Updated external content (Jenkins build 994)
openHAB Build Server
parent
b6cb038531
commit
f6b3d9fc6b
|
|
@ -81,11 +81,22 @@ Some notes:
|
|||
* You can get around this by adding the `openhab` user to the `dialout` group like this: `usermod -a -G dialout openhab`.
|
||||
* Also on Linux you may have issues with the USB if using two serial USB devices e.g. Oppo and RFXcom.
|
||||
* See the [general documentation about serial port configuration](/docs/administration/serial.html) for more on symlinking the USB ports.
|
||||
* Here is an example of ser2net.conf you can use to share your serial port /dev/ttyUSB0 on IP port 4444 using [ser2net Linux tool](https://sourceforge.net/projects/ser2net/) (take care, the baud rate is specific to the Oppo player):
|
||||
* Here is an example of ser2net.conf (for ser2net version < 4) you can use to share your serial port /dev/ttyUSB0 on IP port 4444 using [ser2net Linux tool](https://sourceforge.net/projects/ser2net/) (take care, the baud rate is specific to the Oppo player):
|
||||
|
||||
```
|
||||
4444:raw:0:/dev/ttyUSB0:9600 8DATABITS NONE 1STOPBIT LOCAL
|
||||
```
|
||||
* Here is an example of ser2net.yaml (for ser2net version >= 4) you can use to share your serial port /dev/ttyUSB0 on IP port 4444 using [ser2net Linux tool](https://sourceforge.net/projects/ser2net/) (take care, the baud rate is specific to the Oppo player):
|
||||
```
|
||||
connection: &conOppo
|
||||
accepter: tcp,4444
|
||||
enable: on
|
||||
options:
|
||||
kickolduser: true
|
||||
connector: serialdev,
|
||||
/dev/ttyUSB0,
|
||||
9600n81,local
|
||||
```
|
||||
|
||||
## Channels
|
||||
|
||||
|
|
|
|||
|
|
@ -264,7 +264,7 @@ The following devices have been tested by openHAB users with the binding. This l
|
|||
| Hue Bulbs | Color LED Bulb |
|
||||
| Hue Dimmer Switch | Remote RWL021 / RWL022 _[<sup>[2]</sup>](#note2)_ |
|
||||
| Hue Motion Sensor | Motion and Luminance sensor |
|
||||
| IKEA Fyrtur Blinds | Roller blinds |
|
||||
| IKEA Fyrtur Blinds | Roller blinds. See [forum tutorial](https://community.openhab.org/t/ikea-fyrtur-zigbee-w-direct-control-howto/136735) for further information |
|
||||
| IKEA Tradfri Bulbs | |
|
||||
| IKEA Tradfri Motion Sensor | |
|
||||
| IKEA Tradfri Outlet | |
|
||||
|
|
@ -304,6 +304,7 @@ The following devices have been tested by openHAB users with the binding. This l
|
|||
| Xiaomi Aqara Door and Window Sensor | _[Known issues](#xiaomi-devices)_ |
|
||||
| Xiaomi Aqara Temperature and Humidity Sensor | _[Known issues](#xiaomi-devices)_ |
|
||||
| Xiaomi Aqara Human Motion Sensor | _[<sup>[3]</sup>](#note3)_ _[Known issues](#xiaomi-devices)_ |
|
||||
| Xiaomi Aqara Wireless Mini Switch | WXKG11LM |
|
||||
| Xiaomi Aqara Wireless Mini Switch | _[Known issues](#xiaomi-devices)_ |
|
||||
| Xiaomi Aqara Wired Wall Switch | _[Known issues](#xiaomi-devices)_ |
|
||||
| Xiaomi Aqara Wireless Remote Switch | Double Rocker variant _[Known issues](#xiaomi-devices)_ |
|
||||
|
|
@ -517,6 +518,67 @@ A second part to the binding and reporting system is the reporting. The binding
|
|||
|
||||
The exact command required to configure reporting can depend on whether the attribute is a binary or analogue type. The console commands `subscribe` and `unsubscribe` allow the user to manipulate the reporting of an attribute, and the `reportcfg` command can be used to display the current configuration.
|
||||
|
||||
#### General Console Commands
|
||||
|
||||
| Command | Description |
|
||||
| ------------ | -------------------------------------------------------------------------------------- |
|
||||
| join | Enable or disable network join |
|
||||
| leave | Remove a node from the network |
|
||||
| nodelist | Lists the known nodes in the network |
|
||||
| node | Provides detailed information about a node |
|
||||
| endpoint | Provides detailed information about an endpoint |
|
||||
| info | Get basic info about a device |
|
||||
| identify | Sends the `identify` command to an endpoint |
|
||||
| fingerprint | Get detailed information about a device |
|
||||
| read | Read an attribute |
|
||||
| write | Write an attribute |
|
||||
| bind | Binds a device to another device |
|
||||
| unbind | Unbinds a device from another device |
|
||||
| bindtable | Reads and displays the binding table from a node |
|
||||
| attsupported | Check what attributes are supported within a cluster |
|
||||
| cmdsupported | Check what commanda are supported within a cluster |
|
||||
| subscribe | Subscribe to attribute reports |
|
||||
| unsubscribe | Unsubscribe from attribute reports |
|
||||
| reportcfg | Read the reporting configuration of an attribute |
|
||||
| otaupgrade | Provides information about device Over The Air upgrade server status |
|
||||
| installkey | Adds an install key to the dongle |
|
||||
| linkkey | Sets the link key int the dongle, optionally computing the MMO Hash from the join code |
|
||||
| netstart | Join or Form a network as a router or coordinator |
|
||||
| netbackup | Backup or restores the state of the dongle |
|
||||
| discovery | Gets information on the network discovery tasks |
|
||||
| routingtable | Gets the routing table from a node |
|
||||
| neighbours | Gets the neighbour table from a node |
|
||||
| on | Turns a device on |
|
||||
| off | Turns a device off |
|
||||
| level | Sets the level on a level control device |
|
||||
| color | Sets the color on a color control device |
|
||||
| covering | Sets the level on a window covering device |
|
||||
| group | Configures multicast groups |
|
||||
| scene | Configures scenes |
|
||||
| factoryreset | Resets a node to factory defaults |
|
||||
|
||||
#### Ember NCP Commands
|
||||
|
||||
The following commands are available if the transport layer is using the Silabs Ember NCP.
|
||||
|
||||
| Command | Description |
|
||||
| ---------------- | ----------------------------------------------------------------------------- |
|
||||
| ncpchildren | Gets the NCP child information |
|
||||
| ncpaddrtable | Manages the NCP address table |
|
||||
| ncpconfig | Read or write an NCP configuration value |
|
||||
| ncpscan | Performs a scan, looking for other networks, or energy levels on each channel |
|
||||
| ncpcounters | Gets the NCP debug counters |
|
||||
| ncpstate | Gets the NCP network state and optionally brings the network up or down |
|
||||
| ncpvalue | Read or write an NCP memory value |
|
||||
| ncpversion | Gets the NCP firmware version |
|
||||
| ncpsecuritystate | Gets the current NCP security state and configuration |
|
||||
| ncptransientkey | Adds a transient link key to the NCP |
|
||||
| ncpmmohash | Uses the NCP to perform the MMO hash |
|
||||
| ncprouting | Prints the NCP routing tables and information |
|
||||
| ncpmcast | Read and configure NCP multicast group table |
|
||||
| ncppolicy | REad and write NCP policies |
|
||||
| ncptoken | Reads and writes manufacturing tokens in the NCP |
|
||||
|
||||
## Known issues
|
||||
|
||||
### Xiaomi devices
|
||||
|
|
|
|||
|
|
@ -279,7 +279,7 @@ The following devices have been tested by openHAB users with the binding. This l
|
|||
| Hue Bulbs | Color LED Bulb |
|
||||
| Hue Dimmer Switch | Remote RWL021 / RWL022 _[<sup>[2]</sup>](#note2)_ |
|
||||
| Hue Motion Sensor | Motion and Luminance sensor |
|
||||
| IKEA Fyrtur Blinds | Roller blinds |
|
||||
| IKEA Fyrtur Blinds | Roller blinds. See [forum tutorial](https://community.openhab.org/t/ikea-fyrtur-zigbee-w-direct-control-howto/136735) for further information |
|
||||
| IKEA Tradfri Bulbs | |
|
||||
| IKEA Tradfri Motion Sensor | |
|
||||
| IKEA Tradfri Outlet | |
|
||||
|
|
@ -319,6 +319,7 @@ The following devices have been tested by openHAB users with the binding. This l
|
|||
| Xiaomi Aqara Door and Window Sensor | _[Known issues](#xiaomi-devices)_ |
|
||||
| Xiaomi Aqara Temperature and Humidity Sensor | _[Known issues](#xiaomi-devices)_ |
|
||||
| Xiaomi Aqara Human Motion Sensor | _[<sup>[3]</sup>](#note3)_ _[Known issues](#xiaomi-devices)_ |
|
||||
| Xiaomi Aqara Wireless Mini Switch | WXKG11LM |
|
||||
| Xiaomi Aqara Wireless Mini Switch | _[Known issues](#xiaomi-devices)_ |
|
||||
| Xiaomi Aqara Wired Wall Switch | _[Known issues](#xiaomi-devices)_ |
|
||||
| Xiaomi Aqara Wireless Remote Switch | Double Rocker variant _[Known issues](#xiaomi-devices)_ |
|
||||
|
|
@ -532,6 +533,67 @@ A second part to the binding and reporting system is the reporting. The binding
|
|||
|
||||
The exact command required to configure reporting can depend on whether the attribute is a binary or analogue type. The console commands `subscribe` and `unsubscribe` allow the user to manipulate the reporting of an attribute, and the `reportcfg` command can be used to display the current configuration.
|
||||
|
||||
#### General Console Commands
|
||||
|
||||
| Command | Description |
|
||||
| ------------ | -------------------------------------------------------------------------------------- |
|
||||
| join | Enable or disable network join |
|
||||
| leave | Remove a node from the network |
|
||||
| nodelist | Lists the known nodes in the network |
|
||||
| node | Provides detailed information about a node |
|
||||
| endpoint | Provides detailed information about an endpoint |
|
||||
| info | Get basic info about a device |
|
||||
| identify | Sends the `identify` command to an endpoint |
|
||||
| fingerprint | Get detailed information about a device |
|
||||
| read | Read an attribute |
|
||||
| write | Write an attribute |
|
||||
| bind | Binds a device to another device |
|
||||
| unbind | Unbinds a device from another device |
|
||||
| bindtable | Reads and displays the binding table from a node |
|
||||
| attsupported | Check what attributes are supported within a cluster |
|
||||
| cmdsupported | Check what commanda are supported within a cluster |
|
||||
| subscribe | Subscribe to attribute reports |
|
||||
| unsubscribe | Unsubscribe from attribute reports |
|
||||
| reportcfg | Read the reporting configuration of an attribute |
|
||||
| otaupgrade | Provides information about device Over The Air upgrade server status |
|
||||
| installkey | Adds an install key to the dongle |
|
||||
| linkkey | Sets the link key int the dongle, optionally computing the MMO Hash from the join code |
|
||||
| netstart | Join or Form a network as a router or coordinator |
|
||||
| netbackup | Backup or restores the state of the dongle |
|
||||
| discovery | Gets information on the network discovery tasks |
|
||||
| routingtable | Gets the routing table from a node |
|
||||
| neighbours | Gets the neighbour table from a node |
|
||||
| on | Turns a device on |
|
||||
| off | Turns a device off |
|
||||
| level | Sets the level on a level control device |
|
||||
| color | Sets the color on a color control device |
|
||||
| covering | Sets the level on a window covering device |
|
||||
| group | Configures multicast groups |
|
||||
| scene | Configures scenes |
|
||||
| factoryreset | Resets a node to factory defaults |
|
||||
|
||||
#### Ember NCP Commands
|
||||
|
||||
The following commands are available if the transport layer is using the Silabs Ember NCP.
|
||||
|
||||
| Command | Description |
|
||||
| ---------------- | ----------------------------------------------------------------------------- |
|
||||
| ncpchildren | Gets the NCP child information |
|
||||
| ncpaddrtable | Manages the NCP address table |
|
||||
| ncpconfig | Read or write an NCP configuration value |
|
||||
| ncpscan | Performs a scan, looking for other networks, or energy levels on each channel |
|
||||
| ncpcounters | Gets the NCP debug counters |
|
||||
| ncpstate | Gets the NCP network state and optionally brings the network up or down |
|
||||
| ncpvalue | Read or write an NCP memory value |
|
||||
| ncpversion | Gets the NCP firmware version |
|
||||
| ncpsecuritystate | Gets the current NCP security state and configuration |
|
||||
| ncptransientkey | Adds a transient link key to the NCP |
|
||||
| ncpmmohash | Uses the NCP to perform the MMO hash |
|
||||
| ncprouting | Prints the NCP routing tables and information |
|
||||
| ncpmcast | Read and configure NCP multicast group table |
|
||||
| ncppolicy | REad and write NCP policies |
|
||||
| ncptoken | Reads and writes manufacturing tokens in the NCP |
|
||||
|
||||
## Known issues
|
||||
|
||||
### Xiaomi devices
|
||||
|
|
|
|||
Loading…
Reference in New Issue