website/docs/user-guide/images.md

---
---

Each container in a pod has its own image.  Currently, the only type of image supported is a [Docker Image](https://docs.docker.com/userguide/dockerimages/).

You create your Docker image and push it to a registry before referring to it in a Kubernetes pod.

The `image` property of a container supports the same syntax as the `docker` command does, including private registries and tags.

* TOC
{:toc}


## Updating Images

The default pull policy is `IfNotPresent` which causes the Kubelet to not
pull an image if it already exists. If you would like to always force a pull
you must set a pull image policy of `Always` or specify a `:latest` tag on
your image.

If you did not specify tag of your image, it will be assumed as `:latest`, with
pull image policy of `Always` correspondingly.

## Using a Private Registry

Private registries may require keys to read images from them.
Credentials can be provided in several ways:

  - Using Google Container Registry
    - Per-cluster
    - automatically configured on Google Compute Engine or Google Container Engine
    - all pods can read the project's private registry
  - Configuring Nodes to Authenticate to a Private Registry
    - all pods can read any configured private registries
    - requires node configuration by cluster administrator
  - Pre-pulling Images
    - all pods can use any images cached on a node
    - requires root access to all nodes to setup
  - Specifying ImagePullSecrets on a Pod
    - only pods which provide own keys can access the private registry
Each option is described in more detail below.


### Using Google Container Registry

Kubernetes has native support for the [Google Container
Registry (GCR)](https://cloud.google.com/tools/container-registry/), when running on Google Compute
Engine (GCE).  If you are running your cluster on GCE or Google Container Engine (GKE), simply
use the full image name (e.g. gcr.io/my_project/image:tag).

All pods in a cluster will have read access to images in this registry.

The kubelet will authenticate to GCR using the instance's
Google service account.  The service account on the instance
will have a `https://www.googleapis.com/auth/devstorage.read_only`,
so it can pull from the project's GCR, but not push.

### Using AWS EC2 Container Registry

Kubernetes has native support for the [AWS EC2 Container
Registry](https://aws.amazon.com/ecr/), when nodes are AWS instances.

Simply use the full image name (e.g. `ACCOUNT.dkr.ecr.REGION.amazonaws.com/imagename:tag`)
in the Pod definition.

All users of the cluster who can create pods will be able to run pods that use any of the
images in the ECR registry.

The kubelet will fetch and periodically refresh ECR credentials.  It needs the
`ecr:GetAuthorizationToken` permission to do this.


### Configuring Nodes to Authenticate to a Private Repository

**Note:** if you are running on Google Container Engine (GKE), there will already be a `.dockercfg` on each node
with credentials for Google Container Registry.  You cannot use this approach.

**Note:** this approach is suitable if you can control node configuration.  It
will not work reliably on GCE, and any other cloud provider that does automatic
node replacement.

Docker stores keys for private registries in the `$HOME/.dockercfg` or `$HOME/.docker/config.json` file.  If you put this
in the `$HOME` of user `root` on a kubelet, then docker will use it.

Here are the recommended steps to configuring your nodes to use a private registry.  In this
example, run these on your desktop/laptop:

   1. run `docker login [server]` for each set of credentials you want to use.  This updates `$HOME/.docker/config.json`.
   1. view `$HOME/.docker/config.json` in an editor to ensure it contains just the credentials you want to use.
   1. get a list of your nodes, for example:
      - if you want the names: `nodes=$(kubectl get nodes -o jsonpath='{range.items[*].metadata}{.name} {end}')`
      - if you want to get the IPs: `nodes=$(kubectl get nodes -o jsonpath='{range .items[*].status.addresses[?(@.type=="ExternalIP")]}{.address} {end}')`
   1. copy your local `.docker/config.json` to the home directory of root on each node.
      - for example: `for n in $nodes; do scp ~/.docker/config.json root@$n:/root/.docker/config.json; done`

Verify by creating a pod that uses a private image, e.g.:

```yaml
$ cat <<EOF > /tmp/private-image-test-1.yaml
apiVersion: v1
kind: Pod
metadata:
  name: private-image-test-1
spec:
  containers:
    - name: uses-private-image
      image: $PRIVATE_IMAGE_NAME
      imagePullPolicy: Always
      command: [ "echo", "SUCCESS" ]
EOF
$ kubectl create -f /tmp/private-image-test-1.yaml
pods/private-image-test-1
$
```

If everything is working, then, after a few moments, you should see:

```shell
$ kubectl logs private-image-test-1
SUCCESS
```

If it failed, then you will see:

```shell
$ kubectl describe pods/private-image-test-1 | grep "Failed"
  Fri, 26 Jun 2015 15:36:13 -0700	Fri, 26 Jun 2015 15:39:13 -0700	19	{kubelet node-i2hq}	spec.containers{uses-private-image}	failed		Failed to pull image "user/privaterepo:v1": Error: image user/privaterepo:v1 not found
```


You must ensure all nodes in the cluster have the same `.docker/config.json`.  Otherwise, pods will run on
some nodes and fail to run on others.  For example, if you use node autoscaling, then each instance
template needs to include the `.docker/config.json` or mount a drive that contains it.

All pods will have read access to images in any private registry once private
registry keys are added to the `.docker/config.json`.

**This was tested with a private docker repository as of 26 June with Kubernetes version v0.19.3.
It should also work for a private registry such as quay.io, but that has not been tested.**

### Pre-pulling Images

**Note:** if you are running on Google Container Engine (GKE), there will already be a `.dockercfg` on each node
with credentials for Google Container Registry.  You cannot use this approach.

**Note:** this approach is suitable if you can control node configuration.  It
will not work reliably on GCE, and any other cloud provider that does automatic
node replacement.

Be default, the kubelet will try to pull each image from the specified registry.
However, if the `imagePullPolicy` property of the container is set to `IfNotPresent` or `Never`,
then a local image is used (preferentially or exclusively, respectively).

If you want to rely on pre-pulled images as a substitute for registry authentication,
you must ensure all nodes in the cluster have the same pre-pulled images.

This can be used to preload certain images for speed or as an alternative to authenticating to a private registry.

All pods will have read access to any pre-pulled images.

### Specifying ImagePullSecrets on a Pod

**Note:** This approach is currently the recommended approach for GKE, GCE, and any cloud-providers
where node creation is automated.

Kubernetes supports specifying registry keys on a pod.

#### Creating a Secret with a Docker Config

Run the following command, substituting the appropriate uppercase values:

```shell
$ kubectl create secret docker-registry myregistrykey --docker-server=DOCKER_REGISTRY_SERVER --docker-username=DOCKER_USER --docker-password=DOCKER_PASSWORD --docker-email=DOCKER_EMAIL
secret "myregistrykey" created.
```

If you need access to multiple registries, you can create one secret for each registry.
Kubelet will merge any `imagePullSecrets` into a single virtual `.docker/config.json`
when pulling images for your Pods.

Pods can only reference image pull secrets in their own namespace,
so this process needs to be done one time per namespace.

##### Bypassing kubectl create secrets

If for some reason you need multiple items in a single `.docker/config.json` or need
control not given by the above command, then you can [create a secret using
json or yaml](/docs/user-guide/secrets/#creating-a-secret-manually).

Be sure to:

- set the name of the data item to `.dockerconfigjson`
- base64 encode the docker file and paste that string, unbroken
  as the value for field `data[".dockerconfigjson"]`
- set `type` to `kubernetes.io/dockerconfigjson`

Example:

```yaml
apiVersion: v1
kind: Secret
metadata:
  name: myregistrykey
  namespace: awesomeapps
data:
  .dockerconfigjson: UmVhbGx5IHJlYWxseSByZWVlZWVlZWVlZWFhYWFhYWFhYWFhYWFhYWFhYWFhYWFhYWFhYWxsbGxsbGxsbGxsbGxsbGxsbGxsbGxsbGxsbGxsbGx5eXl5eXl5eXl5eXl5eXl5eXl5eSBsbGxsbGxsbGxsbGxsbG9vb29vb29vb29vb29vb29vb29vb29vb29vb25ubm5ubm5ubm5ubm5ubm5ubm5ubm5ubmdnZ2dnZ2dnZ2dnZ2dnZ2dnZ2cgYXV0aCBrZXlzCg==
type: kubernetes.io/dockerconfigjson
```

If you get the error message `error: no objects passed to create`, it may mean the base64 encoded string is invalid.
If you get an error message like `Secret "myregistrykey" is invalid: data[.dockerconfigjson]: invalid value ...` it means
the data was successfully un-base64 encoded, but could not be parsed as a `.docker/config.json` file.

#### Referring to an imagePullSecrets on a Pod

Now, you can create pods which reference that secret by adding an `imagePullSecrets`
section to a pod definition.

```yaml
apiVersion: v1
kind: Pod
metadata:
  name: foo
  namespace: awesomeapps
spec:
  containers:
    - name: foo
      image: janedoe/awesomeapp:v1
  imagePullSecrets:
    - name: myregistrykey
```

This needs to be done for each pod that is using a private registry.

However, setting of this field can be automated by setting the imagePullSecrets
in a [serviceAccount](/docs/user-guide/service-accounts) resource.

You can use this in conjunction with a per-node `.docker/config.json`.  The credentials
will be merged.  This approach will work on Google Container Engine (GKE).

### Use Cases

There are a number of solutions for configuring private registries.  Here are some
common use cases and suggested solutions.

1. Cluster running only non-proprietary (e.g open-source) images.  No need to hide images.
   - Use public images on the Docker hub.
     - no configuration required
     - on GCE/GKE, a local mirror is automatically used for improved speed and availability
1. Cluster running some proprietary images which should be hidden to those outside the company, but
   visible to all cluster users.
   - Use a hosted private [Docker registry](https://docs.docker.com/registry/)
     - may be hosted on the [Docker Hub](https://hub.docker.com/account/signup/), or elsewhere.
     - manually configure .docker/config.json on each node as described above
   - Or, run an internal private registry behind your firewall with open read access.
     - no Kubernetes configuration required
   - Or, when on GCE/GKE, use the project's Google Container Registry.
     - will work better with cluster autoscaling than manual node configuration
   - Or, on a cluster where changing the node configuration is inconvenient, use `imagePullSecrets`.
1. Cluster with a proprietary images, a few of which require stricter access control
   - ensure [AlwaysPullImages admission controller](/docs/admin/admission-controllers/#alwayspullimages) is active, otherwise, all Pods potentially have access to all images
   - Move sensitive data into a "Secret" resource, instead of packaging it in an image.
1. A multi-tenant cluster where each tenant needs own private registry
   - ensure [AlwaysPullImages admission controller](/docs/admin/admission-controllers/#alwayspullimages) is active, otherwise, all Pods of all tenants potentially have access to all images
   - run a private registry with authorization required.
   - generate registry credential for each tenant, put into secret, and populate secret to each tenant namespace.
   - tenant adds that secret to imagePullSecrets of each namespace.