---
layout: documentation
title: VRR15-1LZ - ZWave
---

{% include base.html %}

# VRR15-1LZ Receptacle
This describes the Z-Wave device *VRR15-1LZ*, manufactured by *Leviton* with the thing type UID of ```leviton_vrr151lz_00_000```.

The device is in the category of *Power Outlet*, defining Small devices to be plugged into a power socket in a wall which stick there.

![VRR15-1LZ product image](https://opensmarthouse.org/zwavedatabase/701/image/)


The VRR15-1LZ supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers.  This device is also able to participate in the routing of data between other devices in the mesh network.

## Overview

Vizia RF + Split Duplex Receptacle

### Inclusion Information

Install VRR15-1LZ, place controller in inclusion mode, press on/off button on VRR15-1LZ to include

### Exclusion Information

Place controller in exclusion mode, press on/off button on VRR15-1LZ to exclude

## Channels

The following table summarises the channels available for the VRR15-1LZ -:

| Channel Name | Channel ID | Channel Type | Category | Item Type |
|--------------|------------|--------------|----------|-----------|
| Switch | switch_binary | switch_binary | Switch | Switch | 
| Scene Number | scene_number | scene_number |  | Number | 

### Switch
Switch the power on and off.

The ```switch_binary``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category.

### Scene Number
Triggers when a scene button is pressed.

The ```scene_number``` channel is of type ```scene_number``` and supports the ```Number``` item.



## Device Configuration

The device has no configuration parameters defined.

## Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The VRR15-1LZ supports 1 association group.

### Group 1: Group 1


Association group 1 supports 5 nodes.

## Technical Information

### Endpoints

#### Endpoint 0

| Command Class | Comment |
|---------------|---------|
| COMMAND_CLASS_NO_OPERATION_V1| |
| COMMAND_CLASS_BASIC_V1| |
| COMMAND_CLASS_APPLICATION_STATUS_V1| |
| COMMAND_CLASS_SWITCH_BINARY_V1| Linked to BASIC|
| COMMAND_CLASS_SWITCH_ALL_V1| |
| COMMAND_CLASS_SCENE_ACTIVATION_V1| |
| COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1| |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| |
| COMMAND_CLASS_POWERLEVEL_V1| |
| COMMAND_CLASS_NODE_NAMING_V1| |
| COMMAND_CLASS_ASSOCIATION_V1| |
| COMMAND_CLASS_VERSION_V1| |
| COMMAND_CLASS_MANUFACTURER_PROPRIETARY_V1| |

### Documentation Links

* [VRR15-1L Manual](https://opensmarthouse.org/zwavedatabase/701/reference/Ins-VRR15.pdf)

---

Did you spot an error in the above definition or want to improve the content?
You can [contribute to the database here](https://opensmarthouse.org/zwavedatabase/701).