfy the quota conditions and the Deployment controller then completes the Deployment rollout, you'll see the Deployment's status update with a successful condition (`Status=True` and `Reason=NewReplicaSetAvailable`). ``` Conditions: Type Status Reason ---- ------ ------ Available True MinimumReplicasAvailable Progressing True NewReplicaSetAvailable ``` `Type=Available` with `Status=True` means that your Deployment has minimum availability. Minimum availability is dictated by the parameters specified in the deployment strategy. `Type=Progressing` with `Status=True` means that your Deployment is either in the middle of a rollout and it is progressing or that it has successfully completed its progress and the minimum required new replicas are available (see the Reason of the condition for the particulars - in our case `Reason=NewReplicaSetAvailable` means that the Deployment is complete). You can check if a Deployment has failed to progress by using `kubectl rollout status`. `kubectl rollout status` returns a non-zero exit code if the Deployment has exceeded the progression deadline. ```shell $ kubectl rollout status deploy/nginx-deployment Waiting for rollout to finish: 2 out of 3 new replicas have been updated... error: deployment "nginx" exceeded its progress deadline $ echo $? 1 ``` ### Operating on a failed deployment All actions that apply to a complete Deployment also apply to a failed Deployment. You can scale it up/down, roll back to a previous revision, or even pause it if you need to apply multiple tweaks in the Deployment pod template. ## Clean up Policy You can set `.spec.revisionHistoryLimit` field in a Deployment to specify how many old ReplicaSets for this Deployment you want to retain. The rest will be garbage-collected in the background. By default, all revision history will be kept. In a future version, it will default to switch to 2. **Note:** Explicitly setting this field to 0, will result in cleaning up all the history of your Deployment thus that Deployment will not be able to roll back. {: .note} ## Use Cases ### Canary Deployment If you want to roll out releases to a subset of users or servers using the Deployment, you can create multiple Deployments, one for each release, following the canary pattern described in [managing resources](/docs/concepts/cluster-administration/manage-deployment/#canary-deployments). ## Writing a Deployment Spec As with all other Kubernetes configs, a Deployment needs `apiVersion`, `kind`, and `metadata` fields. For general information about working with config files, see [deploying applications](/docs/tutorials/stateless-application/run-stateless-application-deployment/), configuring containers, and [using kubectl to manage resources](/docs/tutorials/object-management-kubectl/object-management/) documents. A Deployment also needs a [`.spec` section](https://git.k8s.io/community/contributors/devel/api-conventions.md#spec-and-status). ### Pod Template The `.spec.template` is the only required field of the `.spec`. The `.spec.template` is a [pod template](/docs/concepts/workloads/pods/pod-overview/#pod-templates). It has exactly the same schema as a [Pod](/docs/concepts/workloads/pods/pod/), except it is nested and does not have an `apiVersion` or `kind`. In addition to required fields for a Pod, a pod template in a Deployment must specify appropriate labels and an appropriate restart policy. For labels, make sure not to overlap with other controllers. See [selector](#selector)). Only a [`.spec.template.spec.restartPolicy`](/docs/concepts/workloads/pods/pod-lifecycle/) equal to `Always` is allowed, which is the default if not specified. ### Replicas `.spec.replicas` is an optional field that specifies the number of desired Pods. It defaults to 1. ### Selector `.spec.selector` is an optional field that specifies a [label selector](/docs/concepts/overview/working-with-objects/labels/) for the Pods targeted by this deployment. If specified, `.spec.selector` must match `.spec.template.metadata.labels`, or it will be rejected by the API. If `.spec.selector` is unspecified, `.spec.selector.matchLabels` defaults to `.spec.template.metadata.labels`. A Deployment may terminate Pods whose labels match the selector if their template is different from `.spec.template` or if the total number of such Pods exceeds `.spec.replicas`. It brings up new Pods with `.spec.template` if the number of Pods is less than the desired number. **Note:** You should not create other pods whose labels match this selector, either directly, by creating another Deployment, or by creating another controller such as a ReplicaSet or a ReplicationController. If you do so, the first Deployment thinks that it created these other pods. Kubernetes does not stop you from doing this. {: .note} If you have multiple controllers that have overlapping selectors, the controllers will fight with each other and won't behave correctly. ### Strategy `.spec.strategy` specifies the strategy used to replace old Pods by new ones. `.spec.strategy.type` can be "Recreate" or "RollingUpdate". "RollingUpdate" is the default value. #### Recreate Deployment All existing Pods are killed before new ones are created when `.spec.strategy.type==Recreate`. #### Rolling Update Deployment The Deployment updates Pods in a [rolling update](/docs/tasks/run-application/rolling-update-replication-controller/) fashion when `.spec.strategy.type==RollingUpdate`. You can specify `maxUnavailable` and `maxSurge` to control the rolling update process. ##### Max Unavailable `.spec.strategy.rollingUpdate.maxUnavailable` is an optional field that specifies the maximum number of Pods that can be unavailable during the update process. The value can be an absolute number (for example, 5) or a percentage of desired Pods (for example, 10%). The absolute number is calculated from percentage by rounding down. The value cannot be 0 if `.spec.strategy.rollingUpdate.maxSurge` is 0. The default value is 25%. For example, when this value is set to 30%, the old ReplicaSet can be scaled down to 70% of desired Pods immediately when the rolling update starts. Once new Pods are ready, old ReplicaSet can be scaled down further, followed by scaling up the new ReplicaSet, ensuring that the total number of Pods available at all times during the update is at least 70% of the desired Pods. ##### Max Surge `.spec.strategy.rollingUpdate.maxSurge` is an optional field that specifies the maximum number of Pods that can be created over the desired number of Pods. The value can be an absolute number (for example, 5) or a percentage of desired Pods (for example, 10%). The value cannot be 0 if `MaxUnavailable` is 0. The absolute number is calculated from the percentage by rounding up. The default value is 25%. For example, when this value is set to 30%, the new ReplicaSet can be scaled up immediately when the rolling update starts, such that the total number of old and new Pods does not exceed 130% of desired Pods. Once old Pods have been killed, the new ReplicaSet can be scaled up further, ensuring that the total number of Pods running at any time during the update is at most 130% of desired Pods. ### Progress Deadline Seconds `.spec.progressDeadlineSeconds` is an optional field that specifies the number of seconds you want to wait for your Deployment to progress before the system reports back that the Deployment has [failed progressing](#failed-deployment) - surfaced as a condition with `Type=Progressing`, `Status=False`. and `Reason=ProgressDeadlineExceeded` in the status of the resource. The deployment controller will keep retrying the Deployment. In the future, once automatic rollback will be implemented, the deployment controller will roll back a Deployment as soon as it observes such a condition. If specified, this field needs to be greater than `.spec.minReadySeconds`. ### Min Ready Seconds `.spec.minReadySeconds` is an optional field that specifies the minimum number of seconds for which a newly created Pod should be ready without any of its containers crashing, for it to be considered available. This defaults to 0 (the Pod will be considered available as soon as it is ready). To learn more about when a Pod is considered ready, see [Container Probes](/docs/concepts/workloads/pods/pod-lifecycle/#container-probes). ### Rollback To `.spec.rollbackTo` is an optional field with the configuration the Deployment should roll back to. Setting this field triggers a rollback, and this field will be cleared by the server after a rollback is done. Because this field will be cleared by the server, it should not be used declaratively. For example, you should not perform `kubectl apply` with a manifest with `.spec.rollbackTo` field set. #### Revision `.spec.rollbackTo.revision` is an optional field specifying the revision to roll back to. Setting to 0 means rolling back to the last revision in history; otherwise, means rolling back to the specified revision. This defaults to 0 when [`spec.rollbackTo`](#rollback-to) is set. ### Revision History Limit A Deployment's revision history is stored in the replica sets it controls. `.spec.revisionHistoryLimit` is an optional field that specifies the number of old ReplicaSets to retain to allow rollback. Its ideal value depends on the frequency and stability of new Deployments. All old ReplicaSets will be kept by default, consuming resources in `etcd` and crowding the output of `kubectl get rs`, if this field is not set. The configuration of each Deployment revision is stored in its ReplicaSets; therefore, once an old ReplicaSet is deleted, you lose the ability to rollback to that revision of Deployment. More specifically, setting this field to zero means that all old ReplicaSets with 0 replica will be cleaned up. In this case, a new Deployment rollout cannot be undone, since its revision history is cleaned up. ### Paused `.spec.paused` is an optional boolean field for pausing and resuming a Deployment. The only difference between a paused Deployment and one that is not paused, is that any changes into the PodTemplateSpec of the paused Deployment will not trigger new rollouts as long as it is paused. A Deployment is not paused by default when it is created. ## Alternative to Deployments ### kubectl rolling update [Kubectl rolling update](/docs/user-guide/kubectl/{{page.version}}/#rolling-update) updates Pods and ReplicationControllers in a similar fashion. But Deployments are recommended, since they are declarative, server side, and have additional features, such as rolling back to any previous revision even after the rolling update is done. {% endcapture %} {% include templates/concept.md %}