---
layout: documentation
title: EV100 - ZWave
---

{% include base.html %}

# EV100 Z-Vent ZWave Controlled HVAC Air Register
This describes the Z-Wave device *EV100*, manufactured by *EcoNet Controls* with the thing type UID of ```econet_ev100_00_000```.

![EV100 product image](https://www.cd-jackson.com/zwave_device_uploads/564/564_default.png)


The EV100 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers.  This device is unable to participate in the routing of data from other devices.

## Overview

No device information is provided in the database. Consider [updating the database](http://www.cd-jackson.com/index.php/zwave/zwave-device-database/zwave-device-list/devicesummary/564) to improve the documentation.

## Channels

The following table summarises the channels available for the EV100 -:

| Channel | Channel Id | Category | Item Type |
|---------|------------|----------|-----------|
| Dimmer | switch_dimmer | DimmableLight | Dimmer | 
| Battery Level | battery-level | Battery | Number |

### Dimmer

The brightness channel allows to control the brightness of a light.
            It is also possible to switch the light on and off.

The ```switch_dimmer``` channel supports the ```Dimmer``` item and is in the ```DimmableLight``` category.

### Battery Level

Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.

The ```battery-level``` channel supports the ```Number``` item and is in the ```Battery``` category.



## Device Configuration

The device has no configuration parameters defined.

## Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The device does not support associations.
## Technical Information

### Endpoints

#### Endpoint 0

| Command Class | Comment |
|---------------|---------|
| COMMAND_CLASS_NO_OPERATION_V1| |
| COMMAND_CLASS_BASIC_V1| |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V3| Linked to BASIC|
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| |
| COMMAND_CLASS_NODE_NAMING_V1| |
| COMMAND_CLASS_BATTERY_V1| |
| COMMAND_CLASS_VERSION_V1| |

### Documentation Links

* [Quick Start Guide](https://www.cd-jackson.com/zwave_device_uploads/564/EcoNet-EV100-Vent.pdf)

---

Did you spot an error in the above definition or want to improve the content?
You can [contribute to the database here](http://www.cd-jackson.com/index.php/zwave/zwave-device-database/zwave-device-list/devicesummary/564).