OpenHAB
/
openhab-docs
mirror of https://github.com/openhab/openhab-docs.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

Add changes from #1608 (#1689) 

Signed-off-by: Jerome Luckenbach <github@luckenba.ch>
final-2.5.x
Jerome Luckenbach 2021-12-06 18:17:41 +01:00 committed by GitHub
parent 68428ef92b
commit f5df33e6d1
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 5 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
installation/openhabian.md
View File

@ -149,10 +149,15 @@ All packages will be downloaded in their newest version and configured to work w
The whole process will take a few minutes, then openHAB and all other needed tools to get started will be ready to use without further configuration steps.
openHABian is designed as a headless system, you will not need a display or a keyboard.
::: warning
Make sure to follow these instructions and especially set the correct clonebranch, otherwise you will end up with an openHAB 3 installation instead of openHAB 2
:::
**Setup:**
- [Download the latest "openHABian" SD card image file](https://github.com/openhab/openhabian/releases) (Note: the file is *xz* compressed)
- Write the image to your SD card (e.g. with [Etcher](https://www.balena.io/etcher/) or official [Raspberry Pi Imager](https://www.raspberrypi.org/software/), both able to directly work with *xz* files
- Add `clonebranch=stable` to your [openhabian.conf](#openhabian-conf) file like described in the corresponding chapter
- Insert the SD card into your Raspberry Pi, connect Ethernet ([WiFi also supported](#wifi-based-setup-notes)) and power on.
- Wait approximately **15-45 minutes** for openHABian to do its magic. <br>(You can check the progress in your web-browser [here](http://openhabiandevice).)
- Enjoy!