---
layout: documentation
title: SW-ZCS-1 - ZWave
---

{% include base.html %}

# SW-ZCS-1 Cord Switch
This describes the Z-Wave device *SW-ZCS-1*, manufactured by *CBCC Domotique SAS* with the thing type UID of ```cbcc_swzcs1_00_000```.

The device is in the category of *Wall Switch*, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.

![SW-ZCS-1 product image](https://www.cd-jackson.com/zwave_device_uploads/236/236_default.jpg)


The SW-ZCS-1 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers.  This device is also able to participate in the routing of data between other devices in the mesh network.

## Overview

No device information is provided in the database. Consider [updating the database](http://www.cd-jackson.com/index.php/zwave/zwave-device-database/zwave-device-list/devicesummary/236) to improve the documentation.

## Channels

The following table summarises the channels available for the SW-ZCS-1 -:

| Channel | Channel Id | Category | Item Type |
|---------|------------|----------|-----------|
| Switch | switch_binary | Switch | Switch | 

### Switch

Switch the power on and off.

The ```switch_binary``` channel supports the ```Switch``` item and is in the ```Switch``` category.



## Device Configuration

The following table provides a summary of the 1 configuration parameters available in the SW-ZCS-1.
Detailed information on each parameter can be found in the sections below.

| Param | Name  | Description |
|-------|-------|-------------|
| 1 | Switch All |  |
|  | Switch All Mode | Set the mode for the switch when receiving SWITCH ALL commands |

### Parameter 1: Switch All



The following option values may be configured -:

| Value  | Description |
|--------|-------------|
| 0 | Disabled |
| 1 | Switch on only |
| 2 | Switch off only |
| 255 | Fully enabled (Default) |

The manufacturer defined default value is ```255``` (Fully enabled (Default)).

This parameter has the configuration ID ```config_1_1``` and is of type ```INTEGER```.

### Switch All Mode

Set the mode for the switch when receiving SWITCH ALL commands.

The following option values may be configured -:
| Value  | Description |
|--------|-------------|
| 0 | Exclude from All On and All Off groups |
| 1 | Include in All On group |
| 2 | Include in All Off group |
| 255 | Include in All On and All Off groups |

This parameter has the configuration ID ```switchall_mode``` and is of type ```INTEGER```.


## Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The SW-ZCS-1 supports 2 association groups.

### Group 1: Group 1


Association group 1 supports 5 nodes.

### Group 2: Group 2


Association group 2 supports 5 nodes.

## Technical Information

### Endpoints

#### Endpoint 0

| Command Class | Comment |
|---------------|---------|
| COMMAND_CLASS_NO_OPERATION_V1| |
| COMMAND_CLASS_BASIC_V1| |
| COMMAND_CLASS_SWITCH_BINARY_V1| Linked to BASIC|
| COMMAND_CLASS_SWITCH_ALL_V1| |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| |
| COMMAND_CLASS_ASSOCIATION_V1| |
| COMMAND_CLASS_VERSION_V1| |

### Documentation Links

* [NodON Wall Switch User Guide](https://www.cd-jackson.com/zwave_device_uploads/236/NodOn-WallSwitch-ZWave-UserGuide-EN-2.pdf)

---

Did you spot an error in the above definition or want to improve the content?
You can [contribute to the database here](http://www.cd-jackson.com/index.php/zwave/zwave-device-database/zwave-device-list/devicesummary/236).