---
layout: documentation
title: 5046xx - ZWave
---

{% include base.html %}

# 5046xx Dimmer Insert Button
This describes the Z-Wave device *5046xx*, manufactured by *Merten* with the thing type UID of ```merten_5046xx_00_000```.

The device is in the category of *Wall Switch*, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.

![5046xx product image](https://opensmarthouse.org/zwavedatabase/1192/image/)


The 5046xx supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers.  This device is also able to participate in the routing of data between other devices in the mesh network.

## Overview

A CONNECT radio sensor cover for dimmer inserts.

### Inclusion Information

Press the button three times

### Exclusion Information

Press the button three times

## Channels

The following table summarises the channels available for the 5046xx -:

| Channel Name | Channel ID | Channel Type | Category | Item Type |
|--------------|------------|--------------|----------|-----------|
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer | 

### Dimmer
The brightness channel allows to control the brightness of a light.
            It is also possible to switch the light on and off.

The ```switch_dimmer``` channel is of type ```switch_dimmer``` and supports the ```Dimmer``` item and is in the ```DimmableLight``` category.



## Device Configuration

The device has no configuration parameters defined.

## Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The 5046xx supports 2 association groups.

### Group 1:  Other device so be switched


Association group 1 supports 5 nodes.

### Group 2: Group 2


Association group 2 supports 5 nodes.

## Technical Information

### Endpoints

#### Endpoint 0

| Command Class | Comment |
|---------------|---------|
| COMMAND_CLASS_NO_OPERATION_V1| |
| COMMAND_CLASS_BASIC_V1| |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V1| Linked to BASIC|
| COMMAND_CLASS_SWITCH_ALL_V1| |
| COMMAND_CLASS_SWITCH_TOGGLE_MULTILEVEL_V1| |
| COMMAND_CLASS_CONFIGURATION_V1| |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| |
| COMMAND_CLASS_PROTECTION_V2| |
| COMMAND_CLASS_ASSOCIATION_V1| |
| COMMAND_CLASS_VERSION_V1| |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V1| |

### Documentation Links

* [Merten 5046xx](https://opensmarthouse.org/zwavedatabase/1192/reference/untitled.pdf)

---

Did you spot an error in the above definition or want to improve the content?
You can [contribute to the database here](https://opensmarthouse.org/zwavedatabase/1192).