---
layout: documentation
title: ES800ZWE - ZWave
---

{% include base.html %}

# ES800ZWE Z-Wave extender
This describes the Z-Wave device *ES800ZWE*, manufactured by *Essence Security* with the thing type UID of ```essence_es800zwe_00_000```.

The device is in the category of *Battery*, defining Batteries, Energy Storages.

![ES800ZWE product image](https://www.cd-jackson.com/zwave_device_uploads/936/936_default.png)


The ES800ZWE supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers.  This device is also able to participate in the routing of data between other devices in the mesh network.

## Overview

The Z-Wave Plus Extender incorporates third party Z-Wave devices into WeR@Home™, integrating home automation and control functions with the core WeR@Home™ system.

Features include:

  * Single-element, compact Z-Wave Plus controller
  * Allows Z-Wave devices to be added as seamlessly integrated elements in WeR@Home™.
  * Enables support for Smart Devices such as: 
      * Light switches (on/off and dimmer)
      * Thermostats
      * Door locks
      * Power strips
      * Multi-colored (RGBW) LED bulbs
  * Powered by the WeR@Home™ hub
  * Simple and fast pairing process

### Inclusion Information

If you have an existing third-party Z-Wave network, WeR@Home™ can join the network. WeR@Home™ enters "learn" mode on the existing network to automatically copy the existing network's Smart Home network structure. When you join a Z-Wave network, you have access to the Z-Wave devices supported by WeR@Home™. The Z-Wave Plus Extender is assigned one of the following roles depending on the third-party controller capabilities:

  * **Secondary (inclusion)** - allowed to add or delete additional Z-Wave devices
  * **Secondary** –not allowed to add or delete additional Z-Wave devices

To join an existing third-party Z-Wave network:

  1. Remove all Z-Wave devices from your WeR@Home™, except for your Z-Wave Plus Extender. Refer to 5.5 Removing a Z-Wave Device on page 14.
  2. In the WeR@Home™ app, tap "menu" The main menu appears.
  3. Tap "Devices". The Devicesscreen appears.
  4. Tap the gear icon for your Z-Wave Plus Extender. The Z-Wave Controller configuration screen appears.
  5. Put the primary controller of the existing network into Add mode, according to the controller’s user manual.
  6. Tap Join Existing Network. All Z-Wave devices are removed from WeR@Home™. WeR@Home™ copies the topology of the existing network and prompts you to enter the name for the existing network controller.
  7. Enter the name for the existing network controller and tap OK.

### Exclusion Information

If your Z-Wave Plus Extender role is Secondary or Secondary (inclusion), you can remove your Z-Wave Plus Extender from the existing third-party network.

_**Caution:** Removing the Z-Wave Plus Extender from the existing network, removes connection to all Z-Wave devices from the Z-Wave Plus Extender._

To remove your Z-Wave Plus Extender from the existing network:

  1. In the WeR@Home™ app, tap . The main menu appears.
  2. Tap Devices. The Devicesscreen appears.
  3. Tap the gear icon for your Z-Wave Plus Extender. The Z-Wave Controller configuration screen appears.
  4. Tap Role. The Role screen appears.
  5. Put the primary controller of the existing network into Remove mode, according to the controller’s user manual.
  6. Tap Exclude Network. A confirmation window appears.
  7. Tap OK. The third-party controller and its devices are removed.

## Channels

The following table summarises the channels available for the ES800ZWE -:

| Channel | Channel Id | Category | Item Type |
|---------|------------|----------|-----------|



## Device Configuration

The device has no configuration parameters defined.

## Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The device does not support associations.
## Technical Information

### Endpoints

#### Endpoint 0

| Command Class | Comment |
|---------------|---------|
| COMMAND_CLASS_NO_OPERATION_V1| |
| COMMAND_CLASS_BASIC_V1| |
| COMMAND_CLASS_APPLICATION_STATUS_V1| |
| COMMAND_CLASS_CRC_16_ENCAP_V1| |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1| |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1| |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1| |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| |
| COMMAND_CLASS_POWERLEVEL_V1| |
| COMMAND_CLASS_ASSOCIATION_V2| |
| COMMAND_CLASS_VERSION_V2| |
| COMMAND_CLASS_SECURITY_V1| |

### Documentation Links

* [Data sheet](https://www.cd-jackson.com/zwave_device_uploads/936/wer-home-zwave-extender.pdf)
* [User Guide](https://www.cd-jackson.com/zwave_device_uploads/936/wer-home-zwave-user-guide.pdf)

---

Did you spot an error in the above definition or want to improve the content?
You can [contribute to the database here](http://www.cd-jackson.com/index.php/zwave/zwave-device-database/zwave-device-list/devicesummary/936).