---
layout: documentation
title: ZDS-UD10 - ZWave
---

{% include base.html %}

# ZDS-UD10 Dimming Switch Module
This describes the Z-Wave device *ZDS-UD10*, manufactured by *Airline Mechanical Co., Ltd.* with the thing type UID of ```amc_zdsud10_00_000```.

The device is in the category of *Power Outlet*, defining Small devices to be plugged into a power socket in a wall which stick there.

![ZDS-UD10 product image](https://opensmarthouse.org/zwavedatabase/184/image/)


The ZDS-UD10 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers.  This device is also able to participate in the routing of data between other devices in the mesh network.

## Overview

Thank you for choosing ZDS-100 Z-Wave control product. Our Z-Wave enabled product allows user to remotely control lighting, home appliance, and make home control easy at low installation / maintenance cost. 

### Inclusion Information

Tap the button

### Exclusion Information

Tap the button

## Channels

The following table summarises the channels available for the ZDS-UD10 -:

| Channel Name | Channel ID | Channel Type | Category | Item Type |
|--------------|------------|--------------|----------|-----------|
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer | 

### Dimmer
The brightness channel allows to control the brightness of a light.
            It is also possible to switch the light on and off.

The ```switch_dimmer``` channel is of type ```switch_dimmer``` and supports the ```Dimmer``` item and is in the ```DimmableLight``` category.



## Device Configuration

The device has no configuration parameters defined.

## Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The device does not support associations.
## Technical Information

### Endpoints

#### Endpoint 0

| Command Class | Comment |
|---------------|---------|
| COMMAND_CLASS_NO_OPERATION_V1| |
| COMMAND_CLASS_BASIC_V1| |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V2| Linked to BASIC|
| COMMAND_CLASS_SWITCH_ALL_V1| |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| |
| COMMAND_CLASS_POWERLEVEL_V1| |
| COMMAND_CLASS_VERSION_V1| |

### Documentation Links

* [User Manual](https://opensmarthouse.org/zwavedatabase/184/reference/ZDS-manual.pdf)

---

Did you spot an error in the above definition or want to improve the content?
You can [contribute to the database here](https://opensmarthouse.org/zwavedatabase/184).