* Change deb repo from http to https
Given that http://apt.kubernetes.io/ is redirecting to https://packages.cloud.google.com/apt/ which is secure, then the suggestion is to change the source list to point to the correct destination.
* change apt source to https with apt.kubernetes.io
Hi all,
AFAICT and after reading
[this](https://kubernetes.io/docs/reference/setup-tools/kubeadm/kubeadm-alpha/)
`kubeadm alpha phase kubelet config annotate-cri` should invoked for
consistency in all joining controller nodes (to match what is already
done by default in the seed/initial one).
best regards,
António
Signed-off-by: António Meireles <antonio.meireles@reformi.st>
Current manifest of flannel is old for Kubernetes v1.12 .
Deployment cluster is failed at installing pod network add-on.
This PR update flannel manifest URL.
* Add microk8s to pick-right-solution.md
Microk8s is a single-command installation of upstream Kubernetes on any Linux and should be included in the list of local-machine solutions.
* capitalized Istio
The CentsOS/RHEL/... section mentiones that SELinux must be put in permissive
mode, but the supplied command does the job only for the current boot. Once
the system is restarted SELinux can again enter enforcing mode thus breaking
a Kubernetes cluster.
Fix this by adding a sed command that permanently changes the SELinux mode to
permissive.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
GKE On-Prem | Google Cloud
https://cloud.google.com/gke-on-prem/
Containerize on-premises applications and be cloud-ready. With GKE On-Prem, you get the Google Kubernetes Engine (GKE) experience directly in your data center. ... GKE On-Prem also registers your cluster with Google Cloud Console in order to have a single-pane-of-glass view for managing all your clusters.
* Update docs for fields allowed at root of CRD schema (#9973)
* add plugin docs and examples (#10053)
* docs update to promote TaintNodesByCondition to beta (#9626)
* HPA Specificity Improvements (#8757)
Updated the HPA docs to reference the `autoscaling/v2beta2` API version,
and added documentation about the new fields.
* adjust docs for pod ready++ (#10049)
* Remove --cadvisor-port - has been deprecated since v1.10 (#10023)
Change-Id: Id2a685473a243aef492a98ff450759f39e362557
* Add Documentation for Snapshot Feature (#9948)
* Add documentation for snapshot feature
* Update volume-snapshots.md
* Add dry-run to api-concepts (#10033)
* kubeadm-init: Update the offline support section (#10062)
The update includes the following things (in mind with Kubernetes 1.12):
- Remove the 1.8 image versions
- Add the 1.10 image versions that were missing until now
- Include a comment for the missing arch suffixes in 1.12
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
* Say bye to `DynamicProvisioningScheduling` (#10157)
The mentioned feature gate is now collapsed into `VolumeScheduling`.
xref: kubernetes/kubernetes#67432
* Update ResourceQuota per PriorityClass state for 1.12 (#10229)
* TokenRequest and TokenRequestProjection now beta (#10161)
xref: kubernetes/kubernetes#67349
* Change feature state for kms provider to beta. (#10230)
KMS Provider will be graduating to beta in v1.12, reflecting this change on the website.
* coredns default (#10200)
* Promote ShareProcessNamespace to beta in docs (#9996)
* Add CoreDNS details to DNS Debug docs (#10201)
* add coredns details
* address nits, add query logging section
* Update docs with topology aware dynamic provisioning (#9939)
* Document topology aware volume binding feature
* update for readability
* Update storage-classes.md
* comma splice
* don't abbreviate
* HPA Algorithm Information Improvements (#9780)
* Update HPA docs with more algorithm details
The HPA docs pointed to an out-of-date document for information on the
algorithm details, which users were finding confusing. This sticks a
section on the algorithm in the HPA docs instead, documenting both
general behavior and corner cases.
* Add glossary info, HPA docs on quantities
People often ask about the quantity notation when working with the
metrics APIs, so this adds a glossary entry on quantities (since they're
used elsewhere in the system), and a short explantation in the HPA walkthough.
* Information about HPA readiness and stabilization
This adds information about the new changes to HPA readiness and
stabilization from kubernetes/features#591, and other minor changes that
landed in Kubernetes 1.12.
* Update horizontal-pod-autoscale.md
* Audit 1.12 doc (#9953)
* audit 1.12 document
* remove legacy audit feature
https://github.com/kubernetes/kubernetes/pull/65862
* update feature gate doc
* MountPropagation is now GA (#10090)
* RuntimeClass documentation (#10102)
* RuntimeClass documentation
* Update runtime-class.md
* Add documentation for Scheduler performance tuning (#10048)
* Add documentation for Scheduler performance tuning
* Update scheduler-perf-tuning.md
* TTL controller for cleaning up finished resources (#10064)
* TTL controller for cleaning up finished resources
* Address comments
* Update ttlafterfinished.md
* Bump quota configuration api version (#10217)
* Incremental update from master (#10278)
* fix invalid href of cloud controller manager (#10240)
* fix invalid yaml format (#10238)
* update storage-limits doc with Azure disk part (#10224)
update storage-limits doc with Azure disk part
fix comments
* Update kubelet-config-file.md (#10222)
Update link to KubeletConfiguration struct.
* fix a trivial misspelling (#10244)
* Fix cassandra-statefulset.yaml indent level (#10243)
* Mention minimum etcd versions (#10208)
Source: https://groups.google.com/d/msg/kubernetes-dev/jMPA4JzKiY4/HIx2ugvLBAAJ
* fix 404 error (#10250)
* Small verb tweak (#10190)
Present participle, ftw.
* Add AnchorJS logic for header links (#10155)
* Add AnchorJS JavaScript
* Remove existing inpage_heading logic
* Remove underline from anchor tags
* Use single icon and add touch visibility
* Use paragraph link icon for AnchorJS
* Update Sass to use code formatting in docsContent headers
* Update header size coverage to H3-H6
* fix broken link in kubefed.md (#10254)
* Update the version numbers for the X-Remote-Extra- and Impersonate-Extra- key fixes (#9827)
The fix was cherry picked into 1.11.3, 1.10.7, and 1.9.11:
https://github.com/kubernetes/kubernetes/pull/67162https://github.com/kubernetes/kubernetes/pull/67163https://github.com/kubernetes/kubernetes/pull/67164
* fix typo (#10168)
* fix typo
* addressing comments.
* Update setup-ha-etcd-with-kubeadm.md
* fix typos (#10252)
* fix description of contribute guide (#10253)
* describe truncate feature about advanced audit (#10236)
* describe truncate feature about advanced audit
* Update audit.md
* docs update to promote ScheduleDaemonSetPods to beta (#9923)
* Dynamic volume limit updates for 1.12 (#10211)
* add a placeholder commit
* Update docs for csi volume limits
* Update storage-limits.md
* Add "MayRunAs" value among other GroupStrategies (#9888)
* Add CoreDNS details to the customize DNS doc (#10228)
* Add CoreDNS details to the customize DNS doc
Rewrite the document to include more details about CoreDNS, since it's now the default from v1.12
* Address comments
* Improve doc wording
* Fix link
* Update dns-custom-nameservers.md
* Update dns-custom-nameservers.md
* Fix secrets docs in 1.12 branch (#10056)
* Fix secrets docs
* Update secret.md
* Revert CoreDNS Docs (#10319)
* Revert "Add CoreDNS details to DNS Debug docs (#10201)"
This reverts commit 462817a674.
* Revert "Add CoreDNS details to the customize DNS doc (#10228)"
This reverts commit e7319eeb8c.
* Revert "coredns default (#10200)"
This reverts commit 698e93b441.
* Add CRI installation instructions page
Added cri-installation page with CRI installation instructions
Referenced it from kubeadm-init and install-kubeadm pages.
* kubeadm: update API types documentation for 1.12 (#10283)
v1alpha2 -> v1alpha3
MasterConfiguration -> [new-api-types]
* TokenRequest feature documentation (#10295)
* AdvancedAuditing is now GA (#10156)
xref: kubernetes/kubernetes#65862
`AdvancedAuditing` feature is GA in 1.12. This PR adjusts the related
docs.
* update runtime-class.md (#10332)
* update runtime-class.md
* Update runtime-class.md
* Document cross-authorizer permissions for creating RBAC roles (#10015)
* Document cross-authorizer permissions for creating RBAC roles
* Update rbac.md
* kubeadm: update authored content for 1.12 (reference docs and cluster creation) (#10348)
* kubeadm: update authored content in reference docs for 1.12
* kubeadm: add time frame in create-cluster-kubeadm for 1.12
* add AllowedProcMountTypes and ProcMountType to docs (#9911)
Signed-off-by: Jess Frazelle <acidburn@microsoft.com>
* kubeadm: add new command line reference (#10306)
Add:
- placeholder files
- include place holder files
- include "renew" sub command
- add missing tabs for "alpha phase kubelet"
* Documenting SCTP support in Kubernetes (#10279)
* Documenting SCTP support in Kubernetes Service, Endpoint, NetworkPolicy and Pod
* Updates based on comments on the PR
* kubectl expose update with SCTP support
* Updated according to comments in the PR
* Revert "kubectl expose update with SCTP support"
This reverts commit 0d5a1e6720.
* TLS Bootstrap and Server Cert Rotation feature documentation (#10232)
* TokenRequest feature documentation
* line wrapping to make review not insane
* update content for GA without major refactor
* Update kubelet-tls-bootstrapping.md
* Add clarifications for volume snapshots (#10296)
* Update kubadm ha installation for 1.12 (#10264)
* Update kubadm ha installation for 1.12
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* update stable version
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* Update stacked control plane for v1.12 (#2)
* use v1alpha3
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* more v1alpha3 (#4)
* updates
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* Document how to run in-tree cloud providers with kubeadm (#10357)
Change-Id: Iab6b996a830503d74a6eb0c507c5f8ca7a39235b
* kubeadm reference doc for release 1.12 (#10359)
* Revert "Revert "Add CoreDNS details to DNS Debug docs (#10201)""
This reverts commit bb30f4d1fc.
* Revert "Revert "Add CoreDNS details to the customize DNS doc (#10228)""
This reverts commit bc23d45c09.
* Revert "Revert "coredns default (#10200)""
This reverts commit 7f4350d6ab.
* add missing instruction for ha guide (#10374)
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* kubeadm - Ha upgrade updates (#10340)
* Update HA upgrade docs
* Adds external etcd HA upgrade guide
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* copyedit
* more edits
* add runasgroup in psp (#10076)
* update KubeletPluginsWatcher feature gate (#10205)
* generated 1.12 docs
* Building Multi-arch images with Manifests (#10379)
In 1.12, a variety of images used in a typical kubernetes installation
have started to using manifests to better support environments with arm
or ppc64le architectures. For example all images used with kubeadm by
default have manifests, another would be all the tests in the
conformance test suite. Here we capture the best practices for everyone
to start using manifests in their own workflows.
Change-Id: I5ba4c5fe55ffc9486a8251760f3352be4f2e1494
* Upgrade docs for v1.12 (#10344)
* generated assets and docs
* remove 1.7
* update 1.12
* update plugin documentation under docs>tasks>extend-kubectl (#10259)
* update plugin documentation under docs>tasks>extend-kubectl
* Update kubectl-plugins.md
* Added content to Setup index
* Alphabetized providers
* Update _index.md
* Make Turnkey Cloud Solutions a H2 for toc
* Updated from Andrew's Comments
* fixing headings
* add new turnkey cloud solution to setup: ICP on
multiple clouds
Signed-off-by: Brad Topol <btopol@us.ibm.com>
* Updated ICP Multiple Cloud URL and IBM Cloud table entry
* small tweak to kick off redeploy
* Change product name
From IBM Cloud Container Service to IBM Cloud Kubernetes Service
* Adding IKS to the table of solutions
Not sure about where in the table it should be placed. The note said,
“The above table is ordered by version test/used in nodes, followed by
support level.”
* Adding IKS to Cloud Providers page
* Adding IBM Cloud Container Registry to private registry topic
* Updating language on cloud provider page
* Revising text for the registry entry
* Specifying that it's calico network policies
* Update high-availability.md
Fix for https://github.com/kubernetes/website/issues/9594#
Changed the value of `kubernetesVersion` to `v1.11.1` in the kubeadm-config.yaml so it pulls the correct server images for the latest v1.11 release.
I don't like the idea of having to change this value for every point release. Maybe someone can come up with a better solution that submitting a change to the documentation for every minor release?
* Update high-availability.md
* Changed Azure Container Service names and to Azure Kubernetes Service
* Changed docs link
* Service link redirects to aks link and remains unchanged.
* Propogating
not "Propogating", is "Propagating"
* `kubelet init` and `kubelet join`
`kubeadm init` and `kubeadm join`, not `kubelet init` and `kubelet join`
This patch fix content "List existing nodes, pods, services and more,
in all namespaces, or in just one:" lost pod list.
Signed-off-by: Yuanbin.Chen <cybing4@gmail.com>
* create-cluster-kubeadm: update notes about flannel
Add note that a specific manifest can be used to support
different architectures until version 0.11.0 is released.
* Fix passive voice
Style guide compliance
* Fix link order in Setup section
* fix merge conflict
* Co-authored-by: Jennifer Rondeau <jennifer.rondeau@gmail>
* flip front matter order
* Remove Imported section and add Community section
* revert flip
* change section weights
* revert case study change
* update kops version to latest (1.10.0)
added a more recent version of kops.
now also supports kubernetes 1.10.x
* more updates on the kops.md
- added links to markup files in the kops repo
- slack channel updated
* rebase certificates PR on Hugo master
Co-authored-by: liztio <liz@heptio.com>
* fix per comments, add note about front-proxy
* fix up key usage table and references
* kubeadm: Add a kubelet-kubeadm integration reference doc
* kubeadm: edits for the kubelet-kubeadm integration doc
* kubeadm: move the kubelet-kubeadm integration doc
* Apply edits to kubelet-integration.md
* Make kubelet-integration.md use a template
Also apply MD formatting fixes.
* Copyedit
* Address feedback on copyedit
* added a couple of typo fixes
* update admission-controller links
(cherry picked from commit 37043991a61e5e6f4ac1c463b14c65430b192553)
* updated links found using greedier regex
(cherry picked from commit 45c6d4cf7430245a3b4e81eae245000beea88841)
* correct link in cn/docs/admin/authorization/_index.md
* fix incorrect changes introduced in eac3619
* undo update of cn content
* fix link
* fix admission webhook link
This change is to list JuniperContrail/TungstenFabric as a provider
of Pod networking for a Kubernetes cluster.
Juniper's CNI solution has been available as a open source product
for couple of years now. It is a mature solution that has been
deployed in live clusters.
* Seperate priority and preemption (#8144)
* Doc about PID pressure condition. (#8211)
* Doc about PID pressure condition.
Signed-off-by: Da K. Ma <klaus1982.cn@gmail.com>
* "so" -> "too"
* Update version selector for 1.11
* StorageObjectInUseProtection is GA (#8291)
* Feature gate: StorageObjectInUseProtection is GA
Update feature gate reference for 1.11
* Trivial commit to re-trigger Netlify
* CRIContainerLogRotation is Beta in 1.11 (#8665)
* Seperate priority and preemption (#8144)
* CRIContainerLogRotation is Beta in 1.11
xref: kubernetes/kubernetes#64046
* Bring StorageObjectInUseProtection feature to GA (#8159)
* StorageObjectInUseProtection is GA (#8291)
* Feature gate: StorageObjectInUseProtection is GA
Update feature gate reference for 1.11
* Trivial commit to re-trigger Netlify
* Bring StorageObjectInUseProtection feature to GA
StorageObjectInUseProtection is Beta in K8s 1.10.
It's brought to GA in K8s 1.11.
* Fixed typo and added feature state tags.
* Remove KUBE_API_VERSIONS doc (#8292)
The support to the KUBER_API_VERSIONS environment variable is completely
dropped (no deprecation). This PR removes the related doc in
release-1.11.
xref: kubernetes/kubernetes#63165
* Remove InitialResources from admission controllers (#8293)
The feature (was experimental) is dropped in 1.11.
xref: kubernetes/kubernetes#58784
* Remove docs related to in-tree support to GPU (#8294)
* Remove docs related to in-tree support to GPU
The in-tree support to GPU is completely removed in release 1.11.
This PR removes the related docs in release-1.11 branch.
xref: kubernetes/kubernetes#61498
* Update content updated by PR to Hugo syntax
Signed-off-by: Misty Stanley-Jones <mistyhacks@google.com>
* Update the doc about extra volume in kubeadm config (#8453)
Signed-off-by: Xianglin Gao <xianglin.gxl@alibaba-inc.com>
* Update CRD Subresources for 1.11 (#8519)
* coredns: update notes in administer-cluster/coredns.md (#8697)
CoreDNS is installed by default in 1.11.
Add notes on how to install kube-dns instead.
Update notes about CoreDNS->CoreDNS upgrades as in 1.11
the Corefile is retained.
Add example on upgrading from kube-dns to CoreDNS.
* kubeadm-alpha: CoreDNS related changes (#8727)
Update note about CoreDNS feature gate.
This change also updates a tab as a kubeadm sub-command
will change.
It looks for a new generated file:
generated/kubeadm_alpha_phase_addon_coredns.md
instead of:
generated/kubeadm_alpha_phase_addon_kube-dns.md
* Update cloud controller manager docs to beta 1.11 (#8756)
* Update cloud controller manager docs to beta 1.11
* Use Hugo shortcode for feature state
* kubeadm-upgrade: include new command `kubeadm upgrade diff` (#8617)
Also:
- Include note that this was added in 1.11.
- Modify the note about upgrade guidance.
* independent: update CoreDNS mentions for kubeadm (#8753)
Give CoreDNS instead of kube-dns examples in:
- docs/setup/independent/create-cluster-kubeadm.md
- docs/setup/independent/troubleshooting-kubeadm.md
* update 1.11 --server-print info (#8870)
* update 1.11 --server-print info
* Copyedit
* Mark ExpandPersistentVolumes feature to beta (#8778)
* Update version selector for 1.11
* Mark ExpandPersistentVolumes Beta
xref: kubernetes/kubernetes#64288
* fix shortcode, add placeholder files to fix deploy failures (#8874)
* declare ipvs ga (#8850)
* kubeadm: update info about CoreDNS in kubeadm-init.md (#8728)
Add info to install kube-dns instead of CoreDNS, as CoreDNS
is the default DNS server in 1.11.
Add notes that kubeadm config images can be used to list and pull
the required images in 1.11.
* kubeadm: update implementation-details.md about CoreDNS (#8829)
- Replace examples from kube-dns to CoreDNS
- Add notes about the CoreDNS feature gate status in 1.11
- Add note that the service name for CoreDNS is also
called `kube-dns`
* Update block device support for 1.11 (#8895)
* Update block device support for 1.11
* Copyedits
* Fix typo 'fiber channel' (#8957)
Signed-off-by: Misty Stanley-Jones <mistyhacks@google.com>
* kubeadm-upgrade: add the 'node [config]' sub-command (#8960)
- Add includes for the generated pages
- Include placeholder generated pages
* kubeadm-init: update the example for the MasterConfiguration (#8958)
- include godocs link for MasterConfiguration
- include example MasterConfiguration
- add note that `kubeadm config print-default` can be used
* kubeadm-config: include new commands (#8862)
Add notes and includes for these new commands in 1.11:
- kubeadm config print-default
- kubeadm config migrate
- kubeadm config images list
- kubeadm config images pull
Include placeholder generated files for the above.
* administer-cluster/coredns: include more changes (#8985)
It was requested that for this page a couple of methods
should be outlined:
- manual installation for CoreDNS explained at the Kubernetes
section of the GitHub project for CoreDNS
- installation and upgrade via kubeadm
Make the above changes and also add a section "About CoreDNS".
This commit also lowercases a section title.
* Update CRD subresources doc for 1.11 (#8918)
* Add docs for volume expansion and online resizing (#8896)
* Add docs for volume expansion going beta
* Copyedit
* Address feedback
* Update exec plugin docs with TLS credentials (#8826)
* Update exec plugin docs with TLS credentials
kubernetes/kubernetes#61803 implements TLS client credential support for
1.11.
* Copyedit
* More copyedits for clarification
* Additional copyedit
* Change token->credential
* NodeRestriction admission prevents kubelet taint removal (#8911)
* dns-custom-namerserver: break down the page into mutliple sections (#8900)
* dns-custom-namerserver: break down the page into mutliple sections
This page is currently about kube-dns and is a bit outdated.
Introduce the heading `# Customizing kube-dns`.
Introduce a separate section about CoreDNS.
* Copyedits, fix headings for customizing DNS
Hey Lubomir,
I coypedited pretty heavily because this workflow is so much easier for docs and because I'm trying to help improve everything touching kubeadm as much as possible.
But there's one outstanding issue wrt headings and intro content: you can't add a heading 1 to a topic to do what you wanted to do. The page title in the front matter is rendered as a heading 1 and everything else has to start at heading 2. (We still need to doc this better in the docs contributing content, I know.)
Instead, I think we need to rewrite the top-of-page intro content to explain better the relationship between kube-dns and CoreDNS. I'm happy to write something, but I thought I'd push this commit first so you can see what I'm doing.
Hope it's all clear -- ping here or on Slack with any questions ~ Jennifer
* Interim fix for talking about CoreDNS
* Fix CoreDNS details
* PSP readOnly hostPath (#8898)
* Add documentation for crictl (#8880)
* Add documentation for crictl
* Copyedit
Signed-off-by: Misty Stanley-Jones <mistyhacks@google.com>
* Final copyedit
* VolumeSubpathEnvExpansion alpha feature (#8835)
* Note that Heapster is deprecated (#8827)
* Note that Heapster is deprecated
This notes that Heapster is deprecated, and migrates the relevant
docs to talk about metrics-server or other solutions by default.
* Copyedits and improvements
Signed-off-by: Misty Stanley-Jones <mistyhacks@google.com>
* Address feedback
* fix shortcode to troubleshoot deploy (#9057)
* update dynamic kubelet config docs for v1.11 (#8766)
* update dynamic kubelet config docs for v1.11
* Substantial copyedit
* Address feedback
* Reference doc for kubeadm (release-1.11) (#9044)
* Reference doc for kubeadm (release-1.11)
* fix shortcode to troubleshoot deploy (#9057)
* Reference doc for kube-components (release-1.11) (#9045)
* Reference doc for kube-components (release-1.11)
* Update cloud-controller-manager.md
* fix shortcode to troubleshoot deploy (#9057)
* Documentation on lowercasing kubeadm init apiserver SANs (#9059)
* Documentation on lowercasing kubeadm init apiserver SANs
* fix shortcode to troubleshoot deploy (#9057)
* Clarification in dynamic Kubelet config doc (#9061)
* Promote sysctls to Beta (#8804)
* Promote sysctls to Beta
* Copyedits
Signed-off-by: Misty Stanley-Jones <mistyhacks@google.com>
* Review comments
* Address feedback
* More feedback
* kubectl reference docs for 1.11 (#9080)
* Update Kubernetes API 1.11 ref docs (#8977)
* Update v1alpha1 to v1beta1.
* Adjust left nav for 1.11 ref docs.
* Trim list of old ref docs.
* Update Federation API ref docs for 1.11. (#9064)
* Update Federation API ref docs for 1.11.
* Add titles.
* Update definitions.html
* CRD versioning Public Documentation (#8834)
* CRD versioning Public Documentation
* Copyedit
Signed-off-by: Misty Stanley-Jones <mistyhacks@google.com>
* Address feedback
* More rewrites
* Address feedback
* Update main CRD page in light of versioning
* Reorg CRD docs
* Further reorg
* Tweak title
* CSI documentation update for raw block volume support (#8927)
* CSI documetation update for raw block volume support
* minor edits for "CSI raw block volume support"
Some small grammar and style nits.
* minor CSIBlockVolume edits
* Update kubectl component ref page for 1.11. (#9094)
* Update kubectl component ref page for 1.11.
* Add title. Replace stevepe with username.
* crd versioning doc: fix nits (#9142)
* Update `DynamicKubeletConfig` feature to beta (#9110)
xref: kubernetes/kubernetes#64275
* Documentation for dynamic volume limits based on node type (#8871)
* add cos for storage limits
* Update docs specific for aws and gce
* fix some minor things
* Update storage-limits.md
* Add k8s version to feature-state shortcode
* The Doc update for ScheduleDaemonSetPods (#8842)
Signed-off-by: Da K. Ma <klaus1982.cn@gmail.com>
* Update docs related to PersistentVolumeLabel admission control (#9109)
The said admission controller is disabled by default in 1.11
(kubernetes/kubernetes#64326) and scheduled to be removed in future
release.
* client exec auth: updates for 1.11 (#9154)
* Updates HA kubeadm docs (#9066)
* Updates HA kubeadm docs
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* kubeadm HA - Add stacked control plane steps
* ssh instructions and some typos in the bash scripts
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* Fix typos and copypasta errors
* Fix rebase issues
* Integrate more changes
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* copyedits, layout and formatting fixes
* final copyedits
* Adds a sanity check for load balancer connection
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* formatting fixes, copyedits
* fix typos, formatting
* Document the Pod Ready++ feature (#9180)
Closes: #9107
Xref: kubernetes/kubernetes#64057
* Mention 'KubeletPluginsWatcher' feature (#9177)
* Mention 'KubeletPluginsWatcher' feature
This feature is more developers oriented than users oriented, so simply
mention it in the feature gate should be fine.
In future, when the design doc is migrated from Google doc to the
kubernetes/community repo, we can add links to it for users who want to
dig deeper.
Closes: #9108
Xref: kubernetes/kubernetes#63328, kubernetes/kubernetes#64605
* Copyedit
* Amend dynamic volume list docs (#9181)
The dynamic volume list feature has been documented but the feature gate
related was not there yet.
Closes: #9105
* Document for service account projection (#9182)
This adds docs for the service account projection feature.
Xref: kubernetes/kubernetes#63819, kubernetes/community#1973Closes: #9102
* Update pod priority and preemption user docs (#9172)
* Update pod priority and preemption user docs
* Copyedit
* Documentation on setting node name with Kubeadm (#8925)
* Documentation on setting node name with Kubeadm
* copyedit
* Add kubeadm upgrade docs for 1.11 (#9089)
* Add kubeadm upgrade docs for 1.11
* Initial docs review feedback
* Add 1-11 to outline
* Fix formatting on tab blocks
* Move file to correct location
* Add `kubeadm upgrade node config` step
* Overzealous ediffing
* copyedit, fix lists and headings
* clarify --force flag for fixing bad state
* Get TOML ready for 1.11 release
* Blog post for 1.11 release (#9254)
* Blog post for 1.11 release
* Update 2018-06-26-kubernetes-1.11-release-announcement.md
* Update 2018-06-26-kubernetes-1.11-release-announcement.md
* Update 2018-06-26-kubernetes-1.11-release-announcement.md
Changes that will help upcoming consolidation work:
- Add variable `githubWebsiteRaw` to config.toml to facilitate building
links to raw YAML files
- Revise `codenew` shortcode to generate links to raw YAML files instead
of github.com file view;
- Rename `artifacts` directory to `examples` to better reflect its usage;
Accompanied changes as show cases:
- Moved `deployment.yaml`, `deployment-update.yaml` and
`deployment-scale.yaml` to the new `examples/application` subdirectory;
- Removed duplicate instances of the above YAML files in other
directories;
- Update example_test.go to test the relocated YAML files and removed
testing for files that no longer needed.
This page adds instructions on how to use the kubeadm config
to pass flags to control plane components.
The provided examples are pretty basic. Later this can be expanded with
actual user stories.
This heading is missing in the 1.10 documentations which makes it hard to find the needed information because the anchor `setting up a master load balancer` points to nowhere. This was working in the 1.19 documentation and it was really useful.
* Update etcd config description of kubeadm HA doc
- Fix url from http to https
- Add etcd-listen-ip description
* Edit for clarity and list markup
* More minor edits
`base64` generates 76-character chunks of text, delimited by a space character. the `=+/` characters are removed, so on the (uniformly random) offchance that 44 characters are removed, the last `dd` will read a whitespace, and the token will include a whitespace, which "usually" isn't defined as an "alphanumeric character." Removing the space character as well, would mean that 142 of the characters would have to be a `=+/[:space:]`, before the token becomes shorter.
Cannot copy any apiserver* keys and certs, as they are generated on startup. If not, it results in an error from kubeadm
```
certificate apiserver is not signed by corresponding CA
```
* Overall cleanup for kubeadm setup guide.
* Add sonobuoy verification next step
* Partial copyedits
Hit a place where we also have formatting issues, plus a TODO (removed bc these changes go live as soon as merged). More work to do, but this should help the bottleneck for now.
* Address comments from reviewers
* Copy edits, fiddly bits, and clearer warnings
Incorporated feedback from @mistyhacks, fixed many nits, reorganized some **Note:** content more sensibly.
* Revised title per feedback
Added information to install cfssl and cfssljson on all etc nodes as they are required to generate clients certificates
Change <podname> to <name> in static pod yaml description for etcd deployment
Additionaly the first bash script in "Run kubeadm init on master0" section doesn't render correctly on kubernetes.io site (https://kubernetes.io/docs/setup/independent/high-availability/) but I don't see any pb with markdown.
* Issue #8493 - Missing instructions in "Creating HA clusters with kubeadm":
- change to kubeadm-init.yaml: configure `advertiseAddress` to the VIP
- added section with instructions for configuring `kubelet`, `kube-controller-manager` and `kube-scheduler` to use the VIP
* Issue #8493 - Missing instructions in "Creating HA clusters with kubeadm": Change use the 'controlPlaneEndpoint' setting in kubeadm-init.yaml, hence no configuration file patching afterwards is necessary anymore.
* Issue #8493 - added private IP to apiServerCertSANs as proposed by @detiber
Fix some hugo transition issues:
* Use `file` as code syntax following our style guide and fixing
bug #8868
* Reformat Note so that it's not displayed as text.
Closes: #8868
* Update high-availability.md
[fix]command should leading
* Repair code inside list items, remove "like so"
* Modify one code block, change 1-step procedures to not be procedures
* Fix etcd installation command in kubeadm tutorial
Shells interpolate variables before running commands, so setting the
ETCD_VERSION variable must be separated from the command that
interpolates it. Otherwise an empty string will be interpolated.
The rm command isn't necessary - the output from curl is piped directly
to tar.
* Update stated default etcd version for K8s 1.10
1.10 is the most recent version of K8s and the default etcd server
version for it is 3.1.12
* Fix non-US English typo
Style guide states US English should be used
* Fix url to etcd binary
etcd should be 3.12 for kubernetes 1.10, also fix the URL (probably was broken after migration to Hugo)
* Make Curl command safer
You really only need that variable to be set for the specific command, so no need to export it.
Also, when using Bash variables in a string, you should enclose them in curly braces to delineate them from the rest of the string. This helps prevent problems where Bash can't tell where the name of the variable ends and the next part of the string begins.
- Use environment variables when redirecting to "/etc/etcd.env".
- Add more placeholder values for flags in "etcd.service" -> "ExecStart"
Fixeskubernetes/kubeadm#797
First, fix https:// address.
Secondly, previous formatting would display on the page as one line
altogether, which couldn't be pasted into a terminal correctly.
Before running `kubeadm init` users should be informed that the command might change depending on the network plugins they choose. It is better to provide it before presenting with `kubeadm init` so that they don't have to tear the cluster apart once they figure out they needed some extra parameters while running the command
* Container Linux doc fixes
portions of the URLs were missing their bash substitutions and the variable exports don't apply to the following commands without using 'export'
* Adjustments from PR
export is not needed, used proper bash expansion
* typos
Miguel David
Tommy Hobin
António Meireles
atoato88
Stephan Fabel
LiuDui
JJ Asghar
Preston Holmes
Shen Yuanyu
Thomas Strömberg
Justin Clift
SataQiu
Rostislav M. Georgiev
Kevin Kelani
Chao Wang
PatMaz
Jim Angel
Cody Clark
Brad Topol
Tomáš Kukrál
Rong Zhang
Heng WU
Bob Killen
Sam Foo
CaoShuFeng
Maciej Kwiek
tanshanshan
Zach Corleissen
Duffie Cooley
Eric Tune
Art
Robert Bailey
Masahito Zembutsu
Diógenes Rettori
Paul
yan xuean
Lubomir I. Ivanov
ocofaigh
Dwai Banerjee
Kilian Ries
Li Zebang
makocchi
Yuanbin Chen
Andrew Chen
tvshc
Slava Semushin
Herrmann Hinz
Jennifer Rondeau
Igor Mameshin
MengZeLee
Chuck Ha
Ahmet Alp Balkan
chenhuan
Matt Rickard
Tobias Brunner
Xiao An
Xianglin Gao
Liz
Luc Perkins
Jari Kolehmainen
Kai Chen
Yujun Zhang
Oleg Atamanenko
Matheus Neder
spinside
Stewart-YU
Sudhakar Rayavaram
dineshb-jnpr
Timothy St. Clair
Misty Linville
Benjamin Priestman
Qiming
Mario Kleinsasser
Takeaki Matsumoto
Steve Perry
Nicolaj Græsholt
Guðlaugur Stefán Egilsson
max8899
Jason DeTiberus
mkoderer
Di Xu
Vincent Lainé
Martin Dietze
Tim Fogarty
Takuya Tokuda
Andreas Jaeger
Anubhav
Karthik Gaekwad
Loïc Albertin
Mark Janssen
lovejoy
Denis Gladkikh
nhanpc
Chris Hiestand
Daniel Galvez
Nate Bhurinat Wangsutthitham
Daniel Rodriguez
will-chan
Bjørn Erik Pedersen