# Add a new network

From the menu select **Networks** then click **Add network**.

<figure><img src="../../../.gitbook/assets/2.15-docker_networks_add_network.gif" alt=""><figcaption></figcaption></figure>

Define the new network, using the table below as a guide.

| Field/Option                       | Overview                                                                                                                                |
| ---------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------- |
| Name                               | Give the network a descriptive name.                                                                                                    |
| Driver                             | Define the [type of network](./#supported-network-types) you will use.                                                                  |
| Driver options                     | Set in place any options related to your network driver, if required.                                                                   |
| IPv4 Network configuration         | Define IPv4 range, subnet, gateway and exclude IP. If no information is entered here, Docker will automatically assign an IPv4 range.   |
| IPv6 Network configuration         | Define IPv6 range, subnet, gateway and exclude IP. If no information is entered here, Docker will automatically assign an IPv6 range.   |
| Labels                             | Add labels to the network.                                                                                                              |
| Isolated network                   | Toggle this option on to isolate any containers created in this network to this network only, with no inbound or outbound connectivity. |
| Enable manual container attachment | Toggle this option on to allow users to attach the network to running containers.                                                       |
| Deployment                         | On multi-node clusters, select the node where the network will be created.                                                              |

<figure><img src="../../../.gitbook/assets/2.15-docker_networks_add_network.png" alt=""><figcaption></figcaption></figure>

<figure><img src="../../../.gitbook/assets/2.15-docker_networks_add_network_adv_config.png" alt=""><figcaption></figcaption></figure>

When you're finished, click **Create the network**.