updated generated content

Signed-off-by: Kai Kreuzer <kai@openhab.org>

addons/bindings/astro1/readme.md

@@ -11,7 +11,7 @@ source: external
 
 The Astro binding is used for calculating many `DateTime` and positional values for sun and moon and for scheduling of events.
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/astro/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/astro/readme.html).
 
 ### Binding Configuration
 

addons/bindings/autelis1/readme.md

@@ -16,7 +16,7 @@ The binding is fairly complete and supports the following functionality.
 * Read circuit, auxiliary, temperature, pump, chemistry and system values  
 * Control circuit, auxiliary lighting scenes, and temperature set points
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/autelis/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/autelis/readme.html).
 
 ## Binding Configuration
 

addons/bindings/cups1/readme.md

@@ -11,7 +11,7 @@ source: external
 
 The openHAB CUPS binding allows interaction with printers and their print queues via a CUPS server.
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/ipp/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/ipp/readme.html).
 
 ## Prerequisites
 

addons/bindings/digitalstrom1/readme.md

@@ -21,7 +21,7 @@ The openHAB digitalSTROM binding allows interaction with digitalSTROM devices.
 
 <!-- /MarkdownTOC -->
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/digitalstrom/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/digitalstrom/readme.html).
 
  
 ## Prerequisites

addons/bindings/exec1/readme.md

@@ -15,7 +15,7 @@ The Exec binding could act as the opposite of WoL and sends a shutdown command t
 
 Note: when using 'ssh' you should use private key authorization since the password cannot be read from commandline. The given user should have the necessary permissions.
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/exec/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/exec/readme.html).
 
 ## Binding Confguration
 

addons/bindings/freebox1/readme.md

@@ -32,7 +32,7 @@ And act on:
 - Windows printer sharing status (from v1.7)
 - Reboot
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/freebox/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/freebox/readme.html).
 
 ## Binding Configuration
 

addons/bindings/fritzaha1/readme.md

@@ -15,7 +15,7 @@ This binding provides access to AVM Home Automation devices, such as the Fritz!D
 
 The binding interfaces with hosts using a choice of two different interfaces, the query script used in the Fritz!OS UI and a webservice designed for interfacing with external applications.
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/avmfritz/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/avmfritz/readme.html).
 
 ## Binding Configuration
 

addons/bindings/frontiersiliconradio1/readme.md

@@ -33,7 +33,7 @@ You can easily check if your IP radio is supported:
 4. If the response is similar to `FS_OK 6836164442`, your radio is most likely compatible with this binding
 5. If you radio works with this binding, please add it to the list above by [Editing this page](Frontier-Silicon-Radio-Binding/_edit)!
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/fsinternetradio/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/fsinternetradio/readme.html).
 
 ## Binding Configuration
 

addons/bindings/gc100ir1/readme.md

@@ -13,7 +13,7 @@ This page describes the Global Cache IR binding (1.x), which allows openHAB item
 
 ![Global Cache Device](http://www.smarthome.com/media/catalog/product/8/1/8115big.jpg)
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/globalcache/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/globalcache/readme.html).
 
 ## Binding Configuration
 

addons/bindings/harmonyhub1/readme.md

@@ -11,7 +11,7 @@ source: external
 
 The Harmony Hub binding is used to enable communication between openHAB and one or more Logitech Harmony Hub devices. The API exposed by the Harmony Hub is relatively limited, but it does allow for reading the current activity as well as setting the activity and sending device commands.
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/harmonyhub/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/harmonyhub/readme.html).
 
 ## Binding Configuration
 

addons/bindings/homematic1/readme.md

@@ -90,7 +90,7 @@ These ports are used by the binding:
 
 The CCU firewall must be configured to 'full access' for the Remote Homematic-Script API.
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/homematic/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/homematic/readme.html).
 
 ## Binding Configuration
 

addons/bindings/hue1/readme.md

@@ -15,7 +15,7 @@ Click the image below for a YouTube video demonstrating setup, configuration and
 
 [![openHAB Hue binding](http://img.youtube.com/vi/Q4_LkXIRBWc/0.jpg)](http://www.youtube.com/watch?v=Q4_LkXIRBWc)
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/hue/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/hue/readme.html).
 
 ## Prerequisites
 

addons/bindings/maxcube1/readme.md

@@ -11,7 +11,7 @@ source: external
 
 The MAX!Cube binding allows openHAB to connect to [(ELV) MAX!Cube Lan Gateway](http://www.elv.de/max-cube-lan-gateway.html) installations. The binding allows openHAB to communicate with the MAX! devices through the MAX!Cube Lan Gateway.
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/max/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/max/readme.html).
 
 ## Prerequisites
 

addons/bindings/maxcul1/readme.md

@@ -13,7 +13,7 @@ The aim of this binding is to allow the connection from openHAB to MAX! devices
 
 A lot of credit must go to the [FHEM project](http://fhem.de/fhem.html): without their implementation of the MAX interface with CUL this would be taking a lot longer to implement!
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/max/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/max/readme.html).
 
 ## Status
 

addons/bindings/milight1/readme.md

@@ -13,7 +13,7 @@ The Milight binding allows openHAB to send commands to multiple Milight bridges.
 
 [![openHAB Milight](http://img.youtube.com/vi/zNe9AkQbfmc/0.jpg)](http://www.youtube.com/watch?v=zNe9AkQbfmc)
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/milight/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/milight/readme.html).
 
 ## Binding Configuration
 

addons/bindings/netatmo1/readme.md

@@ -13,7 +13,7 @@ The Netatmo binding integrates the Netatmo Personal Weather Station into openHAB
 
 The Netatmo Welcome Camera is also supported; it is a home camera with face recognition. It notifies you when it sees someone it knows, but also when it sees a stranger. See information below to obtain the necessary informations to setup your Netatmo Gear, also see [the Netatmo website](http://www.netatmo.com/) for details on their products.
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/netatmo/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/netatmo/readme.html).
 
 > The Netatmo Binding (1.x) is considered a legacy binding and does not show up by default as an add-on in the OpenHAB 2 Paper UI. In order for the binding to show up as a add-on, you need to go to Configuration->System and enable both **Access Remote Repositories** and **Include Legacy 1.x Bindings** and save the setting. Once you have done this, you will see both **Netatmo Binding** and **Netatmo Binding (1.x)** in Add-ons, you will want to install **Netatmo Binding**.
 

addons/bindings/networkhealth1/readme.md

@@ -11,7 +11,7 @@ source: external
 
 This binding allows openHAB to check whether a device is currently available on the network.
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/network/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/network/readme.html).
 
 ## Binding Configuration
 

addons/bindings/ntp1/readme.md

@@ -11,7 +11,7 @@ source: external
 
 The [Network Time Protocol](https://en.wikipedia.org/wiki/Network_Time_Protocol) (NTP) Binding is used to query an NTP server you configure for the current time, within tens of milliseconds of accurary.  Items in openHAB will receive these updates.
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/ntp/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/ntp/readme.html).
 
 ## Binding Configuration
 

addons/bindings/onkyo1/readme.md

@@ -11,7 +11,7 @@ source: external
 
 This binding is compatible with Onkyo AV receivers which support ISCP (Integra Serial Control Protocol) over Ethernet (eISCP) and serial ports.
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/onkyo/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/onkyo/readme.html).
 
 ## Binding Configuration
 

addons/bindings/opensprinkler1/readme.md

@@ -15,7 +15,7 @@ This binding is compatible with with both the [OpenSprinkler](http://opensprinkl
 
 The binding will sync itself with the OpenSprinkler device at intervals. This allows state of the stations to be updated if they are manually controlled from the OpenSprinkler web application directly.
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/opensprinkler/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/opensprinkler/readme.html).
 
 ## Prerequisites
 

addons/bindings/pioneeravr1/readme.md

@@ -13,7 +13,7 @@ This binding allows openHAB to remotely control a Pioneer AV receiver equipped w
 
 Most common commands are supported directly, special commands can be added manually using the "advanced command" mechanism described below.
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/pioneeravr/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/pioneeravr/readme.html).
 
 ## Binding configuration
 

addons/bindings/pulseaudio1/readme.md

@@ -11,7 +11,7 @@ source: external
 
 This binding allows openHAB to monitor and control pulseaudio servers.
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/pulseaudio/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/pulseaudio/readme.html).
 
 ## Prerequisites
 

addons/bindings/rfxcom1/readme.md

@@ -37,7 +37,7 @@ The RFXCOM binding currently supports the following packet types:
 * Transmitter
 * Wind
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/rfxcom/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/rfxcom/readme.html).
 
 ## Table of Contents
 

addons/bindings/samsungtv1/readme.md

@@ -17,7 +17,7 @@ This binding should be compatible with Samsung TV models which support Apple and
 * The KEY_POWERON command does not switch the TV on. Tested on Samsung UE40ES5700, maybe other models are working.
 * New models (H-Series TV´s like e.g. UEH5570 ) use a different (encrypted) protocol; they are not yet supported by this binding.
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/samsungtv/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/samsungtv/readme.html).
 
 ## Binding Configuration
 

addons/bindings/sonos1/readme.md

@@ -15,7 +15,7 @@ Sonos Players support multi-room audio. Sonos achieves this by grouping Sonos Pl
 
 Sonos Players also support playlists, music streaming services like Spotify, Rapsody, … as well as alarm clocks that you can program to wake up with your favourite music
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/sonos/readme.html).  That binding can discover your Sonos players and therefore does not need you to learn UDNs through alternate means.
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/sonos/readme.html).  That binding can discover your Sonos players and therefore does not need you to learn UDNs through alternate means.
 
 ## Limitations
 

addons/bindings/squeezebox1/readme.md

@@ -17,7 +17,7 @@ From the [Wikipedia entry](http://en.wikipedia.org/wiki/Squeezebox_%28network_mu
 
 > In 2006, Slim Devices was acquired by Logitech for $20 million USD. Logitech continued the development of the player until they announced in August 2012 that it would be discontinued. Given the cross-platform nature of the server and software client, some users have ensured the continued use of the platform by utilizing the Raspberry Pi as dedicated Squeezebox device (both client and server).
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/squeezebox/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/squeezebox/readme.html).
 
 ## Table of Contents
 

addons/bindings/systeminfo1/readme.md

@@ -13,7 +13,7 @@ The System Information binding provides operating system monitoring data, includ
 
 The binding uses the Hyperic SIGAR API to access system information regardless of the underlying platform (Windows, Linux, OS X...). 
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/systeminfo/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/systeminfo/readme.html).
 
 ## Table of Contents
 

addons/bindings/tellstick1/readme.md

@@ -15,7 +15,7 @@ See further information from http://www.telldus.com
 
 The binding supports sensors (temperature and humidity) and devices (switches, dimmers and dimmers without an absolute level).
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/tellstick/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/tellstick/readme.html).
 
 ## Prerequisites
 

addons/bindings/urtsi1/readme.md

@@ -11,7 +11,7 @@ source: external
 
 This binding communicates with Somfy URTSI II devices over a serial connection.
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/urtsi/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/urtsi/readme.html).
 
 ## Binding Configuration
 

addons/bindings/wemo1/readme.md

@@ -11,7 +11,7 @@ source: external
 
 This binding integrates the [Belkin WeMo Family](http://www.belkin.com/us/Products/c/home-automation/).  The integration happens either through the WeMo-Link bridge (feature still to come) which acts as an IP gateway to the ZigBee devices, or through Wi-Fi connection to standalone devices.
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/wemo/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/wemo/readme.html).
 
 ## Binding Configuration
 

addons/bindings/xbmc1/readme.md

@@ -13,7 +13,7 @@ This binding allows openHAB items to receive realtime updates about information
 
 [![openhab binding for xbmc](http://img.youtube.com/vi/N7_5phTVbo0/0.jpg)](http://www.youtube.com/watch?v=N7_5phTVbo0)
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/kodi/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/kodi/readme.html).
 
 <!-- MarkdownTOC -->
 

addons/bindings/yamahareceiver1/readme.md

@@ -42,7 +42,7 @@ Tested Receivers:
 
 Please add your own successfully tested receiver to this list!
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/yamahareceiver/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/yamahareceiver/readme.html).
 
 ## Binding Configuration
 

addons/bindings/zwave1/readme.md

@@ -24,7 +24,7 @@ The openHAB Z-Wave binding allows you to connect to your Z-Wave wireless mesh ne
 
 <!-- /MarkdownTOC -->
 
-There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/oh2/zwave/readme.html).
+There is also a binding specifically for openHAB 2 [here](http://docs.openhab.org/addons/bindings/zwave/readme.html).
 
 ## Prerequisites