openhab-docs/_addons_bindings/wifiled

id	label	title	type	description	since	install
wifiled	WiFi LED	WiFi LED - Bindings	binding	This binding is used to control LED stripes connected by WiFi. These devices are sold with different names, i.e. Magic Home LED, UFO LED, LED NET controller, etc.	2x	auto

{% include base.html %}

WiFi LED Binding

This binding is used to control LED stripes connected by WiFi. These devices are sold with different names, i.e. Magic Home LED, UFO LED, LED NET controller, etc.

Supported Things

The following table shows a list of RGBW(W) LED devices supported by this binding.

Device table with supported channels:

Device Type	power	color	white	white2	program	programSpeed
LD382	✓	✓	✓		✓	✓
LD382A	✓	✓	✓		✓	✓
LD686	✓	✓	✓	✓	✓	✓

Other LD*** devices might work but probably need some small adaptions.

Discovery

The LED WiFi Controllers can be discovered by triggering a search in openHAB's inbox. Your device needs to be connected to your local network (i.e. by using the WiFi PBC connection method or the native App shipped with the device). Read the device manual for more information about how to connect your device to your network.

Binding Configuration

No binding configuration required.

Thing Configuration

The thing can be configured through the Paper UI. Use the configuration if you have devices of type LD382 or LD686, want to enable color fading, or if the device discovery does not find your LED controller automatically.

Drivers

You can choose between two drivers with different functionality:

Driver	Supports Color Fading	Supports Programs	Polls LED State
CLASSIC		✓	✓
FADING	✓

While the CLASSIC driver let you choose and run device internal programs (e.g. alternating blue), all normal operations (turn on or off, switch color, set brightness, ...) are performed immediately and without any fading effect.

If you prefer to switch colors smoothly and to turn your light on and off by slightly rising/decreasing the brightness you should try the FADING driver. If selected you can also set the number of fading steps and the fading duration in the thing configuration. Note that each fading step will at least take 10 ms for being processed. This natural limit is given by the speed of the LED controller and your network speed. Thus, a color fading with a configured fading duration of 0s might still take some time (count with more than 1 second for 100 steps). IF the "FADING" driver is chosen the program channel and the programSpeed channel will not have any effect.

The polling period is a parameter only used by the CLASSIC driver and specifies a the time in seconds after the LED state is refreshed in openHAB.

Device Discovery

If the automatic discovery fails you have to set the IP address and the port of your device manually. Moreover, make sure that the device protocol matches you device type.

Channels

Channel Type ID	Item Type	Description	Access
power	Switch	Power state of the LEDs (ON/OFF)	R/W
color	Color	Color of the RGB LEDs	R/W
white	Dimmer	Brightness of the first (warm) white LEDs (min=0, max=100)	R/W
white2	Dimmer	Brightness of the second (warm) white LEDs (min=0, max=100)	R/W
program	String	Program to run by the controller (i.e. color cross fade, strobe, etc.)	R/W
programSpeed	Dimmer	Speed of the program	R/W

Full example

Usually, there is no need to define your WiFi LED controllers via configuration files. However, if you like to do it, here is an example.

wifiled.things:

Thing wifiled:wifiled:F0FE6B19CB2A [ ip="192.168.178.91", port=5577, pollingPeriod=3000, protocol="LD686", driver="CLASSIC", fadeDurationInMs=1000, fadeSteps=100 ]

wifiled.items:

Switch MyWiFiLight_power "Power" (Light) {channel="wifiled:wifiled:F0FE6B19CB2A:power"}
Dimmer MyWiFiLight_white "White" (Light) {channel="wifiled:wifiled:F0FE6B19CB2A:white"}
Color  MyWiFiLight_color "Color" (Light) {channel="wifiled:wifiled:F0FE6B19CB2A:color"}