---
layout: documentation
title: HS1DS - ZWave
---

{% include base.html %}

# HS1DS Window / Door Sensor
This describes the Z-Wave device *HS1DS*, manufactured by *Z-Wave.Me* with the thing type UID of ```zwaveme_hs1ds_00_000```.

The device is in the category of *Window*, defining Window.

![HS1DS product image](https://opensmarthouse.org/zwavedatabase/783/image/)


## Overview

This is a intelligent door sensor , adopts super low power Z-Wave wireless networking technology, makes a longer battery life-span, Feel open or close state of the door or window through the near and separation between sensor and magnetic. Dual sensor design, makes the installation more flexible and adaptable. Products are suitable for home, villas, factories, shops, warehouses, office buildings, banks, room and other places of safety prevention

### Inclusion Information

 press the device networking hole for 3 times in 1.5 seconds, then the green LED flashes quickly

### Exclusion Information

Not provided

## Channels

The following table summarises the channels available for the HS1DS -:

| Channel Name | Channel ID | Channel Type | Category | Item Type |
|--------------|------------|--------------|----------|-----------|
| Binary Sensor | sensor_door | sensor_door | Door | Contact | 
| Alarm (burglar) | alarm_burglar | alarm_burglar | Door | Switch | 
| Battery Level | battery-level | system.battery_level | Battery | Number |

### Binary Sensor
Indicates if the door/window is open or closed.

The ```sensor_door``` channel is of type ```sensor_door``` and supports the ```Contact``` item and is in the ```Door``` category. This is a read only channel so will only be updated following state changes from the device.

The following state translation is provided for this channel to the ```Contact``` item type -:

| Value | Label     |
|-------|-----------|
| OPEN | Open |
| CLOSED | Closed |

### Alarm (burglar)
Indicates if the burglar alarm is triggered.

The ```alarm_burglar``` channel is of type ```alarm_burglar``` and supports the ```Switch``` item and is in the ```Door``` category. This is a read only channel so will only be updated following state changes from the device.

The following state translation is provided for this channel to the ```Switch``` item type -:

| Value | Label     |
|-------|-----------|
| OFF | OK |
| ON | Alarm |

### Battery Level
Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.

The ```system.battery-level``` channel is of type ```system.battery-level``` and supports the ```Number``` item and is in the ```Battery``` category.
This channel provides the battery level as a percentage and also reflects the low battery warning state. If the battery state is in low battery warning state, this will read 0%.


## Device Configuration

The device has no configuration parameters defined.

## Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The HS1DS supports 1 association group.

### Group 1: Controller Updates


Association group 1 supports 5 nodes.

## Technical Information

### Endpoints

#### Endpoint 0

| Command Class | Comment |
|---------------|---------|
| COMMAND_CLASS_SENSOR_BINARY_V2| Linked to BASIC|
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1| |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1| |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1| |
| COMMAND_CLASS_ALARM_V4| |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| |
| COMMAND_CLASS_POWERLEVEL_V1| |
| COMMAND_CLASS_BATTERY_V1| |
| COMMAND_CLASS_WAKE_UP_V2| |
| COMMAND_CLASS_ASSOCIATION_V2| |
| COMMAND_CLASS_VERSION_V2| |

### Documentation Links

* [Manual](https://opensmarthouse.org/zwavedatabase/783/reference/HSIDS-Z.pdf)

---

Did you spot an error in the above definition or want to improve the content?
You can [contribute to the database here](https://opensmarthouse.org/zwavedatabase/783).