---
layout: documentation
title: MH10-PM2.5-WA - ZWave
---

{% include base.html %}

# MH10-PM2.5-WA PM2.5 Monitor
This describes the Z-Wave device *MH10-PM2.5-WA*, manufactured by *[McoHome Technology Co., Ltd](http://www.mcohome.com/)* with the thing type UID of ```mcohome_mh10pm25wa_00_000```.

The device is in the category of *Sensor*, defining Device used to measure something.

![MH10-PM2.5-WA product image](https://www.cd-jackson.com/zwave_device_uploads/244/244_default.png)


The MH10-PM2.5-WA supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers.  This device is also able to participate in the routing of data between other devices in the mesh network.

## Overview

No device information is provided in the database. Consider [updating the database](http://www.cd-jackson.com/index.php/zwave/zwave-device-database/zwave-device-list/devicesummary/244) to improve the documentation.

## Channels

The following table summarises the channels available for the MH10-PM2.5-WA -:

| Channel | Channel Id | Category | Item Type |
|---------|------------|----------|-----------|
| Sensor (relative humidity) | sensor_relhumidity | Humidity | Number | 
| Sensor (particulate) | sensor_particulate |  | Number | 
| Sensor (temperature) | sensor_temperature | Temperature | Number:Temperature | 

### Sensor (relative humidity)

Indicates the current relative humidity.

The ```sensor_relhumidity``` channel supports the ```Number``` item and is in the ```Humidity``` category. This is a read only channel so will only be updated following state changes from the device.

### Sensor (particulate)

Indicates the level of particulate matter.

The ```sensor_particulate``` channel supports the ```Number``` item. This is a read only channel so will only be updated following state changes from the device.

### Sensor (temperature)

Indicates the current temperature.

The ```sensor_temperature``` channel supports the ```Number:Temperature``` item and is in the ```Temperature``` category.



## Device Configuration

The device has no configuration parameters defined.

## Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The MH10-PM2.5-WA supports 1 association group.

### Group 1: Group 1


Association group 1 supports 5 nodes.

## Technical Information

### Endpoints

#### Endpoint 0

| Command Class | Comment |
|---------------|---------|
| COMMAND_CLASS_NO_OPERATION_V1| |
| COMMAND_CLASS_BASIC_V1| |
| COMMAND_CLASS_SENSOR_MULTILEVEL_V5| Linked to BASIC|
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| |
| COMMAND_CLASS_ASSOCIATION_V1| |
| COMMAND_CLASS_VERSION_V1| |

### Documentation Links

* [User Manual](https://www.cd-jackson.com/zwave_device_uploads/244/MH10-PM2-5-UM.pdf)

---

Did you spot an error in the above definition or want to improve the content?
You can [contribute to the database here](http://www.cd-jackson.com/index.php/zwave/zwave-device-database/zwave-device-list/devicesummary/244).