Updated external content (Jenkins build 121)

_addons_bindings/nikobus/readme.md

@@ -145,6 +145,24 @@ Defines a `rollershutter-module` with address `4C6C`.
 | output-5  | Rollershutter | Output 5     |
 | output-6  | Rollershutter | Output 6     |
 
+##### Estimating Position
+
+Nikobus rollershuter module does not provide information about rollershutter's position. In order to bridge this gap, an optional parameter `duration` can be set per channel, describing the amount of time needed by a rollershutter to get from open to closed state (or vice-versa).
+
+Binding uses this information to interpolate rollershutter’s position. On startup binding will assume completely open rollershutters but opening/closing a rollershutter once should bring it back in sync.
+
+After `duration` seconds elapsed, binding will set module's output back to neutral (OFF) state after additional number of seconds, as specified by the `delay` parameter. If not specified, it defaults to 5 seconds.
+
+Example:
+
+`duration = 30s`
+
+binding will automatically switch Nikobus rollershutter module’s output to OFF after
+
+`30s + 5s = 35s`
+
+**Note:** Please ensure all Nikobus Push Buttons manipulating rollershutters have `impactedModules` set so binding is notified about changes.
+
 ### Buttons
 
 Once an openHAB item has been configured as a Nikobus button, it will receive a status update to ON when the physical button is pressed.

_thing_types/org.openhab.binding.nikobus/src/main/resources/OH-INF/thing/rollershutter-module.xml

@@ -40,6 +40,7 @@
 		<item-type>Rollershutter</item-type>
 		<label>Output</label>
 		<description>Rollershutter Module's Output</description>
+		<config-description-ref uri="rollershutter-module:rollershutter-output:config"/>
 	</channel-type>
 
 </thing:thing-descriptions>