---
layout: documentation
title: HS1DS - ZWave
---

{% include base.html %}

# HS1DS Window / Door Sensor
This describes the Z-Wave device *HS1DS*, manufactured by *Z-Wave.Me* with the thing type UID of ```zwaveme_hs1ds_00_000```.

The device is in the category of *Window*, defining Window.

## Overview

No device information is provided in the database. Consider [updating the database](http://www.cd-jackson.com/index.php/zwave/zwave-device-database/zwave-device-list/devicesummary/783) to improve the documentation.

## Channels

The following table summarises the channels available for the HS1DS -:

| Channel | Channel Id | Category | Item Type |
|---------|------------|----------|-----------|
| Binary Sensor | sensor_door | Door | Contact | 
| Alarm (burglar) | alarm_burglar | Door | Switch | 
| Battery Level | battery-level | Battery | Number |

### Binary Sensor

Indicates if the door/window is open or closed.

The ```sensor_door``` channel supports the ```Contact``` item and is in the ```Door``` category. This is a read only channel so will only be updated following state changes from the device.

The following state translation is provided for this channel to the ```Contact``` item type -:

| Value | Label     |
|-------|-----------|
| OPEN | Open |
| CLOSED | Closed |

### Alarm (burglar)

Indicates if the burglar alarm is triggered.

The ```alarm_burglar``` channel supports the ```Switch``` item and is in the ```Door``` category. This is a read only channel so will only be updated following state changes from the device.

The following state translation is provided for this channel to the ```Switch``` item type -:

| Value | Label     |
|-------|-----------|
| OFF | OK |
| ON | Alarm |

### Battery Level

Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.

The ```battery-level``` channel supports the ```Number``` item and is in the ```Battery``` category.



## Device Configuration

The device has no configuration parameters defined.

## Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The HS1DS supports 1 association group.

### Group 1: Controller Updates


Association group 1 supports 5 nodes.

## Technical Information

### Endpoints

#### Endpoint 0

| Command Class | Comment |
|---------------|---------|
| COMMAND_CLASS_SENSOR_BINARY_V2| Linked to BASIC|
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1| |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1| |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1| |
| COMMAND_CLASS_ALARM_V4| |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| |
| COMMAND_CLASS_POWERLEVEL_V1| |
| COMMAND_CLASS_BATTERY_V1| |
| COMMAND_CLASS_WAKE_UP_V2| |
| COMMAND_CLASS_ASSOCIATION_V2| |
| COMMAND_CLASS_VERSION_V2| |

### Documentation Links

* [Manual](https://www.cd-jackson.com/zwave_device_uploads/783/HSIDS-Z.pdf)

---

Did you spot an error in the above definition or want to improve the content?
You can [contribute to the database here](http://www.cd-jackson.com/index.php/zwave/zwave-device-database/zwave-device-list/devicesummary/783).