826ef4abb4
* Rename collection folders Signed-off-by: Thomas Dietrich <Thomas.Dietrich@tu-ilmenau.de> * Change all occurences of addons and repos Signed-off-by: Thomas Dietrich <Thomas.Dietrich@tu-ilmenau.de> * Add further corrections Signed-off-by: Thomas Dietrich <Thomas.Dietrich@tu-ilmenau.de> * Remove temporary directories after processing Signed-off-by: Thomas Dietrich <Thomas.Dietrich@tu-ilmenau.de> * Reduce addons menus, show current uncond. Signed-off-by: Thomas Dietrich <Thomas.Dietrich@tu-ilmenau.de> * Fix typo Signed-off-by: Thomas Dietrich <Thomas.Dietrich@tu-ilmenau.de> * Remove redundant addons from permalinks Signed-off-by: Thomas Dietrich <Thomas.Dietrich@tu-ilmenau.de> * Sort UI menu entries correctly Signed-off-by: Thomas Dietrich <Thomas.Dietrich@tu-ilmenau.de> * Split maven command Signed-off-by: Thomas Dietrich <Thomas.Dietrich@tu-ilmenau.de> |
||
|---|---|---|
| .. | ||
| readme.md | ||
readme.md
| id | label | title | type | description | source | since | install |
|---|---|---|---|---|---|---|---|
| plclogo | PLCLogo | PLCLogo - Bindings | binding | This binding provides native support of Siemens Logo! PLC devices. Communication with Logo is done via Moka7 library. Currently only two devices are supported: 0BA7 (Logo! 7) and 0BA8 (Logo! 8). Additionally multiple devices are supported. Different families of Logo! devices should work also, but was not tested now due to lack of hardware. | https://github.com/openhab/openhab1-addons/blob/master/bundles/binding/org.openhab.binding.plclogo/README.md | 1x | manual |
{% include base.html %}
PLCLogo Binding
This binding provides native support of Siemens Logo! PLC devices. Communication with Logo is done via Moka7 library. Currently only two devices are supported: 0BA7 (Logo! 7) and 0BA8 (Logo! 8). Additionally multiple devices are supported. Different families of Logo! devices should work also, but was not tested now due to lack of hardware.
Binding works nicely at least 100ms polling rate.
Binding Configuration
This binding can be configured in the file services/plclogo.cfg.
| Property | Default | Required | Description |
|---|---|---|---|
<plcname>.host |
Yes | IP address of the LOGO! PLC | |
<plcname>.remoteTSAP |
Yes | TSAP (in hex) of the remote LOGO! PLC, as configured by LogoSoft Comfort. Common used value is 0x0200. |
|
<plcname>.localTSAP |
Yes | TSAP (in hex) to be used by the local instance. Common used value is 0x0300. |
|
refresh |
5000 | No | polling interval, in milliseconds, to be used when querying the Logo! |
Item Configuration
Follow blocks can be read from on both device types: I, Q, M, AI, AQ and AM. For Logo! 8 devices NI, NQ, NAI and NAQ are supported additionally. Contact items are used for digital inputs, Switch items for digital inputs/outputs and Number items for analog inputs/outputs.
Writing to the PLC can be done via VB (byte values) and VW (word values) for both device types. Use Switch items for writing of digital and Number of analog values.
The configuration pattern for Contact and Switch items is:
plclogo=”<instancename>:<memorylocation>.<maskbit>”
Configuration pattern of Number items is:
plclogo=”<instancename>:<memorylocation>”
Examples
Switch ReadOutputQ13 {plclogo="plc:Q13"}
read value of output block Q13 from Logo! device named 'plc'
Switch ReadWriteBinaryValue {plclogo="plc:VB0.0"} }
read/write binary input block mapped to VB address 0, bit 0
Number ReadWriteAnalogValue {plclogo="plc:VW5"}
read/write analog input block mapped to VW address 5