openhab-docs/_addons_bindings/samsungtv

id	label	title	type	description	since	logo	install
samsungtv	Samsung TV	Samsung TV - Bindings	binding	This binding integrates the [Samsung TV's](http://www.samsung.com).	2x	images/addons/samsungtv.png	auto

{% include base.html %}

Samsung TV Binding

This binding integrates the Samsung TV's.

Supported Things

Samsung TV C (2010), D (2011), E (2012) and F (2013) models should be supported. Because Samsung does not publish any documentation about the TV's UPnP interface, there could be differences between different TV models, which could lead to mismatch problems.

Tested TV models:

Model	State	Notes
UE46E5505	OK	Initial contribution is done by this model
UE46D5700	PARTIAL	Supports at my home only commands via the fake remote, no discovery
UE40F6500	OK	All channels except colorTemperature, programTitle and channelName are working

Discovery

The TV's are discovered through UPnP protocol in the local network and all devices are put in the Inbox.

Binding Configuration

The binding does not require any special configuration.

Thing Configuration

The Samsung TV Thing requires the host name and port address as a configuration value in order for the binding to know how to access it. Samsung TV publish several UPnP devices and hostname is used to recognize those UPnP devices. Port address is used for remote control emulation protocol. Additionally, a refresh interval can be configured in milliseconds to specify how often TV resources are polled.

E.g.

Thing samsungtv:tv:livingroom [ hostName="192.168.1.10", port=55000, refreshInterval=1000 ]

Channels

TVs support the following channels:

Channel Type ID	Item Type	Description
volume	Dimmer	Volume level of the TV.
mute	Switch	Mute state of the TV.
brightness	Dimmer	Brightness of the TV picture.
contrast	Dimmer	Contrast of the TV picture.
sharpness	Dimmer	Sharpness of the TV picture.
colorTemperature	Number	Color temperature of the TV picture. Minimum value is 0 and maximum 4.
sourceName	String	Name of the current source.
sourceId	Number	Id of the current source.
channel	Number	Selected TV channel number.
programTitle	String	Program title of the current channel.
channelName	String	Name of the current TV channel.
url	String	Start TV web browser and go the given web page.
stopBrowser	Switch	Stop TV's web browser and go back to TV mode.
power	Switch	TV power. Some of the Samsung TV models doesn't allow to set Power ON remotely.
keyCode	String	The key code channel emulates the infrared remote controller and allows to send virtual button presses.

E.g.

Dimmer  TV_Volume   { channel="samsungtv:tv:livingroom:volume" }
Switch  TV_Mute     { channel="samsungtv:tv:livingroom:mute" }
String  TV_KeyCode  { channel="samsungtv:tv:livingroom:keyCode" }