--- layout: documentation title: FGR-316 - ZWave --- {% include base.html %} # FGR-316 DIN Rail 6x2kW Universal Switch / 4xInputs This describes the Z-Wave device *FGR-316*, manufactured by *Z-Wave.Me* with the thing type UID of ```zwaveme_fgr316_00_000```. The device is in the category of *Power Outlet*, defining Small devices to be plugged into a power socket in a wall which stick there. ![FGR-316 product image](https://opensmarthouse.org/zwavedatabase/734/image/) The FGR-316 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network. ## Overview * 6CH relay switch (max. 16A) * Digital temperature sensor * Digital input * 2x analogue inputs 0-10V and 4-20mA (for general use) ### Inclusion Information Push 3 times ### Exclusion Information Push 3 times ## Channels The following table summarises the channels available for the FGR-316 -: | Channel Name | Channel ID | Channel Type | Category | Item Type | |--------------|------------|--------------|----------|-----------| | Switch | switch_binary | switch_binary | Switch | Switch | | Binary Sensor | sensor_binary | sensor_binary | | Switch | | Sensor (temperature) | sensor_temperature | sensor_temperature | Temperature | Number:Temperature | | Sensor (general) | sensor_general | sensor_general | | Number | | Alarm (access) | alarm_access | alarm_access | Door | Switch | | Battery Level | battery-level | system.battery_level | Battery | Number | | Switch 1 | switch_binary1 | switch_binary | Switch | Switch | | Switch 2 | switch_binary2 | switch_binary | Switch | Switch | | Switch 3 | switch_binary3 | switch_binary | Switch | Switch | | Switch 4 | switch_binary4 | switch_binary | Switch | Switch | | Switch 5 | switch_binary5 | switch_binary | Switch | Switch | | Switch 6 | switch_binary6 | switch_binary | Switch | Switch | | Sensor (general) 7 | sensor_general7 | sensor_general | | Number | | Sensor (general) 8 | sensor_general8 | sensor_general | | Number | | Sensor (temperature) 9 | sensor_temperature9 | sensor_temperature | Temperature | Number:Temperature | | Binary Sensor 10 | sensor_binary10 | sensor_binary | | Switch | | Alarm (access) 10 | alarm_access10 | alarm_access | Door | Switch | ### Switch Switch the power on and off. The ```switch_binary``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category. ### Binary Sensor Indicates if a sensor has triggered. The ```sensor_binary``` channel is of type ```sensor_binary``` and supports the ```Switch``` item. This is a read only channel so will only be updated following state changes from the device. The following state translation is provided for this channel to the ```Switch``` item type -: | Value | Label | |-------|-----------| | ON | Triggered | | OFF | Untriggered | ### Sensor (temperature) Indicates the current temperature. The ```sensor_temperature``` channel is of type ```sensor_temperature``` and supports the ```Number:Temperature``` item and is in the ```Temperature``` category. ### Sensor (general) The ```sensor_general``` channel is of type ```sensor_general``` and supports the ```Number``` item. This is a read only channel so will only be updated following state changes from the device. ### Alarm (access) Indicates if the access control alarm is triggered. The ```alarm_access``` channel is of type ```alarm_access``` and supports the ```Switch``` item and is in the ```Door``` category. This is a read only channel so will only be updated following state changes from the device. The following state translation is provided for this channel to the ```Switch``` item type -: | Value | Label | |-------|-----------| | OFF | OK | | ON | Alarm | ### Battery Level Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading. The ```system.battery-level``` channel is of type ```system.battery-level``` and supports the ```Number``` item and is in the ```Battery``` category. This channel provides the battery level as a percentage and also reflects the low battery warning state. If the battery state is in low battery warning state, this will read 0%. ### Switch 1 Switch the power on and off. The ```switch_binary1``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category. ### Switch 2 Switch the power on and off. The ```switch_binary2``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category. ### Switch 3 Switch the power on and off. The ```switch_binary3``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category. ### Switch 4 Switch the power on and off. The ```switch_binary4``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category. ### Switch 5 Switch the power on and off. The ```switch_binary5``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category. ### Switch 6 Switch the power on and off. The ```switch_binary6``` channel is of type ```switch_binary``` and supports the ```Switch``` item and is in the ```Switch``` category. ### Sensor (general) 7 The ```sensor_general7``` channel is of type ```sensor_general``` and supports the ```Number``` item. This is a read only channel so will only be updated following state changes from the device. ### Sensor (general) 8 The ```sensor_general8``` channel is of type ```sensor_general``` and supports the ```Number``` item. This is a read only channel so will only be updated following state changes from the device. ### Sensor (temperature) 9 Indicates the current temperature. The ```sensor_temperature9``` channel is of type ```sensor_temperature``` and supports the ```Number:Temperature``` item and is in the ```Temperature``` category. ### Binary Sensor 10 Indicates if a sensor has triggered. The ```sensor_binary10``` channel is of type ```sensor_binary``` and supports the ```Switch``` item. This is a read only channel so will only be updated following state changes from the device. The following state translation is provided for this channel to the ```Switch``` item type -: | Value | Label | |-------|-----------| | ON | Triggered | | OFF | Untriggered | ### Alarm (access) 10 Indicates if the access control alarm is triggered. The ```alarm_access10``` channel is of type ```alarm_access``` and supports the ```Switch``` item and is in the ```Door``` category. This is a read only channel so will only be updated following state changes from the device. The following state translation is provided for this channel to the ```Switch``` item type -: | Value | Label | |-------|-----------| | OFF | OK | | ON | Alarm | ## Device Configuration The device has no configuration parameters defined. ## Association Groups Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic. The device does not support associations. ## Technical Information ### Endpoints #### Endpoint 0 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_NO_OPERATION_V1| | | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SWITCH_BINARY_V1| Linked to BASIC| | COMMAND_CLASS_SENSOR_BINARY_V2| | | COMMAND_CLASS_SENSOR_MULTILEVEL_V7| | | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1| | | COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1| | | COMMAND_CLASS_ZWAVEPLUS_INFO_V1| | | COMMAND_CLASS_MULTI_CHANNEL_V2| | | COMMAND_CLASS_CONFIGURATION_V1| | | COMMAND_CLASS_ALARM_V5| | | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| | | COMMAND_CLASS_POWERLEVEL_V1| | | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1| | | COMMAND_CLASS_BATTERY_V1| | | COMMAND_CLASS_WAKE_UP_V2| | | COMMAND_CLASS_ASSOCIATION_V2| | | COMMAND_CLASS_VERSION_V2| | | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3| | #### Endpoint 1 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SWITCH_BINARY_V1| Linked to BASIC| #### Endpoint 2 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SWITCH_BINARY_V1| Linked to BASIC| #### Endpoint 3 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SWITCH_BINARY_V1| Linked to BASIC| #### Endpoint 4 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SWITCH_BINARY_V1| Linked to BASIC| #### Endpoint 5 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SWITCH_BINARY_V1| Linked to BASIC| #### Endpoint 6 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SWITCH_BINARY_V1| Linked to BASIC| #### Endpoint 7 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SENSOR_MULTILEVEL_V7| Linked to BASIC| #### Endpoint 8 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SENSOR_MULTILEVEL_V7| Linked to BASIC| #### Endpoint 9 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SENSOR_MULTILEVEL_V7| Linked to BASIC| #### Endpoint 10 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SENSOR_BINARY_V2| | | COMMAND_CLASS_ALARM_V5| | ### Documentation Links * [Haseman Z-Wave DIN Rail 6 x 2kW Universal Switch module specifications](https://opensmarthouse.org/zwavedatabase/734/reference/Haseman-Z-Wave-DIN-Rail-6x2kW-Universal-Switch-module-DIN-6CH-RELAY-DATA.pdf) --- Did you spot an error in the above definition or want to improve the content? You can [contribute to the database here](https://opensmarthouse.org/zwavedatabase/734).