--- layout: documentation title: 39358 - ZWave --- {% include base.html %} # 39358 Z-Wave In-Wall Smart Fan Control This describes the Z-Wave device *39358*, manufactured by *Honeywell* with the thing type UID of ```honeywell_39358_00_000```. The device is in the category of *Wall Switch*, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch. ![39358 product image](https://www.cd-jackson.com/zwave_device_uploads/861/861_default.jpg) The 39358 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network. ## Overview ## Smart solutions Stay connected to your home with a Honeywell In-Wall Smart Fan Control Switch. Compatible with all Z‑Wave certified gateways, the smart fan switch gives you wireless control of your ceiling fans from any mobile device, computer or Z-Wave enabled remote. Installation is easy – simply replace a standard in-wall switch with the smart fan switch. Whether you’re at home or away, access the switch to choose among 3 different speed settings, or to turn your fan on and off. The rocker-style switch includes white and light almond switch covers to match any decor and features a blue LED indicator light to locate the switch in a dark room. Your smart home just got smarter with the Honeywell In-Wall Smart Fan Control Switch. Model Number: 39358 ## Product Features * Wirelessly control schedule from anywhere * 3 speed fan control (High, Medium, Low) * Rocker-style switch * White and light almond switch covers * Add-on compatible (3-way, 4-way, 5-way)  ## Product Specifications * Brand: Honeywell * Model Number: 39358 * Z-Wave Cert Number: ZC10-17125903 ## References * http://www.z-wave.com/shop-z-wave-smart-home-products/smart-fan-control-honeywell-honeywell-z-wave-in-wall-3-speed-fan-control-paddle * https://byjasco.com/products/honeywell-z-wave-plus-wall-smart-fan-control * https://www.amazon.com/dp/B07B3Y7YK5/ ### Inclusion Information ### CONNECTING YOUR DEVICE TO A Z-WAVE NETWORK 1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network. 2. Once the controller is ready to add your device, press and release the top or bottom of the wireless smart fan control (rocker) to add it in the network. Now you have complete control to turn your fixture ON/OFF according to groups, scenes, schedules and interactive automations programmed by your controller. If your Z-Wave certified controller features remote access, you can now control your fixture from your mobile devices.  ### Exclusion Information ### REMOVING AND RESETTING THE DEVICE 1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network. 2. Once the controller is ready to remove your device, press and release the top or bottom of the wireless smart fan control (rocker) to remove it from the network. ### RETURNING SWITCH TO FACTORY DEFAULTS Quickly press ON (Top) button three (3) times then immediately press the OFF (Bottom) button three (3) times. The LED will flash ON/OFF 5 times when completed successfully. **Note:** This should only be used in the event your network’s primary controller is missing or otherwise inoperable. ## Channels The following table summarises the channels available for the 39358 -: | Channel | Channel Id | Category | Item Type | |---------|------------|----------|-----------| | Dimmer | switch_dimmer | DimmableLight | Dimmer | | Scene Number | scene_number | | Number | ### Dimmer The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off. The ```switch_dimmer``` channel supports the ```Dimmer``` item and is in the ```DimmableLight``` category. ### Scene Number Triggers when a scene button is pressed. The ```scene_number``` channel supports the ```Number``` item. ## Device Configuration The device has no configuration parameters defined. ## Association Groups Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic. The 39358 supports 1 association group. ### Group 1: Lifeline The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation. Lifeline, Multilevel Switch Support Association group 1 supports 5 nodes. ## Technical Information ### Endpoints #### Endpoint 0 | Command Class | Comment | |---------------|---------| | COMMAND_CLASS_NO_OPERATION_V1| | | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SWITCH_MULTILEVEL_V1| | | COMMAND_CLASS_SWITCH_ALL_V1| | | COMMAND_CLASS_SCENE_ACTIVATION_V1| | | COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1| | | COMMAND_CLASS_CRC_16_ENCAP_V1| | | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1| | | COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1| | | COMMAND_CLASS_ZWAVEPLUS_INFO_V1| | | COMMAND_CLASS_CONFIGURATION_V1| | | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| | | COMMAND_CLASS_POWERLEVEL_V1| | | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1| | | COMMAND_CLASS_ASSOCIATION_V2| | | COMMAND_CLASS_VERSION_V2| | ### Documentation Links * [PDF manual](https://www.cd-jackson.com/zwave_device_uploads/861/Quick-start-guide-Honeywell-Z-Wave-In-Wall-3-Speed-Fan-Control--Paddle-.pdf) --- Did you spot an error in the above definition or want to improve the content? You can [contribute to the database here](http://www.cd-jackson.com/index.php/zwave/zwave-device-database/zwave-device-list/devicesummary/861).