--- layout: documentation title: HTP-8S0-XX - ZWave --- {% include base.html %} # HTP-8S0-XX 8 way touch light switch This describes the Z-Wave device *HTP-8S0-XX*, manufactured by *[Hogar Controls](http://hogarcontrols.com/)* with the thing type UID of ```hogar_htp850xx_00_000```. The device is in the category of *Wall Switch*, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch. ![HTP-8S0-XX product image](https://opensmarthouse.org/zwavedatabase/841/image/) The HTP-8S0-XX supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network. ## Overview 8 way touch panel manufactured by Hogar controls. ### Inclusion Information Touch and hold any key on the panel excess 5 seconds. All indication lights blinks blue, then release, touch panel start inclusion process ### Exclusion Information Touch and hold any key on the panel excess 10 seconds. All indication lights blinks blue, then release, touch panel start exclusion process ## Channels The following table summarises the channels available for the HTP-8S0-XX -: | Channel Name | Channel ID | Channel Type | Category | Item Type | |--------------|------------|--------------|----------|-----------| | Switch | switch_binary | switch_binary | Switch | Switch | | Switch 1 | switch_binary1 | switch_binary | Switch | Switch | | Switch 2 | switch_binary2 | switch_binary | Switch | Switch | | Switch 3 | switch_binary3 | switch_binary | Switch | Switch | | Switch 4 | switch_binary4 | switch_binary | Switch | Switch | | Switch 5 | switch_binary5 | switch_binary | Switch | Switch | | Switch 6 | switch_binary6 | switch_binary | Switch | Switch | | Switch 7 | switch_binary7 | switch_binary | Switch | Switch | | Switch 8 | switch_binary8 | switch_binary | Switch | Switch | ### Switch Switch the power on and off. The ```switch_binary``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category. ### Switch 1 Switch the power on and off. The ```switch_binary1``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category. ### Switch 2 Switch the power on and off. The ```switch_binary2``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category. ### Switch 3 Switch the power on and off. The ```switch_binary3``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category. ### Switch 4 Switch the power on and off. The ```switch_binary4``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category. ### Switch 5 Switch the power on and off. The ```switch_binary5``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category. ### Switch 6 Switch the power on and off. The ```switch_binary6``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category. ### Switch 7 Switch the power on and off. The ```switch_binary7``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category. ### Switch 8 Switch the power on and off. The ```switch_binary8``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category. ## Device Configuration The device has no configuration parameters defined. ## Association Groups Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic. The HTP-8S0-XX supports 9 association groups. ### Group 1: Lifeline The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation. Association group 1 supports 1 node. ### Group 2: HGT-01 Basic Set Basic Set Association group 2 supports 5 nodes. ### Group 3: HGT-01 Switch Binary Set Switch Binary Set Association group 3 supports 5 nodes. ### Group 4: HGT-02 Basic Set Basic Set Association group 4 supports 5 nodes. ### Group 5: HGT-02 Switch Binary Set Switch Binary Set Association group 5 supports 5 nodes. ### Group 6: HGT-03 Basic Set Basic Set Association group 6 supports 5 nodes. ### Group 7: HGT-03 Switch Binary Set Switch Binary Set Association group 7 supports 5 nodes. ### Group 8: HGT-04 Basic Set Basic Set Association group 8 supports 5 nodes. ### Group 9: HGT-04 Switch Binary Set Switch Binary Set Association group 9 supports 5 nodes. ## Technical Information ### Endpoints #### Endpoint 0 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_NO_OPERATION_V1| | | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SWITCH_BINARY_V1| Linked to BASIC| | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1| | | COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1| | | COMMAND_CLASS_ZWAVEPLUS_INFO_V1| | | COMMAND_CLASS_MULTI_CHANNEL_V2| | | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| | | COMMAND_CLASS_POWERLEVEL_V1| | | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1| | | COMMAND_CLASS_ASSOCIATION_V2| | | COMMAND_CLASS_VERSION_V2| | | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3| | #### Endpoint 1 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_SWITCH_BINARY_V1| | | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1| | | COMMAND_CLASS_ZWAVEPLUS_INFO_V1| | | COMMAND_CLASS_ASSOCIATION_V2| | #### Endpoint 2 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_SWITCH_BINARY_V1| | | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1| | | COMMAND_CLASS_ZWAVEPLUS_INFO_V1| | | COMMAND_CLASS_ASSOCIATION_V2| | #### Endpoint 3 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_SWITCH_BINARY_V1| | | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1| | | COMMAND_CLASS_ZWAVEPLUS_INFO_V1| | | COMMAND_CLASS_ASSOCIATION_V2| | #### Endpoint 4 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_SWITCH_BINARY_V1| | | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1| | | COMMAND_CLASS_ZWAVEPLUS_INFO_V1| | | COMMAND_CLASS_ASSOCIATION_V2| | #### Endpoint 5 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_SWITCH_BINARY_V1| | | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1| | | COMMAND_CLASS_ZWAVEPLUS_INFO_V1| | | COMMAND_CLASS_ASSOCIATION_V2| | #### Endpoint 6 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_SWITCH_BINARY_V1| | | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1| | | COMMAND_CLASS_ZWAVEPLUS_INFO_V1| | | COMMAND_CLASS_ASSOCIATION_V2| | #### Endpoint 7 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_SWITCH_BINARY_V1| | | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1| | | COMMAND_CLASS_ZWAVEPLUS_INFO_V1| | | COMMAND_CLASS_ASSOCIATION_V2| | #### Endpoint 8 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_SWITCH_BINARY_V1| | | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1| | | COMMAND_CLASS_ZWAVEPLUS_INFO_V1| | | COMMAND_CLASS_ASSOCIATION_V2| | ### Documentation Links * [User Manual](https://opensmarthouse.org/zwavedatabase/841/reference/User-manual-V1-20170503.pdf) --- Did you spot an error in the above definition or want to improve the content? You can [contribute to the database here](https://opensmarthouse.org/zwavedatabase/841).