Updated external content (Jenkins build 1159)
openHAB Build Server
parent
c7d5d592f0
commit
7ff6602893
|
|
@ -23,7 +23,7 @@ Some of these brands are e.g.:
|
|||
* Ambient Weather
|
||||
* Ecowitt
|
||||
* ELV
|
||||
* Frogitt
|
||||
* Froggit
|
||||
* Misol
|
||||
* Pantech
|
||||
* Sainlogic
|
||||
|
|
@ -36,6 +36,10 @@ Here is a product picture of how this Weather Station looks like:
|
|||
|
||||
This binding works offline by [implementing the wire protocol](https://osswww.ecowitt.net/uploads/20210716/WN1900%20GW1000,1100%20WH2680,2650%20telenet%20v1.6.0%20.pdf) of the WiFi gateway device.
|
||||
|
||||
## Discussion
|
||||
|
||||
If you have any issues or feedback, please feel free to [get in touch via the community forum](https://community.openhab.org/t/fine-offset-weather-station-binding-discussion/134167)
|
||||
|
||||
## Supported Things
|
||||
|
||||
- `weatherstation`: A Fine Offset gateway device with the ThingTypeUID `fineoffsetweatherstation:weatherstation` which supports the [wire protocol](https://osswww.ecowitt.net/uploads/20220407/WN1900%20GW1000,1100%20WH2680,2650%20telenet%20v1.6.4.pdf) e.g.:
|
||||
|
|
@ -288,6 +292,9 @@ Valid sensors:
|
|||
| piezo-rain-month | Number:Length | R | Piezo - Rainfall this Month |
|
||||
| piezo-rain-year | Number:Length | R | Piezo - Rainfall this Year |
|
||||
|
||||
NOTE: Not every gateway provides all available data, even if they are displayed in the WS-View app.
|
||||
Especially the channels `temperature-dew-point` or `temperature-wind-chill` are derived from other measured values.
|
||||
|
||||
### `sensor` Channels
|
||||
|
||||
| Channel | Type | Read/Write | Description |
|
||||
|
|
|
|||
|
|
@ -671,7 +671,7 @@ Support for this is planned for the future release of openHAB HomeKit binding.
|
|||
| | | CurrentVerticalTiltAngle | Number, Dimmer | Number Item = current angle of vertical slats (-90 to +90) . Dimmer Item = the percentage of openness (0%-100%) |
|
||||
| | | TargetVerticalTiltAngle | Number, Dimmer | Number Item = target angle of vertical slats. Dimmer Item = the percentage of openness (0%-100%) |
|
||||
| Slat | | | | Slat which tilts on a vertical or a horizontal axis. Configuration "type:horizontal" or "type:vertical" |
|
||||
| | CurrentSlatState | | String | Current slat state. possible values (FIXED,SWINGING,JAMMED). Custom mapping can be defined at item level, e.g. [JAMMED="JAM", FIXED="FIX"] |
|
||||
| | CurrentSlatState | | String | Current slat state. possible values (FIXED,SWINGING,JAMMED). Custom mapping can be defined at item level, e.g. [JAMMED="JAM", FIXED="FIX"] |
|
||||
| | | Name | String | Name of the slat |
|
||||
| | | SwingMode | Number, Switch | Swing mode. values: 0/OFF=SWING DISABLED, 1/ON=SWING ENABLED |
|
||||
| | | CurrentTiltAngle | Number, Dimmer | Number Item = current angle of slats. values -90 to 90. A value of 0 indicates that the slats are rotated to a fully open position. Dimmer Item = the percentage of openness (0%-100%) |
|
||||
|
|
@ -693,11 +693,11 @@ Support for this is planned for the future release of openHAB HomeKit binding.
|
|||
| Fan | | | | Fan |
|
||||
| | ActiveStatus | | Switch | Accessory current working status. A value of "ON"/"OPEN" indicates that the accessory is active and is functioning without any errors. |
|
||||
| | | CurrentFanState | Number | Current fan state. values: 0=INACTIVE, 1=IDLE, 2=BLOWING AIR |
|
||||
| | | TargetFanState | Number, Switch | Target fan state. values: 0/OFF=MANUAL, 1/ON=AUTO. Flag [inverted=true] swaps the default mapping |
|
||||
| | | RotationDirection | Number, Switch | Rotation direction. values: 0/OFF=CLOCKWISE, 1/ON=COUNTER CLOCKWISE. Flag [inverted=true] swaps the default mapping |
|
||||
| | | TargetFanState | Number, Switch | Target fan state. values: 0/OFF=MANUAL, 1/ON=AUTO. Flag [inverted=true] swaps the default mapping |
|
||||
| | | RotationDirection | Number, Switch | Rotation direction. values: 0/OFF=CLOCKWISE, 1/ON=COUNTER CLOCKWISE. Flag [inverted=true] swaps the default mapping |
|
||||
| | | RotationSpeed | Number, Dimmer | Fan rotation speed in % (1-100) |
|
||||
| | | SwingMode | Number, Switch | Swing mode. values: 0/OFF=SWING DISABLED, 1/ON=SWING ENABLED. Flag [inverted=true] swaps the default mapping |
|
||||
| | | LockControl | Number, Switch | Status of physical control lock. values: 0/OFF=CONTROL LOCK DISABLED, 1/ON=CONTROL LOCK ENABLED.Flag [inverted=true] swaps the default mapping |
|
||||
| | | SwingMode | Number, Switch | Swing mode. values: 0/OFF=SWING DISABLED, 1/ON=SWING ENABLED. Flag [inverted=true] swaps the default mapping |
|
||||
| | | LockControl | Number, Switch | Status of physical control lock. values: 0/OFF=CONTROL LOCK DISABLED, 1/ON=CONTROL LOCK ENABLED.Flag [inverted=true] swaps the default mapping |
|
||||
| Thermostat | | | | A thermostat requires all mandatory characteristics defined below |
|
||||
| | CurrentTemperature | | Number | Current temperature. supported configuration: minValue, maxValue, step |
|
||||
| | TargetTemperature | | Number | Target temperature. supported configuration: minValue, maxValue, step |
|
||||
|
|
@ -706,6 +706,7 @@ Support for this is planned for the future release of openHAB HomeKit binding.
|
|||
| | | Name | String | Name of the thermostat |
|
||||
| | | CoolingThresholdTemperature | Number | Maximum temperature that must be reached before cooling is turned on. min/max/step can configured at item level, e.g. minValue=10.5, maxValue=50, step=2] |
|
||||
| | | HeatingThresholdTemperature | Number | Minimum temperature that must be reached before heating is turned on. min/max/step can configured at item level, e.g. minValue=10.5, maxValue=50, step=2] |
|
||||
| | | RelativeHumidity | Number | Relative humidity in % between 0 and 100. |
|
||||
| HeaterCooler | | | | Heater or/and cooler device |
|
||||
| | ActiveStatus | | Switch | Accessory current working status. A value of "ON"/"OPEN" indicates that the accessory is active and is functioning without any errors. |
|
||||
| | CurrentTemperature | | Number | Current temperature. supported configuration: minValue, maxValue, step |
|
||||
|
|
@ -717,7 +718,7 @@ Support for this is planned for the future release of openHAB HomeKit binding.
|
|||
| | | LockControl | Number, Switch | Status of physical control lock. values: 0/OFF=CONTROL LOCK DISABLED, 1/ON=CONTROL LOCK ENABLED |
|
||||
| | | CoolingThresholdTemperature | Number | Maximum temperature that must be reached before cooling is turned on. min/max/step can configured at item level, e.g. minValue=10.5, maxValue=50, step=2] |
|
||||
| | | HeatingThresholdTemperature | Number | Minimum temperature that must be reached before heating is turned on. min/max/step can configured at item level, e.g. minValue=10.5, maxValue=50, step=2] |
|
||||
| Lock | | | | A Lock Mechanism. with flag [inverted=true] the default mapping to switch ON/OFF can be inverted. |
|
||||
| Lock | | | | A Lock Mechanism. with flag [inverted=true] the default mapping to switch ON/OFF can be inverted. |
|
||||
| | LockCurrentState | | Switch, Number | Current state of lock mechanism (1/ON=SECURED, 0/OFF=UNSECURED, 2=JAMMED, 3=UNKNOWN) |
|
||||
| | LockTargetState | | Switch | Target state of lock mechanism (ON=SECURED, OFF=UNSECURED) |
|
||||
| | | Name | String | Name of the lock |
|
||||
|
|
@ -747,7 +748,7 @@ Support for this is planned for the future release of openHAB HomeKit binding.
|
|||
| | | LockTargetState | Switch | target states of lock mechanism (OFF=SECURED, ON=UNSECURED) |
|
||||
| Battery | | | | Accessory with battery. Battery can be chargeable (configuration chargeable:true) and non-chargeable (configuration chargeable:false) |
|
||||
| | BatteryLevel | | Number | Battery level 0% to 100% |
|
||||
| | BatteryLowStatus | | Switch, Contact, Number | Battery low indicator. ON/OPEN = battery level is low; for number if the value is below the lowThreshold, then it is low. Default is 20. |
|
||||
| | BatteryLowStatus | | Switch, Contact, Number | Battery low indicator. ON/OPEN = battery level is low; for number if the value is below the lowThreshold, then it is low. Default is 20. |
|
||||
| | BatteryChargingState | | Switch, Contact | Mandatory only for chargeable battery. ON/OPEN = battery is charging |
|
||||
| | | Name | String | Name of the battery accessory |
|
||||
| Filter | | | | Accessory with filter maintenance indicator |
|
||||
|
|
|
|||
Loading…
Reference in New Issue