---
layout: documentation
title: DSD37 - ZWave
---

{% include base.html %}

# DSD37 Range Extender
This describes the Z-Wave device *DSD37*, manufactured by *[AEON Labs](http://aeotec.com/)* with the thing type UID of ```aeon_dsd37_00_000```.

![DSD37 product image](https://www.cd-jackson.com/zwave_device_uploads/66/66_default.jpg)


The DSD37 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers.  This device is also able to participate in the routing of data between other devices in the mesh network.

## Overview

No device information is provided in the database. Consider [updating the database](http://www.cd-jackson.com/index.php/zwave/zwave-device-database/zwave-device-list/devicesummary/66) to improve the documentation.

## Channels

The following table summarises the channels available for the DSD37 -:

| Channel | Channel Id | Category | Item Type |
|---------|------------|----------|-----------|



## Device Configuration

The following table provides a summary of the 3 configuration parameters available in the DSD37.
Detailed information on each parameter can be found in the sections below.

| Param | Name  | Description |
|-------|-------|-------------|
| 200 | Partner ID | Partner ID |
| 254 | Device Tag | When Repeater removed from z-wave network, Device Tag will not change |
| 255 | Reset configuration settings to default values | Reset configuration settings to default values, except parameter is 254 |

### Parameter 200: Partner ID

Partner ID

The following option values may be configured -:

| Value  | Description |
|--------|-------------|
| 0 | Aeon Labs’s Standard Product |
| 1 | AT&T |
| 2 | Jean |
| 3 | Telefonica |
| 4 | Reserved for other Partner |

The manufacturer defined default value is ```0``` (Aeon Labs’s Standard Product).

This parameter has the configuration ID ```config_200_1``` and is of type ```INTEGER```.


### Parameter 254: Device Tag

When Repeater removed from z-wave network, Device Tag will not change

Values in the range 0 to 1 may be set.

The manufacturer defined default value is ```0```.

This parameter has the configuration ID ```config_254_2``` and is of type ```INTEGER```.


### Parameter 255: Reset configuration settings to default values

Reset configuration settings to default values, except parameter is 254

Values in the range 0 to 1 may be set.

The manufacturer defined default value is ```0```.

This parameter has the configuration ID ```config_255_1``` and is of type ```INTEGER```.


## Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The DSD37 supports 1 association group.

### Group 1: Group 1


Association group 1 supports 5 nodes.

## Technical Information

### Endpoints

#### Endpoint 0

| Command Class | Comment |
|---------------|---------|
| COMMAND_CLASS_NO_OPERATION_V1| |
| COMMAND_CLASS_BASIC_V1| |
| COMMAND_CLASS_CONFIGURATION_V1| |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| |
| COMMAND_CLASS_POWERLEVEL_V1| |
| COMMAND_CLASS_ASSOCIATION_V1| |
| COMMAND_CLASS_VERSION_V1| |

### Documentation Links

* [User Manual](https://www.cd-jackson.com/zwave_device_uploads/66/20-Range-Extender--Repeater-.pdf)
* [Engineering Manual](https://www.cd-jackson.com/zwave_device_uploads/66/z-wave-plus-aeotec-range-extender-engineering-sheet.pdf)

---

Did you spot an error in the above definition or want to improve the content?
You can [contribute to the database here](http://www.cd-jackson.com/index.php/zwave/zwave-device-database/zwave-device-list/devicesummary/66).