---
layout: documentation
title: WD-100 - ZWave
---

{% include base.html %}

# WD-100 Wall Dimmer Switch
This describes the Z-Wave device *WD-100*, manufactured by *Dragon Tech Industrial, Ltd.* with the thing type UID of ```dragontech_wd100_00_000```.

![WD-100 product image](https://www.cd-jackson.com/zwave_device_uploads/243/243_default.jpg)


The WD-100 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers.  This device is also able to participate in the routing of data between other devices in the mesh network.

## Overview

No device information is provided in the database. Consider [updating the database](http://www.cd-jackson.com/index.php/zwave/zwave-device-database/zwave-device-list/devicesummary/243) to improve the documentation.

## Channels

The following table summarises the channels available for the WD-100 -:

| Channel | Channel Id | Category | Item Type |
|---------|------------|----------|-----------|
| Dimmer | switch_dimmer | DimmableLight | Dimmer | 
| Scene Number | scene_number |  | Number | 

### Dimmer

The brightness channel allows to control the brightness of a light.
            It is also possible to switch the light on and off.

The ```switch_dimmer``` channel supports the ```Dimmer``` item and is in the ```DimmableLight``` category.

### Scene Number

Triggers when a scene button is pressed.

The ```scene_number``` channel supports the ```Number``` item.



## Device Configuration

The following table provides a summary of the 3 configuration parameters available in the WD-100.
Detailed information on each parameter can be found in the sections below.

| Param | Name  | Description |
|-------|-------|-------------|
| 4 | Orientation | Controls the on/off orientation of the rocker switch |
| 9 | Dim Level Increment | Indicates the number of levels (1-99) to change dimming each step |
| 10 | Step Duration | The number of tens of milliseconds (1-255) to delay on each dimming step. |
|  | Switch All Mode | Set the mode for the switch when receiving SWITCH ALL commands |

### Parameter 4: Orientation

Controls the on/off orientation of the rocker switch

The following option values may be configured -:

| Value  | Description |
|--------|-------------|
| 0 | Normal |
| 1 | Inverted |

The manufacturer defined default value is ```0``` (Normal).

This parameter has the configuration ID ```config_4_1``` and is of type ```INTEGER```.


### Parameter 9: Dim Level Increment

Indicates the number of levels (1-99) to change dimming each step

Values in the range 0 to 255 may be set.

The manufacturer defined default value is ```1```.

This parameter has the configuration ID ```config_9_1``` and is of type ```INTEGER```.


### Parameter 10: Step Duration

The number of tens of milliseconds (1-255) to delay on each dimming step.

Values in the range 0 to 255 may be set.

The manufacturer defined default value is ```3```.

This parameter has the configuration ID ```config_10_1``` and is of type ```INTEGER```.

### Switch All Mode

Set the mode for the switch when receiving SWITCH ALL commands.

The following option values may be configured -:
| Value  | Description |
|--------|-------------|
| 0 | Exclude from All On and All Off groups |
| 1 | Include in All On group |
| 2 | Include in All Off group |
| 255 | Include in All On and All Off groups |

This parameter has the configuration ID ```switchall_mode``` and is of type ```INTEGER```.


## Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The WD-100 supports 1 association group.

### Group 1: Group 1


Association group 1 supports 5 nodes.

## Technical Information

### Endpoints

#### Endpoint 0

| Command Class | Comment |
|---------------|---------|
| COMMAND_CLASS_NO_OPERATION_V1| |
| COMMAND_CLASS_BASIC_V1| |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V1| Linked to BASIC|
| COMMAND_CLASS_SWITCH_ALL_V1| |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1| |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1| |
| COMMAND_CLASS_CENTRAL_SCENE_V1| |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1| |
| COMMAND_CLASS_CONFIGURATION_V1| |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| |
| COMMAND_CLASS_POWERLEVEL_V1| |
| COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1| |
| COMMAND_CLASS_ASSOCIATION_V1| |
| COMMAND_CLASS_VERSION_V1| |

### Documentation Links

* [User Manual](https://www.cd-jackson.com/zwave_device_uploads/243/WD100-manual.pdf)
* [User Manual](https://www.cd-jackson.com/zwave_device_uploads/243/HS-WD100-Manual-v1-1a.pdf)

---

Did you spot an error in the above definition or want to improve the content?
You can [contribute to the database here](http://www.cd-jackson.com/index.php/zwave/zwave-device-database/zwave-device-list/devicesummary/243).