diff --git a/scripts/ZoneMinder/lib/ZoneMinder/Control/FI9831W.pm b/scripts/ZoneMinder/lib/ZoneMinder/Control/FI9831W.pm
new file mode 100644
index 000000000..ca9cf6b68
--- /dev/null
+++ b/scripts/ZoneMinder/lib/ZoneMinder/Control/FI9831W.pm
@@ -0,0 +1,762 @@
+# Modified by PP to clean up user/auth dependencies inside the script
+# Also, you can specify your auth credentials in the Control tab of the monitor
+# In "ControlDevice" put in
+# usr=xxxx&pwd=xxx
+# where xxx is the auth credentials to your foscam camera
+# The Foscam CGI manual referred to was v1.0.10
+# All other notices below may be stale
+#
+# ==========================================================================
+#
+# ZoneMinder FOSCAM version 1.0 API Control Protocol Module, $Date$, $Revision$
+# Copyright (C) 2001-2008 Philip Coombes
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# =========================================================================================
+#
+# This module FI8620_Y2k.pm contains the implementation of API camera control
+# For FOSCAM FI8620 Dome PTZ Camera (This cam support only H264 streaming)
+# V1.0 Le 09 AOUT 2013 - production usable for the script but not for the camera "reboot itself"
+# If you wan't to contact me i understand French and English, precise ZoneMinder in subject
+# My name is Christophe DAPREMONT my email is christophe_y2k@yahoo.fr
+#
+# =========================================================================================
+#
+package ZoneMinder::Control::FI9831W;
+
+use 5.006;
+use strict;
+use warnings;
+
+require ZoneMinder::Base;
+require ZoneMinder::Control;
+
+our @ISA = qw(ZoneMinder::Control);
+# ===================================================================================================================================
+#
+# FI9821 FOSCAM PT H264 Control Protocol
+# with Firmware version V1.2.1.1 (latest at 09/08/2013)
+# based with the latest buggy CGI doc from FOSCAM ( http://foscam.us/forum/cgi-sdk-for-hd-camera-t6045.html )
+# This IPCAM work under ZoneMinder V1.25 from alternative source of code
+# from this svn at https://svn.unixmedia.net/public/zum/trunk/zum/
+# Many Thanks to "MASTERTHEKNIFE" for the excellent speed optimisation ( http://www.zoneminder.com/forums/viewtopic.php?f=9&t=17652 )
+# And to "NEXTIME" for the recent source update and incredible plugins ( http://www.zoneminder.com/forums/viewtopic.php?f=9&t=20587 )
+# And all people helping ZoneMinder dev.
+#
+# -FUNCTION: display on OSD
+# speed is progressive in function of where you click on arrow ========>
+# speed low=/ \=speed high
+# ===================================================================================================================================
+use ZoneMinder::Logger qw(:all);
+use ZoneMinder::Config qw(:all);
+use Time::HiRes qw( usleep );
+
+# Set $osd to "off" if you wan't disabled OSD i need to place this variable in another script because
+# this script is reload at every command ,if i want the button on/off (Focus MAN) for OSD works...
+# PP - changed this to off - it achieves OSD by renaming the Device and what happens is at times
+# it does not reset the name if a command fails. Net result: Your camera gets a name like "Move Left" which
+# I bet you won't like
+my $osd = "off";
+
+sub new
+{
+ my $class = shift;
+ my $id = shift;
+ my $self = ZoneMinder::Control->new( $id );
+ bless( $self, $class );
+ srand( time() );
+ return $self;
+}
+
+our $AUTOLOAD;
+
+sub AUTOLOAD
+{
+ my $self = shift;
+ my $class = ref($self) || croak( "$self not object" );
+ my $name = $AUTOLOAD;
+ $name =~ s/.*://;
+ if ( exists($self->{$name}) )
+ {
+ return( $self->{$name} );
+ }
+ Fatal( "Can't access $name member of object of class $class" );
+}
+
+sub open
+{
+ my $self = shift;
+ $self->loadMonitor();
+ use LWP::UserAgent;
+ $self->{ua} = LWP::UserAgent->new;
+ #PP
+ #$self->{ua}->agent( "ZoneMinder Control Agent/".ZoneMinder::Base::ZM_VERSION );
+ $self->{ua}->agent( "ZoneMinder Control Agent/" );
+ $self->{state} = 'open';
+}
+
+sub close
+{
+ my $self = shift;
+ $self->{state} = 'closed';
+}
+
+sub printMsg
+{
+ my $self = shift;
+ my $msg = shift;
+ my $msg_len = length($msg);
+ Debug( $msg."[".$msg_len."]" );
+}
+
+sub sendCmd
+{
+ my $self = shift;
+ my $cmd = shift;
+ my $result = undef;
+ printMsg( $cmd, "Tx" );
+ my $temps = time();
+ #PP - cleaned this up so it picks up the full auth from Control Devices
+ my $req = HTTP::Request->new( GET=>"http://".$self->{Monitor}->{ControlAddress}."/cgi-bin/CGIProxy.fcgi?cmd=".$cmd."&".$self->{Monitor}->{ControlDevice} );
+ #my $req = HTTP::Request->new( GET=>"http://".$self->{Monitor}->{ControlAddress}."/cgi-bin/CGIProxy.fcgi?usr%3Dadmin%26pwd%3D".$self->{Monitor}->{ControlDevice}."%26cmd%3D".$cmd."%26".$temps );
+ my $res = $self->{ua}->request($req);
+ if ( $res->is_success )
+ {
+ $result = !undef;
+ }
+ else
+ {
+ Error( "Error check failed: '".$res->status_line()."'" );
+ }
+ return( $result );
+}
+
+# PP - changed this to a system reboot. Its harmful to reset here. Settings may change
+# with different firmware versions. Better to make this a reboot and use the camera
+# interface to reset streams
+sub reset
+{ my $self = shift;
+ Debug ( "Reboot= setup camera FoscamHD" );
+ $cmd = "rebootSystem";
+ #my $cmd = "setOSDSetting%26isEnableTimeStamp%3D0%26isEnableDevName%3D1%26dispPos%3D0%26isEnabledOSDMask%3D0";
+ Info ("Sending reboot $cmd");
+ $self->sendCmd( $cmd );
+ # Setup For Stream=0 Resolution=720p Bandwith=4M FPS=30 KeyFrameInterval/GOP=100 VBR=ON
+ #$cmd = "setVideoStreamParam%26streamType%3D0%26resolution%3D0%26bitRate%3D4194304%26frameRate%3D30%26GOP%3D100%26isVBR%3D1";
+ #$self->sendCmd( $cmd );
+ # Setup For Infrared AUTO
+ #$cmd = "setInfraLedConfig%26Mode%3D1";
+ #$self->sendCmd( $cmd );
+ # Reset image settings
+ #$cmd = "resetImageSetting";
+ #$self->sendCmd( $cmd );
+}
+
+sub moveStop
+{
+ my $self = shift;
+ Debug( "Move Stop" );
+ my $cmd = "ptzStopRun";
+ $self->sendCmd( $cmd );
+ if ($osd eq "on")
+ {
+ $cmd = "setDevName%26devName%3D.";
+ $self->sendCmd( $cmd );
+ $cmd = "setOSDSetting%26isEnableDevName%3D1";
+ $self->sendCmd( $cmd );
+ }
+}
+
+sub autoStop
+{
+ my $self = shift;
+ my $autostop = shift;
+ if( $autostop )
+ {
+ Debug( "Auto Stop" );
+ usleep( $autostop );
+ my $cmd = "ptzStopRun";
+ $self->sendCmd( $cmd );
+ }
+}
+
+sub moveConUp
+{
+ my $self = shift;
+ my $params = shift;
+ my $tiltspeed = $self->getParam( $params, 'tiltspeed' );
+ # speed inverter 4-->0 , 3-->1 , 2-->2 , 1-->3 , 0-->4
+ $tiltspeed = abs($tiltspeed - 4);
+ # Normalisation en cas de valeur erronée dans la base de données
+ if ( $tiltspeed > 4 ) {
+ $tiltspeed = 4;
+ }
+ if ( $tiltspeed < 0 ) {
+ $tiltspeed = 0;
+ }
+ Debug( "Move Up" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DMove Up $tiltspeed";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setPTZSpeed%26speed%3D$tiltspeed";
+ $self->sendCmd( $cmd );
+ $cmd = "ptzMoveUp";
+ $self->sendCmd( $cmd );
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub moveConDown
+{
+ my $self = shift;
+ my $params = shift;
+ my $tiltspeed = $self->getParam( $params, 'tiltspeed' );
+ # speed inverter 4-->0 , 3-->1 , 2-->2 , 1-->3 , 0-->4
+ $tiltspeed = abs($tiltspeed - 4);
+ # Normalization
+ if ( $tiltspeed > 4 ) {
+ $tiltspeed = 4;
+ }
+ if ( $tiltspeed < 0 ) {
+ $tiltspeed = 0;
+ }
+ Debug( "Move Down" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DMove Down $tiltspeed";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setPTZSpeed%26speed%3D$tiltspeed";
+ $self->sendCmd( $cmd );
+ $cmd = "ptzMoveDown";
+ $self->sendCmd( $cmd );
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub moveConLeft
+{
+ my $self = shift;
+ my $params = shift;
+ my $panspeed = $self->getParam( $params, 'panspeed' );
+ # Normalisation en cas de valeur erronée dans la base de données
+ if ( $panspeed > 4 ) {
+ $panspeed = 4;
+ }
+ if ( $panspeed < 0 ) {
+ $panspeed = 0;
+ }
+ Debug( "Move Left" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DMove Left $panspeed";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setPTZSpeed%26speed%3D$panspeed";
+ $self->sendCmd( $cmd );
+ $cmd = "ptzMoveLeft";
+ $self->sendCmd( $cmd );
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+
+sub moveConRight
+{
+ my $self = shift;
+ my $params = shift;
+ my $panspeed = $self->getParam( $params, 'panspeed' );
+ # speed inverter 4-->0 , 3-->1 , 2-->2 , 1-->3 , 0-->4
+ $panspeed = abs($panspeed - 4);
+ # Normalisation en cas de valeur erronée dans la base de données
+ if ( $panspeed > 4 ) {
+ $panspeed = 4;
+ }
+ if ( $panspeed < 0 ) {
+ $panspeed = 0;
+ }
+ Debug( "Move Right" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DMove Right $panspeed";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setPTZSpeed%26speed%3D$panspeed";
+ $self->sendCmd( $cmd );
+ $cmd = "ptzMoveRight";
+ $self->sendCmd( $cmd );
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub moveConUpLeft
+{
+ my $self = shift;
+ my $params = shift;
+ my $tiltspeed = $self->getParam( $params, 'tiltspeed' );
+ # speed inverter 4-->0 , 3-->1 , 2-->2 , 1-->3 , 0-->4
+ $tiltspeed = abs($tiltspeed - 4);
+ # Normalisation en cas de valeur erronée dans la base de données
+ if ( $tiltspeed > 4 ) {
+ $tiltspeed = 4;
+ }
+ if ( $tiltspeed < 0 ) {
+ $tiltspeed = 0;
+ }
+ Debug( "Move Con Up Left" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DMove Up Left $tiltspeed";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setPTZSpeed%26speed%3D$tiltspeed";
+ $self->sendCmd( $cmd );
+ $cmd = "ptzMoveTopLeft";
+ $self->sendCmd( $cmd );
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub moveConUpRight
+{
+ my $self = shift;
+ my $params = shift;
+ my $tiltspeed = $self->getParam( $params, 'tiltspeed' );
+ # speed inverter 4-->0 , 3-->1 , 2-->2 , 1-->3 , 0-->4
+ $tiltspeed = abs($tiltspeed - 4);
+ # Normalisation en cas de valeur erronée dans la base de données
+ if ( $tiltspeed > 4 ) {
+ $tiltspeed = 4;
+ }
+ if ( $tiltspeed < 0 ) {
+ $tiltspeed = 0;
+ }
+ Debug( "Move Con Up Right" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DMove Up Right $tiltspeed";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setPTZSpeed%26speed%3D$tiltspeed";
+ $self->sendCmd( $cmd );
+ $cmd = "ptzMoveTopRight";
+ $self->sendCmd( $cmd );
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub moveConDownLeft
+{
+ my $self = shift;
+ my $params = shift;
+ my $tiltspeed = $self->getParam( $params, 'tiltspeed' );
+ # speed inverter 4-->0 , 3-->1 , 2-->2 , 1-->3 , 0-->4
+ $tiltspeed = abs($tiltspeed - 4);
+ # Normalisation en cas de valeur erronée dans la base de données
+ if ( $tiltspeed > 4 ) {
+ $tiltspeed = 4;
+ }
+ if ( $tiltspeed < 0 ) {
+ $tiltspeed = 0;
+ }
+ Debug( "Move Con Down Left" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DMove Down Left $tiltspeed";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setPTZSpeed%26speed%3D$tiltspeed";
+ $self->sendCmd( $cmd );
+ $cmd = "ptzMoveBottomLeft";
+ $self->sendCmd( $cmd );
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub moveConDownRight
+{
+ my $self = shift;
+ my $params = shift;
+ my $tiltspeed = $self->getParam( $params, 'tiltspeed' );
+ # speed inverter 4-->0 , 3-->1 , 2-->2 , 1-->3 , 0-->4
+ $tiltspeed = abs($tiltspeed - 4);
+ # Normalisation en cas de valeur erronée dans la base de données
+ if ( $tiltspeed > 4 ) {
+ $tiltspeed = 4;
+ }
+ if ( $tiltspeed < 0 ) {
+ $tiltspeed = 0;
+ }
+ Debug( "Move Con Down Right" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DMove Down Right $tiltspeed";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setPTZSpeed%26speed%3D$tiltspeed";
+ $self->sendCmd( $cmd );
+ $cmd = "ptzMoveBottomRight";
+ $self->sendCmd( $cmd );
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub zoomConTele
+{
+ my $self = shift;
+ Debug( "Zoom-Tele=MANU IR LED ON" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DManual IR LED Switch ON";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setInfraLedConfig%26mode%3D1";
+ $self->sendCmd( $cmd );
+ $cmd = "openInfraLed";
+ $self->sendCmd( $cmd );
+}
+
+sub zoomConWide
+{
+ my $self = shift;
+ Debug( "Zoom-Wide=MANU IR LED OFF" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DManual IR LED Switch OFF";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setInfraLedConfig%26mode%3D1";
+ $self->sendCmd( $cmd );
+ $cmd = "closeInfraLed";
+ $self->sendCmd( $cmd );
+}
+
+sub wake
+{
+ my $self = shift;
+ Debug( "Wake=AUTO IR LED" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DAuto IR LED Mode";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setInfraLedConfig%26mode%3D0";
+ $self->sendCmd( $cmd );
+}
+
+sub focusConNear
+{
+ my $self = shift;
+ my $params = shift;
+ my $speed = $self->getParam( $params, 'speed' );
+ # Normalisation en cas de valeur erronée dans la base de données
+ if ( $speed > 100 ) {
+ $speed = 100;
+ }
+ if ( $speed < 0 ) {
+ $speed = 0;
+ }
+ Debug( "Focus Near=Sharpness" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DSharpness $speed";
+ $self->sendCmd( $cmd );
+ $cmd = "setOSDSetting%26isEnableDevName%3D1";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setSharpness%26sharpness%3D$speed";
+ $self->sendCmd( $cmd );
+ # La variable speed ne fonctionne pas en paramètre du focus, alors je l'utilise pour définir la durée de la commande
+ # le résulat est identique
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub focusConFar
+{
+ my $self = shift;
+ my $params = shift;
+ my $speed = $self->getParam( $params, 'speed' );
+ # Normalisation en cas de valeur erronée dans la base de données
+ if ( $speed > 100 ) {
+ $speed = 100;
+ }
+ if ( $speed < 0 ) {
+ $speed = 0;
+ }
+ Debug( "Focus Far" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DSharpness $speed";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setSharpness%26sharpness%3D$speed";
+ $self->sendCmd( $cmd );
+ # La variable speed ne fonctionne pas en paramètre du focus alors je l'utilise pour définir la durée de la commande
+ # le résulat est identique
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub focusAuto
+{
+ my $self = shift;
+ Debug( "Focus Auto=Reset Sharpness" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DReset Sharpness";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setSharpness%26sharpness%3D10";
+ $self->sendCmd( $cmd );
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub focusMan
+{
+ my $self = shift;
+ Debug( "Focus Manu=Reset Sharpness" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DFOSCAM FI9821W Script V1.0 By Christophe_y2k";
+ $self->sendCmd( $cmd );
+ }
+}
+
+sub whiteConIn
+{
+ my $self = shift;
+ my $params = shift;
+ my $speed = $self->getParam( $params, 'speed' );
+ # Normalisation en cas de valeur erronée dans la base de données
+ if ( $speed > 100 ) {
+ $speed = 100;
+ }
+ if ( $speed < 0 ) {
+ $speed = 0;
+ }
+ Debug( "White ConIn=brightness" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DBrightness $speed";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setBrightness%26brightness%3D$speed";
+ $self->sendCmd( $cmd );
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub whiteConOut
+{
+ my $self = shift;
+ my $params = shift;
+ my $speed = $self->getParam( $params, 'speed' );
+ # Normalisation en cas de valeur erronée dans la base de données
+ if ( $speed > 100 ) {
+ $speed = 100;
+ }
+ if ( $speed < 0 ) {
+ $speed = 0;
+ }
+ Debug( "White ConOut=Contrast" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DContrast $speed";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setContrast%26constrast%3D$speed";
+ $self->sendCmd( $cmd );
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub whiteAuto
+{
+ my $self = shift;
+ Debug( "White Auto=Brightness Reset" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DBrightness Reset";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setBrightness%26brightness%3D50";
+ $self->sendCmd( $cmd );
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub whiteMan
+{
+ my $self = shift;
+ Debug( "White Manuel=Contrast Reset" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DContrast Reset";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setContrast%26constrast%3D44";
+ $self->sendCmd( $cmd );
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub irisConOpen
+{
+ my $self = shift;
+ my $params = shift;
+ my $speed = $self->getParam( $params, 'speed' );
+ # Normalisation en cas de valeur erronée dans la base de données
+ if ( $speed > 100 ) {
+ $speed = 100;
+ }
+ if ( $speed < 0 ) {
+ $speed = 0;
+ }
+ Debug( "Iris ConOpen=Saturation" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DSaturation $speed";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setSaturation%26saturation%3D$speed";
+ $self->sendCmd( $cmd );
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub irisConClose
+{
+ my $self = shift;
+ my $params = shift;
+ my $speed = $self->getParam( $params, 'speed' );
+ # Normalisation en cas de valeur erronée dans la base de données
+ if ( $speed > 100 ) {
+ $speed = 100;
+ }
+ if ( $speed < 0 ) {
+ $speed = 0;
+ }
+ Debug( "Iris ConClose=Hue" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DHue $speed";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setHue%26hue%3D$speed";
+ $self->sendCmd( $cmd );
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub irisAuto
+{
+ my $self = shift;
+ Debug( "Iris Auto=Saturation Reset" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DSaturation Reset";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setSaturation%26saturation%3D30";
+ $self->sendCmd( $cmd );
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub irisMan
+{
+ my $self = shift;
+ Debug( "Iris Manuel=Hue Reset" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DHue Reset";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setHue%26hue%3D6";
+ $self->sendCmd( $cmd );
+ $self->autoStop( $self->{Monitor}->{AutoStopTimeout} );
+}
+
+sub presetSet
+{
+ my $self = shift;
+ my $params = shift;
+ my $preset = $self->getParam( $params, 'preset' );
+ if ( ( $preset >= 1 ) && ( $preset <= 16 ) ) {
+ Debug( "Clear Preset $preset" );
+ my $cmd = "ptzDeletePresetPoint%26name%3D$preset";
+ $self->sendCmd( $cmd );
+ Debug( "Set Preset $preset" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DSet Preset $preset";
+ $self->sendCmd( $cmd );
+ }
+ $cmd = "ptzAddPresetPoint%26name%3D$preset";
+ $self->sendCmd( $cmd );
+ }
+}
+
+sub presetGoto
+{
+ my $self = shift;
+ my $params = shift;
+ my $preset = $self->getParam( $params, 'preset' );
+ if ( ( $preset >= 1 ) && ( $preset <= 16 ) ) {
+ Debug( "Goto Preset $preset" );
+ if ( $osd eq "on" )
+ {
+ my $cmd = "setDevName%26devName%3DGoto Preset $preset";
+ $self->sendCmd( $cmd );
+ }
+ my $cmd = "setPTZSpeed%26speed%3D0";
+ $self->sendCmd( $cmd );
+ $cmd = "ptzGotoPresetPoint%26name%3D$preset";
+ $self->sendCmd( $cmd );
+ }
+}
+
+1;
+__END__
+# Below is stub documentation for your module. You'd better edit it!
+
+=head1 FI9831W
+
+ZoneMinder::Database - Perl extension for FOSCAM FI9831W
+
+=head1 SYNOPSIS
+
+Control script for Foscam HD cameras. Tested on 9831W but
+should work on others too.
+
+=head1 DESCRIPTION
+
+Control script for Foscam HD cameras. Tested on 9831W but
+should work on others too.
+You need to set "usr=xxx&pwd=yyy" in the ControlDevice field
+of the control tab for that monitor.
+Auto TimeOut should be 1. Don't set it to less - processes
+start crashing :)
+
+=head2 EXPORT
+
+None by default.
+
+
+
+=head1 SEE ALSO
+
+=head1 AUTHOR
+
+Philip Coombes, E<lt>philip.coombes@zoneminder.comE<gt>
+
+=head1 COPYRIGHT AND LICENSE
+
+Copyright (C) 2001-2008 Philip Coombes
+
+This library is free software; you can redistribute it and/or modify
+it under the same terms as Perl itself, either Perl version 5.8.3 or,
+at your option, any later version of Perl 5 you may have available.
+
+
+=cut
+