--- assignees: - derekwaynecarr - janetkuo title: Setting Pod CPU and Memory Limits --- By default, pods run with unbounded CPU and memory limits. This means that any pod in the system will be able to consume as much CPU and memory on the node that executes the pod. Users may want to impose restrictions on the amount of resources a single pod in the system may consume for a variety of reasons. For example: 1. Each node in the cluster has 2GB of memory. The cluster operator does not want to accept pods that require more than 2GB of memory since no node in the cluster can support the requirement. To prevent a pod from being permanently unscheduled to a node, the operator instead chooses to reject pods that exceed 2GB of memory as part of admission control. 2. A cluster is shared by two communities in an organization that runs production and development workloads respectively. Production workloads may consume up to 8GB of memory, but development workloads may consume up to 512MB of memory. The cluster operator creates a separate namespace for each workload, and applies limits to each namespace. 3. Users may create a pod which consumes resources just below the capacity of a machine. The left over space may be too small to be useful, but big enough for the waste to be costly over the entire cluster. As a result, the cluster operator may want to set limits that a pod must consume at least 20% of the memory and CPU of their average node size in order to provide for more uniform scheduling and to limit waste. This example demonstrates how limits can be applied to a Kubernetes [namespace](/docs/admin/namespaces/walkthrough/) to control min/max resource limits per pod. In addition, this example demonstrates how you can apply default resource limits to pods in the absence of an end-user specified value. See [LimitRange design doc](https://github.com/kubernetes/kubernetes/blob/{{page.githubbranch}}/docs/design/admission_control_limit_range.md) for more information. For a detailed description of the Kubernetes resource model, see [Resources](/docs/user-guide/compute-resources/) ## Step 0: Prerequisites This example requires a running Kubernetes cluster. See the [Getting Started guides](/docs/getting-started-guides/) for how to get started. Change to the `` directory if you're not already there. ## Step 1: Create a namespace This example will work in a custom namespace to demonstrate the concepts involved. Let's create a new namespace called limit-example: ```shell $ kubectl create namespace limit-example namespace "limit-example" created ``` Note that `kubectl` commands will print the type and name of the resource created or mutated, which can then be used in subsequent commands: ```shell $ kubectl get namespaces NAME STATUS AGE default Active 51s limit-example Active 45s ``` ## Step 2: Apply a limit to the namespace Let's create a simple limit in our namespace. ```shell $ kubectl create -f docs/admin/limitrange/limits.yaml --namespace=limit-example limitrange "mylimits" created ``` Let's describe the limits that we have imposed in our namespace. ```shell $ kubectl describe limits mylimits --namespace=limit-example Name: mylimits Namespace: limit-example Type Resource Min Max Default Request Default Limit Max Limit/Request Ratio ---- -------- --- --- --------------- ------------- ----------------------- Pod cpu 200m 2 - - - Pod memory 6Mi 1Gi - - - Container cpu 100m 2 200m 300m - Container memory 3Mi 1Gi 100Mi 200Mi - ``` In this scenario, we have said the following: 1. If a max constraint is specified for a resource (2 CPU and 1Gi memory in this case), then a limit must be specified for that resource across all containers. Failure to specify a limit will result in a validation error when attempting to create the pod. Note that a default value of limit is set by *default* in file `limits.yaml` (300m CPU and 200Mi memory). 2. If a min constraint is specified for a resource (100m CPU and 3Mi memory in this case), then a request must be specified for that resource across all containers. Failure to specify a request will result in a validation error when attempting to create the pod. Note that a default value of request is set by *defaultRequest* in file `limits.yaml` (200m CPU and 100Mi memory). 3. For any pod, the sum of all containers memory requests must be >= 6Mi and the sum of all containers memory limits must be <= 1Gi; the sum of all containers CPU requests must be >= 200m and the sum of all containers CPU limits must be <= 2. ## Step 3: Enforcing limits at point of creation The limits enumerated in a namespace are only enforced when a pod is created or updated in the cluster. If you change the limits to a different value range, it does not affect pods that were previously created in a namespace. If a resource (CPU or memory) is being restricted by a limit, the user will get an error at time of creation explaining why. Let's first spin up a [Deployment](/docs/user-guide/deployments) that creates a single container Pod to demonstrate how default values are applied to each pod. ```shell $ kubectl run nginx --image=nginx --replicas=1 --namespace=limit-example deployment "nginx" created ``` Note that `kubectl run` creates a Deployment named "nginx" on Kubernetes cluster >= v1.2. If you are running older versions, it creates replication controllers instead. If you want to obtain the old behavior, use `--generator=run/v1` to create replication controllers. See [`kubectl run`](/docs/user-guide/kubectl/kubectl_run/) for more details. The Deployment manages 1 replica of single container Pod. Let's take a look at the Pod it manages. First, find the name of the Pod: ```shell $ kubectl get pods --namespace=limit-example NAME READY STATUS RESTARTS AGE nginx-2040093540-s8vzu 1/1 Running 0 11s ``` Let's print this Pod with yaml output format (using `-o yaml` flag), and then `grep` the `resources` field. Note that your pod name will be different. ```shell $ kubectl get pods nginx-2040093540-s8vzu --namespace=limit-example -o yaml | grep resources -C 8 resourceVersion: "57" selfLink: /api/v1/namespaces/limit-example/pods/nginx-2040093540-ivimu uid: 67b20741-f53b-11e5-b066-64510658e388 spec: containers: - image: nginx imagePullPolicy: Always name: nginx resources: limits: cpu: 300m memory: 200Mi requests: cpu: 200m memory: 100Mi terminationMessagePath: /dev/termination-log volumeMounts: ``` Note that our nginx container has picked up the namespace default CPU and memory resource *limits* and *requests*. Let's create a pod that exceeds our allowed limits by having it have a container that requests 3 CPU cores. ```shell $ kubectl create -f docs/admin/limitrange/invalid-pod.yaml --namespace=limit-example Error from server: error when creating "docs/admin/limitrange/invalid-pod.yaml": Pod "invalid-pod" is forbidden: [Maximum cpu usage per Pod is 2, but limit is 3., Maximum cpu usage per Container is 2, but limit is 3.] ``` Let's create a pod that falls within the allowed limit boundaries. ```shell $ kubectl create -f docs/admin/limitrange/valid-pod.yaml --namespace=limit-example pod "valid-pod" created ``` Now look at the Pod's resources field: ```shell $ kubectl get pods valid-pod --namespace=limit-example -o yaml | grep -C 6 resources uid: 3b1bfd7a-f53c-11e5-b066-64510658e388 spec: containers: - image: gcr.io/google_containers/serve_hostname imagePullPolicy: Always name: kubernetes-serve-hostname resources: limits: cpu: "1" memory: 512Mi requests: cpu: "1" memory: 512Mi ``` Note that this pod specifies explicit resource *limits* and *requests* so it did not pick up the namespace default values. Note: The *limits* for CPU resource are enforced in the default Kubernetes setup on the physical node that runs the container unless the administrator deploys the kubelet with the following flag: ```shell $ kubelet --help Usage of kubelet .... --cpu-cfs-quota[=true]: Enable CPU CFS quota enforcement for containers that specify CPU limits $ kubelet --cpu-cfs-quota=false ... ``` ## Step 4: Cleanup To remove the resources used by this example, you can just delete the limit-example namespace. ```shell $ kubectl delete namespace limit-example namespace "limit-example" deleted $ kubectl get namespaces NAME STATUS AGE default Active 12m ``` ## Summary Cluster operators that want to restrict the amount of resources a single container or pod may consume are able to define allowable ranges per Kubernetes namespace. In the absence of any explicit assignments, the Kubernetes system is able to apply default resource *limits* and *requests* if desired in order to constrain the amount of resource a pod consumes on a node.