---
layout: documentation
title: 05433 - ZWave
---

{% include base.html %}

# 05433 One Paddle Wall Dimmer Insert
This describes the Z-Wave device *05433*, manufactured by *Reitz-Group.de* with the thing type UID of ```reitz_05433_00_000```.

The device is in the category of *Wall Switch*, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.

![05433 product image](https://opensmarthouse.org/zwavedatabase/51/image/)


The 05433 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers.  This device is also able to participate in the routing of data between other devices in the mesh network.

## Overview

For wireless dimming of: light bulbs, HV and LV halogen lamps with conventional transformer. Combinable with all Z-Wave transmitters and remote controls. For installation in splash-proof junction box IP 44, can be selectively installed in flush-mounted power points and canopies or triggered directly via wireless rockers.

### Inclusion Information

Press the "Include" button 3 times

### Exclusion Information

Press the "Exclude" button for 2 seconds

## Channels

The following table summarises the channels available for the 05433 -:

| Channel Name | Channel ID | Channel Type | Category | Item Type |
|--------------|------------|--------------|----------|-----------|
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer | 

### Dimmer
The brightness channel allows to control the brightness of a light.
            It is also possible to switch the light on and off.

The ```switch_dimmer``` channel is of type ```switch_dimmer``` and supports the ```Dimmer``` item and is in the ```DimmableLight``` category.



## Device Configuration

The device has no configuration parameters defined.

## Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The 05433 supports 1 association group.

### Group 1: Basic On/Off Group


Association group 1 supports 5 nodes.

## Technical Information

### Endpoints

#### Endpoint 0

| Command Class | Comment |
|---------------|---------|
| COMMAND_CLASS_NO_OPERATION_V1| |
| COMMAND_CLASS_BASIC_V1| |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V2| Linked to BASIC|
| COMMAND_CLASS_SWITCH_ALL_V1| |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| |
| COMMAND_CLASS_PROTECTION_V1| |
| COMMAND_CLASS_HAIL_V1| |
| COMMAND_CLASS_ASSOCIATION_V1| |
| COMMAND_CLASS_VERSION_V1| |
| COMMAND_CLASS_INDICATOR_V1| |

### Documentation Links

* [User Manual](https://opensmarthouse.org/zwavedatabase/51/reference/Duwi5433.pdf)

---

Did you spot an error in the above definition or want to improve the content?
You can [contribute to the database here](https://opensmarthouse.org/zwavedatabase/51).