60 lines
2.1 KiB
Markdown
60 lines
2.1 KiB
Markdown
|
---
|
||
|
|
id: rpircswitch
|
||
|
|
label: Raspberry Pi RC Switch
|
||
|
title: Raspberry Pi RC Switch - Bindings
|
||
|
|
type: binding
|
||
|
|
description: "This binding enables the management of remote controlled (RC) switches via a 433-MHz transmitter connected to a Raspberry Pi. It can be used with a 433-MHz transmitter connected to a Raspberry Pi as described in [this assembly instruction](https://www.raspberrypi.org/forums/viewtopic.php?f=37&t=66946)."
|
||
|
|
source: https://github.com/openhab/openhab1-addons/blob/master/bundles/binding/org.openhab.binding.rpircswitch/README.md
|
||
|
|
since: 1x
|
||
|
|
install: manual
|
||
|
|
---
|
||
|
|
|
||
|
|
<!-- Attention authors: Do not edit directly. Please add your changes to the appropriate source repository -->
|
||
|
|
|
||
|
|
{% include base.html %}
|
||
|
|
|
||
|
|
# Raspberry Pi RC Switch Binding
|
||
|
|
|
||
|
|
This binding enables the management of remote controlled (RC) switches via a 433-MHz transmitter connected to a Raspberry Pi. It can be used with a 433-MHz transmitter connected to a Raspberry Pi as described in [this assembly instruction](https://www.raspberrypi.org/forums/viewtopic.php?f=37&t=66946).
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
## Binding Configuration
|
||
|
|
|
||
|
|
This binding can be configured in the file `services/rpircswitch.cfg`.
|
||
|
|
|
||
|
|
| Property | Default | Required | Description |
|
||
|
|
|----------|---------|:--------:|-------------|
|
||
|
|
| gpioPin | | Yes | GPIO port from which the RC transmitter receives its data |
|
||
|
|
|
||
|
|
## Item Configuration
|
||
|
|
|
||
|
|
This binding only supports Switch items, which can be configured with the following syntax:
|
||
|
|
|
||
|
|
```
|
||
|
|
Switch YourItemName { rpircswitch="<groupAddress>:<deviceAddress>" }
|
||
|
|
```
|
||
|
|
|
||
|
|
where:
|
||
|
|
|
||
|
|
* `<groupAddress>` is the ID of the switch group
|
||
|
|
* `<deviceAddress>` is the ID of the switch within the group
|
||
|
|
|
||
|
|
Group and device address can usually be configured in the RC switch device by adjusting DIP switches.
|
||
|
|
|
||
|
|
## Example
|
||
|
|
|
||
|
|
items/rpircswitchdemo.items
|
||
|
|
|
||
|
|
```
|
||
|
|
Switch SleepingRoom { rpircswitch="11111:4" }
|
||
|
|
Switch LivingRoom { rpircswitch="11111:1" }
|
||
|
|
```
|
||
|
|
|
||
|
|
sitemaps/rpircswitch.sitemap.fragment
|
||
|
|
|
||
|
|
```
|
||
|
|
Switch item=SleepingRoom label="Sleeping Room"
|
||
|
|
Switch item=LivingRoom label="Living Room"
|
||
|
|
```
|