---
layout: documentation
title: IWD600S - ZWave
---

{% include base.html %}

# IWD600S Dimmer switch 600w incandescent
This describes the Z-Wave device *IWD600S*, manufactured by *Monster Cable* with the thing type UID of ```monster_iwd600s_00_000```.

The device is in the category of *Wall Switch*, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.

![IWD600S product image](https://opensmarthouse.org/zwavedatabase/982/image/)


The IWD600S supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers.  This device is also able to participate in the routing of data between other devices in the mesh network.

## Overview

Scene-Capable Preset Digital / Z-Wave 900MHz Incandescent Return to Neutral Dimmer. 

Rebranded Leviton RZI06-1L

### Inclusion Information

<table>
  <tr>
    <td>
      <ol>
        <li>
          Install IWD600S
        </li>
        <li>
          Place controller in inclusion mode
        </li>
        <li>
          Press light on/off paddle on IWD600S
        </li>
      </ol>
    </td>
  </tr>
</table>

### Exclusion Information

  1. Place controller in exclusion mode
  2. Press light on/off paddle on IWD600S

## Channels

The following table summarises the channels available for the IWD600S -:

| Channel Name | Channel ID | Channel Type | Category | Item Type |
|--------------|------------|--------------|----------|-----------|
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer | 
| Scene Number | scene_number | scene_number |  | Number | 

### Dimmer
The brightness channel allows to control the brightness of a light.
            It is also possible to switch the light on and off.

The ```switch_dimmer``` channel is of type ```switch_dimmer``` and supports the ```Dimmer``` item and is in the ```DimmableLight``` category.

### Scene Number
Triggers when a scene button is pressed.

The ```scene_number``` channel is of type ```scene_number``` and supports the ```Number``` item.



## Device Configuration

The device has no configuration parameters defined.

## Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The IWD600S supports 1 association group.

### Group 1: Controller Updates


Association group 1 supports 1 node.

## Technical Information

### Endpoints

#### Endpoint 0

| Command Class | Comment |
|---------------|---------|
| COMMAND_CLASS_NO_OPERATION_V1| |
| COMMAND_CLASS_BASIC_V1| |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V1| Linked to BASIC|
| COMMAND_CLASS_SWITCH_ALL_V1| |
| COMMAND_CLASS_SCENE_ACTIVATION_V1| |
| COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1| |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| |
| COMMAND_CLASS_NODE_NAMING_V1| |
| COMMAND_CLASS_HAIL_V1| |
| COMMAND_CLASS_ASSOCIATION_V1| |
| COMMAND_CLASS_VERSION_V1| |

### Documentation Links

* [Monster  IWD 600S Installation Manual](https://opensmarthouse.org/zwavedatabase/982/reference/8500sd-1-.pdf)

---

Did you spot an error in the above definition or want to improve the content?
You can [contribute to the database here](https://opensmarthouse.org/zwavedatabase/982).