Address review comments

docs/reusing_the_docker_daemon.md

@@ -16,13 +16,9 @@ You should now be able to use docker on the command line on your host mac/linux
 docker ps
 ```
 
-Docker may report following forbidden error if you are using http proxy and the `$(minikube ip)` is not added to `no_proxy`/`NO_PROXY`:
+### Troubleshooting
 
-```shell
-error during connect: Get https://192.168.39.98:2376/v1.39/containers/json: Forbidden
-```
-
-On Centos 7, docker may report the following error:
+On CentOS 7, Docker may report the following error:
 
 ```shell
 Could not read CA certificate "/etc/docker/ca.pem": open /etc/docker/ca.pem: no such file or directory

site/content/en/docs/Reference/Drivers/hyperkit.md

@@ -18,11 +18,11 @@ description: >
 minikube start supports additional hyperkit specific flags:
 
 
-* **\--hyperkit-vpnkit-sock**: Location of the VPNKit socket used for networking. If empty, disables Hyperkit VPNKitSock, if 'auto' uses Docker for Mac VPNKit connection, otherwise uses the specified VSoc
-* **\--hyperkit-vsock-ports**: List of guest VSock ports that should be exposed as sockets on the host
-* **\--nfs-share**: Local folders to share with Guest via NFS mounts
-* **\--nfs-shares-root**: Where to root the NFS Shares (default "/nfsshares")
-* **\--uuid**: Provide VM UUID to restore MAC address 
+* **`--hyperkit-vpnkit-sock`**: Location of the VPNKit socket used for networking. If empty, disables Hyperkit VPNKitSock, if 'auto' uses Docker for Mac VPNKit connection, otherwise uses the specified VSoc
+* **`--hyperkit-vsock-ports`**: List of guest VSock ports that should be exposed as sockets on the host
+* **`--nfs-share`**: Local folders to share with Guest via NFS mounts
+* **`--nfs-shares-root`**: Where to root the NFS Shares (default "/nfsshares")
+* **`--uuid`**: Provide VM UUID to restore MAC address 
 
 ## Issues
 

site/content/en/docs/Reference/Drivers/hyperv.md

@@ -18,7 +18,7 @@ Hyper-V is a native hypervisor built in to modern versions of Microsoft Windows.
 
 The `minikube start` command supports additional hyperv specific flags:
 
-* **\--hyperv-virtual-switch**: The hyperv virtual switch name. Defaults to first found
+* **`--hyperv-virtual-switch`**: The hyperv virtual switch name. Defaults to first found
 
 ## Issues
 

site/content/en/docs/Reference/Drivers/includes/hyperv_usage.md

@@ -2,9 +2,9 @@
 
 * Windows 10 Pro 
 * Hyper-V enabled
-* A Hyper-V switch created
+* An active Hyper-V switch
 
-## Configuring Hyper-V
+## Enabling Hyper-V
 
 Open a PowerShell console as Administrator, and run the following command:
 
@@ -12,13 +12,21 @@ Open a PowerShell console as Administrator, and run the following command:
 Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Hyper-V -All
 ```
 
-Reboot, and create a new external network switch:
+If Hyper-V was not previously active, you will need to reboot.
+
+## Network Configuration
+
+Create a Hyper-V external network switch  
+
+{{% alert title="Untested" color="warning" %}}
+This command is speculative, and may not work in all environments. You may need to use the Hyper-V Administrator UI for wireless interfaces.
+{{% /alert %}}
 
 ```powershell
-New-VMSwitch -name ExternalSwitch  -NetAdapterName Ethernet -AllowManagementOS $true 
+New-VMSwitch -name ExternalSwitch -NetAdapterName Ethernet -AllowManagementOS $true 
 ```
 
-Set this network switch as the minikube default:
+Set this switch as the minikube default:
 
 ```shell
 minikube config set hyperv-virtual-switch ExternalSwitch

site/content/en/docs/Reference/Drivers/includes/virtualbox_usage.md

@@ -1,6 +1,6 @@
 ## Requirements
 
-- [https://www.virtualbox.org/wiki/Downloads](VirtualBox) 5.2 or higher
+- [VirtualBox](https://www.virtualbox.org/wiki/Downloads) 5.2 or higher
 
 ## Usage
 

site/content/en/docs/Reference/Drivers/kvm2.md

@@ -18,13 +18,13 @@ description: >
 
 The `minikube start` command supports 3 additional kvm specific flags:
 
-* **\--gpu**: Enable experimental NVIDIA GPU support in minikube
-* **\--hidden**: Hide the hypervisor signature from the guest in minikube
-* **\--kvm-network**:  The KVM network name
+* **`--gpu`**: Enable experimental NVIDIA GPU support in minikube
+* **`--hidden`**: Hide the hypervisor signature from the guest in minikube
+* **`--kvm-network`**:  The KVM network name
 
 ## Issues
 
-* `minikube` will repeatedly for root password if user is not in the correct `libvirt` group [#3467](https://github.com/kubernetes/minikube/issues/3467)
+* `minikube` will repeatedly for the root password if user is not in the correct `libvirt` group [#3467](https://github.com/kubernetes/minikube/issues/3467)
 * `Machine didn't return an IP after 120 seconds` when firewall prevents VM network access [#3566](https://github.com/kubernetes/minikube/issues/3566)
 * `unable to set user and group to '65534:992` when `dynamic ownership = 1` in `qemu.conf` [#4467](https://github.com/kubernetes/minikube/issues/4467) 
 * KVM VM's cannot be used simultaneously with VirtualBox  [#4913](https://github.com/kubernetes/minikube/issues/4913)

site/content/en/docs/Reference/Drivers/virtualbox.md

@@ -17,8 +17,8 @@ VirtualBox is the oldest and most stable VM driver for minikube.
 
 minikube start supports some VirtualBox specific flags:
 
-* **\--host-only-cidr**: The CIDR to be used for the minikube VM (default "192.168.99.1/24")
-* **\--no-vtx-check**: Disable checking for the availability of hardware virtualization 
+* **`--host-only-cidr`**: The CIDR to be used for the minikube VM (default "192.168.99.1/24")
+* **`--no-vtx-check`**: Disable checking for the availability of hardware virtualization 
 
 ## Issues
 

site/content/en/docs/Tasks/loadbalancer.md

@@ -7,8 +7,11 @@ description: >
   How to access a LoadBalancer service in minikube
 ---
 
+## Overview
+
 A LoadBalancer service is the standard way to expose a service to the internet. With this method, each service gets it's own IP address.
 
+
 ## Using `minikube tunnel`
 
 Services of type `LoadBalancer` can be exposed via the `minikube tunnel` command. It will run until Ctrl-C is hit.
@@ -33,26 +36,23 @@ Status:
                 loadbalancer emulator: no errors
 ```
 
-Tunnel might ask you for password for creating and deleting network routes.
 
-### DNS resolution
+`minikube tunnel` runs as a separate daemon, creating a network route on the host to the service CIDR of the cluster using the cluster's IP address as a gateway.  The tunnel command exposes the external IP directly to any program running on the host operating system.
+
+### DNS resolution (experimental)
 
 If you are on macOS, the tunnel command also allows DNS resolution for Kubernetes services from the host.
 
 ### Cleaning up orphaned routes
 
-If the `minikube tunnel` shuts down in an unclean way, it might leave a network route around.
-This case the ~/.minikube/tunnels.json file will contain an entry for that tunnel.
-To cleanup orphaned routes, run:
+If the `minikube tunnel` shuts down in an abrupt manner, it may leave orphaned network routes on your system. If this happens, the ~/.minikube/tunnels.json file will contain an entry for that tunnel. To remove orphaned routes, run:
 
 ````shell
 minikube tunnel --cleanup
 ````
 
-### Avoid entering password multiple times
+### Avoiding password prompts
 
-`minikube tunnel` runs as a separate daemon, creates a network route on the host to the service CIDR of the cluster using the cluster's IP address as a gateway. Adding a route requires root privileges for the user, and thus there are differences in how to run `minikube tunnel` depending on the OS.
-
-If you want to avoid entering the root password, consider setting NOPASSWD for "ip" and "route" commands:
+Adding a route requires root privileges for the user, and thus there are differences in how to run `minikube tunnel` depending on the OS. If you want to avoid entering the root password, consider setting NOPASSWD for "ip" and "route" commands:
 
 <https://superuser.com/questions/1328452/sudoers-nopasswd-for-single-executable-but-allowing-others>

site/content/en/docs/Tutorials/continuous_integration.md

@@ -41,4 +41,3 @@ touch $KUBECONFIG
 sudo -E minikube start --vm-driver=none
 ```
 
-## Troubleshooting