--- layout: documentation title: HA18 - ZWave --- {% include base.html %} # HA18 15-amp Wall Switch This describes the Z-Wave device *HA18 *, manufactured by *Intermatic* with the thing type UID of ```intermatic_ha18_00_000```. The device is in the category of *Wall Switch*, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch. ![HA18 product image](https://www.cd-jackson.com/zwave_device_uploads/874/874_default.jpg) The HA18 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network. ## Overview 15-amp Z-Wave Wall Switch. ### Inclusion Information Press and release the top or bottom ROCKER button of the HA18 In-Wall Switch. ### Exclusion Information Press and release the top or bottom ROCKER button of the HA18 In-Wall Switch. ## Channels The following table summarises the channels available for the HA18 -: | Channel | Channel Id | Category | Item Type | |---------|------------|----------|-----------| | Switch | switch_binary | Switch | Switch | ### Switch Switch the power on and off. The ```switch_binary``` channel supports the ```Switch``` item and is in the ```Switch``` category. ## Device Configuration The device has no configuration parameters defined. ## Association Groups Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic. The device does not support associations. ## Technical Information ### Endpoints #### Endpoint 0 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_NO_OPERATION_V1| | | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SWITCH_BINARY_V1| Linked to BASIC| | COMMAND_CLASS_SWITCH_ALL_V1| | | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| | | COMMAND_CLASS_POWERLEVEL_V1| | | COMMAND_CLASS_ASSOCIATION_V1| | | COMMAND_CLASS_VERSION_V1| | ### Documentation Links * [Intermatic HA18 Manual](https://www.cd-jackson.com/zwave_device_uploads/874/HA18-manual.pdf) --- Did you spot an error in the above definition or want to improve the content? You can [contribute to the database here](http://www.cd-jackson.com/index.php/zwave/zwave-device-database/zwave-device-list/devicesummary/874).