---
layout: documentation
title: LOM15 - ZWave
---

{% include base.html %}

# LOM15 Duplex Receptacle
This describes the Z-Wave device *LOM15*, manufactured by *Evolve* with the thing type UID of ```evolve_lom15_00_000```.

The device is in the category of *Wall Switch*, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.

![LOM15 product image](https://opensmarthouse.org/zwavedatabase/660/image/)


The LOM15 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers.  This device is also able to participate in the routing of data between other devices in the mesh network.

## Overview

 Inclusion of this Outlet on a Z-Wave network allows remote ON/OFF control of loads connected to the controlled outlet (the other outlet remains powered at all times) and its fully scene capable. This device is compatible with Z-Wave security systems and can handle a maximum of the following loads:

  * Incandescent – 600W, 120 VAC
  * Resistive – 15 amps (1800 watts), 120 VAC
  * Motor – ½ H.P., 120 

### Inclusion Information

Quickly double tap the button or paddle (either top or bottom) on the device–both taps must occur within approximately 20 milliseconds of each other.

### Exclusion Information

Quickly double tap the button or paddle (either top or bottom) on the device–both taps must occur within approximately 20 milliseconds of each other.

## Channels

The following table summarises the channels available for the LOM15 -:

| Channel Name | Channel ID | Channel Type | Category | Item Type |
|--------------|------------|--------------|----------|-----------|
| Switch | switch_binary | switch_binary | Switch | Switch | 
| Scene Number | scene_number | scene_number |  | Number | 

### Switch
Switch the power on and off.

The ```switch_binary``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category.

### Scene Number
Triggers when a scene button is pressed.

The ```scene_number``` channel is of type ```scene_number``` and supports the ```Number``` item.



## Device Configuration

The device has no configuration parameters defined.

## Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The device does not support associations.
## Technical Information

### Endpoints

#### Endpoint 0

| Command Class | Comment |
|---------------|---------|
| COMMAND_CLASS_NO_OPERATION_V1| |
| COMMAND_CLASS_BASIC_V1| |
| COMMAND_CLASS_SWITCH_BINARY_V1| Linked to BASIC|
| COMMAND_CLASS_SWITCH_ALL_V1| |
| COMMAND_CLASS_SCENE_ACTIVATION_V1| |
| COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1| |
| COMMAND_CLASS_CONFIGURATION_V1| |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| |
| COMMAND_CLASS_POWERLEVEL_V1| |
| COMMAND_CLASS_PROTECTION_V1| |
| COMMAND_CLASS_VERSION_V1| |

### Documentation Links

* [Product overview](https://opensmarthouse.org/zwavedatabase/660/reference/LOM-15.pdf)

---

Did you spot an error in the above definition or want to improve the content?
You can [contribute to the database here](https://opensmarthouse.org/zwavedatabase/660).