---
layout: documentation
title: LSM-15 - ZWave
---

{% include base.html %}

# LSM-15 Wall Mounted Switch
This describes the Z-Wave device *LSM-15*, manufactured by *Evolve* with the thing type UID of ```evolve_lsm15_00_000```.

The device is in the category of *Wall Switch*, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.

![LSM-15 product image](https://www.cd-jackson.com/zwave_device_uploads/318/318_default.jpg)


The LSM-15 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers.  This device is also able to participate in the routing of data between other devices in the mesh network.

## Overview

No device information is provided in the database. Consider [updating the database](http://www.cd-jackson.com/index.php/zwave/zwave-device-database/zwave-device-list/devicesummary/318) to improve the documentation.

## Channels

The following table summarises the channels available for the LSM-15 -:

| Channel | Channel Id | Category | Item Type |
|---------|------------|----------|-----------|
| Switch | switch_binary | Switch | Switch | 
| Dimmer | switch_dimmer | DimmableLight | Dimmer | 
| Scene Number | scene_number |  | Number | 

### Switch

Switch the power on and off.

The ```switch_binary``` channel supports the ```Switch``` item and is in the ```Switch``` category.

### Dimmer

The brightness channel allows to control the brightness of a light.
            It is also possible to switch the light on and off.

The ```switch_dimmer``` channel supports the ```Dimmer``` item and is in the ```DimmableLight``` category.

### Scene Number

Triggers when a scene button is pressed.

The ```scene_number``` channel supports the ```Number``` item.



## Device Configuration

The following table provides a summary of the 2 configuration parameters available in the LSM-15.
Detailed information on each parameter can be found in the sections below.

| Param | Name  | Description |
|-------|-------|-------------|
| 3 | Night Light | By default, the LED will turn OFF when the lead attached is turned ON. |
| 4 | Invert Switch | To change the top of the switch to OFF and the bottom of the switch ON. |
|  | Switch All Mode | Set the mode for the switch when receiving SWITCH ALL commands |

### Parameter 3: Night Light

By default, the LED will turn OFF when the lead attached is turned ON.

The following option values may be configured -:

| Value  | Description |
|--------|-------------|
| 0 | On when load is on |
| 1 | Off when load is on |

The manufacturer defined default value is ```1``` (Off when load is on).

This parameter has the configuration ID ```config_3_1``` and is of type ```INTEGER```.


### Parameter 4: Invert Switch

To change the top of the switch to OFF and the bottom of the switch ON.

The following option values may be configured -:

| Value  | Description |
|--------|-------------|
| 0 | Top-ON, Bottom-OFF |
| 1 | Bottom--ON, Top-OFF |

The manufacturer defined default value is ```0``` (Top-ON, Bottom-OFF).

This parameter has the configuration ID ```config_4_1``` and is of type ```INTEGER```.

### Switch All Mode

Set the mode for the switch when receiving SWITCH ALL commands.

The following option values may be configured -:
| Value  | Description |
|--------|-------------|
| 0 | Exclude from All On and All Off groups |
| 1 | Include in All On group |
| 2 | Include in All Off group |
| 255 | Include in All On and All Off groups |

This parameter has the configuration ID ```switchall_mode``` and is of type ```INTEGER```.


## Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The device does not support associations.
## Technical Information

### Endpoints

#### Endpoint 0

| Command Class | Comment |
|---------------|---------|
| COMMAND_CLASS_NO_OPERATION_V1| |
| COMMAND_CLASS_BASIC_V1| |
| COMMAND_CLASS_SWITCH_BINARY_V1| |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V1| |
| COMMAND_CLASS_SWITCH_ALL_V1| |
| COMMAND_CLASS_SCENE_ACTIVATION_V1| |
| COMMAND_CLASS_MULTI_CHANNEL_V1| |
| COMMAND_CLASS_CONFIGURATION_V1| |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| |
| COMMAND_CLASS_VERSION_V1| |

### Documentation Links

* [Product Overview](https://www.cd-jackson.com/zwave_device_uploads/318/LSM-15-Binary-Switch.pdf)

---

Did you spot an error in the above definition or want to improve the content?
You can [contribute to the database here](http://www.cd-jackson.com/index.php/zwave/zwave-device-database/zwave-device-list/devicesummary/318).