--- layout: documentation title: ZDM-80 - ZWave --- {% include base.html %} # ZDM-80 Wall plug dimmer switch This describes the Z-Wave device *ZDM-80*, manufactured by *Remotec* with the thing type UID of ```remotec_adt8021_00_000```. The device is in the category of *Power Outlet*, defining Small devices to be plugged into a power socket in a wall which stick there. ![ZDM-80 product image](https://opensmarthouse.org/zwavedatabase/693/image/) The ZDM-80 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network. ## Overview Dimming Module ### Inclusion Information Triple click the PROG button within 1 second. ## Channels The following table summarises the channels available for the ZDM-80 -: | Channel Name | Channel ID | Channel Type | Category | Item Type | |--------------|------------|--------------|----------|-----------| | Switch | switch_binary | switch_binary | Switch | Switch | | Scene Number | scene_number | scene_number | | Number | ### Switch Switch the power on and off. The ```switch_binary``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category. ### Scene Number Triggers when a scene button is pressed. The ```scene_number``` channel is of type ```scene_number``` and supports the ```Number``` item. ## Device Configuration The following table provides a summary of the 6 configuration parameters available in the ZDM-80. Detailed information on each parameter can be found in the sections below. | Param | Name | Description | |-------|-------|-------------| | 1 | All On/All Off | All On/All Off | | 5 | Switch state after power failure | Switch state after power failure | | 13 | Double click option | Double click option | | 17 | Dimming time frame | Dimming time frame | | 18 | Maximum Dimmer level control | Maximum Dimmer level control | | 19 | Minimum Dimmer level control | Minimum Dimmer level control | | | Switch All Mode | Set the mode for the switch when receiving SWITCH ALL commands | ### Parameter 1: All On/All Off All On/All Off The following option values may be configured -: | Value | Description | |--------|-------------| | -1 | All On active, All Off active | | 0 | All On is not active, All Off is not active | | 1 | All On is not active, All Off active | | 2 | All On active, All Off is not active | The manufacturer defined default value is ```-1``` (All On active, All Off active). This parameter has the configuration ID ```config_1_1``` and is of type ```INTEGER```. ### Parameter 5: Switch state after power failure Switch state after power failure The following option values may be configured -: | Value | Description | |--------|-------------| | 0 | Switch is OFF | | 1 | Switch saves its state before power failure. | The manufacturer defined default value is ```1``` (Switch saves its state before power failure.). This parameter has the configuration ID ```config_5_1``` and is of type ```INTEGER```. ### Parameter 13: Double click option Double click option The following option values may be configured -: | Value | Description | |--------|-------------| | 0 | Disabled | | 1 | Enabled | The manufacturer defined default value is ```1``` (Enabled). This parameter has the configuration ID ```config_13_1``` and is of type ```INTEGER```. ### Parameter 17: Dimming time frame Dimming time frame Sets the time of moving the Dimmer from 0% to max. dimming values. (The ZDM-80 will implement the dimming duration if received this parameter value from controller/gateway. Otherwise, the ZDM-80 will implement the local parameter value) Values in the range 0 to 5 may be set. The manufacturer defined default value is ```3```. This parameter has the configuration ID ```config_17_1``` and is of type ```INTEGER```. ### Parameter 18: Maximum Dimmer level control Maximum Dimmer level control Define the upper dimming level. Higher percentages lead to higher brightness level. Values in the range 2 to 99 may be set. The manufacturer defined default value is ```99```. This parameter has the configuration ID ```config_18_1``` and is of type ```INTEGER```. ### Parameter 19: Minimum Dimmer level control Minimum Dimmer level control Define the lower dimming level. Lower percentages lead to lower brightness level. Values in the range 1 to 98 may be set. The manufacturer defined default value is ```13```. This parameter has the configuration ID ```config_19_1``` and is of type ```INTEGER```. ### Switch All Mode Set the mode for the switch when receiving SWITCH ALL commands. The following option values may be configured -: | Value | Description | |--------|-------------| | 0 | Exclude from All On and All Off groups | | 1 | Include in All On group | | 2 | Include in All Off group | | 255 | Include in All On and All Off groups | This parameter has the configuration ID ```switchall_mode``` and is of type ```INTEGER```. ## Association Groups Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic. The ZDM-80 supports 2 association groups. ### Group 1: Group 1 Association group_1 is used to report status change such as AUTO report to gateway. Association group 1 supports 1 node. ### Group 2: Group 2 # Dimmer mode: ZDM-80 will send out related dimming level e.g. 50% by basic set command to its association group automatically when ZDM-80 received the dimming command by local switch or wireless command e.g. 50%. # Switch mode: ZDM-80 will send out related basic set command On (0xFF) or Off (0x00) to its association group automatically when ZDM-80 received On (0xFF) or Off (0x00) command by local switch or wireless command respectively. (Max. 4 nodes ID can be assigned to this association group) Association group 2 supports 4 nodes. ## Technical Information ### Endpoints #### Endpoint 0 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_NO_OPERATION_V1| | | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SWITCH_BINARY_V1| Linked to BASIC| | COMMAND_CLASS_SWITCH_ALL_V1| | | COMMAND_CLASS_SCENE_ACTIVATION_V1| | | COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1| | | COMMAND_CLASS_CONFIGURATION_V1| | | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| | | COMMAND_CLASS_POWERLEVEL_V1| | | COMMAND_CLASS_ASSOCIATION_V2| | | COMMAND_CLASS_VERSION_V1| | ### Documentation Links * [Web Page](https://opensmarthouse.org/zwavedatabase/693/reference/ZDM-80SA.pdf) --- Did you spot an error in the above definition or want to improve the content? You can [contribute to the database here](https://opensmarthouse.org/zwavedatabase/693).