[nibeheatpump] Added PRODINo ESP32 Ethernet v1 board support (#13190)
* [nibeheatpump] Added PRODINo ESP32 Ethernet v1 board support Also added: - telnet debug support (UDP debug removed) - new configuration model - OTA update support for PRODINo ESP32 Ethernet v1 board Signed-off-by: Pauli Anttila <pauli.anttila@gmail.com>pull/13230/head
pali
GitHub
parent
11cf3ca86b
commit
e53e1a5e99
|
|
@ -59,14 +59,15 @@ The Nibe Heat Pump binding will listen to a UDP port and parse register data fro
|
||||||
### Arduino
|
### Arduino
|
||||||
|
|
||||||
An Arduino-based solution has been tested with Arduino uno + RS485 and Ethernet shields.
|
An Arduino-based solution has been tested with Arduino uno + RS485 and Ethernet shields.
|
||||||
The [ProDiNo](https://www.kmpelectronics.eu/en-us/products/prodinoethernet.aspx) NetBoards are also supported.
|
[PRODINo ESP32 Ethernet v1](https://kmpelectronics.eu/products/prodino-esp32-ethernet-v1/) and [ProDiNo Ethernet V2](https://kmpelectronics.eu/products/prodino-ethernet-v2/) boards are also supported.
|
||||||
A ProDiNo has an Ethernet and RS-485 port on the board.
|
PRODINo boards have built-in Ethernet and RS-485 ports.
|
||||||
|
|
||||||
Arduino code is available [here](https://github.com/openhab/openhab-addons/tree/main/bundles/org.openhab.binding.nibeheatpump/contrib/NibeGW/Arduino/NibeGW).
|
Arduino code is available [here](https://github.com/openhab/openhab-addons/tree/main/bundles/org.openhab.binding.nibeheatpump/contrib/NibeGW/Arduino/NibeGW).
|
||||||
|
|
||||||
Arduino code can be build via Arduino IDE.
|
Arduino code can be build via Arduino IDE.
|
||||||
For more details see [www.arduino.cc](https://www.arduino.cc/en/Main/Software).
|
For more details see [www.arduino.cc](https://www.arduino.cc/en/Main/Software).
|
||||||
NibeGW configuration (such IP addresses, ports, etc) can be adapted directly by editing the code files.
|
NibeGW configuration (such IP addresses, ports, etc) can be adapted directly by editing the code files.
|
||||||
|
PRODINo ESP32 Ethernet v1 also supports dynamic configuration and OTA updates via Wi-Fi access point.
|
||||||
|
|
||||||
### Raspberry Pi (or other Linux/Unix based boards)
|
### Raspberry Pi (or other Linux/Unix based boards)
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,220 @@
|
||||||
|
/**
|
||||||
|
* Copyright (c) 2010-2022 Contributors to the openHAB project
|
||||||
|
*
|
||||||
|
* See the NOTICE file(s) distributed with this work for additional
|
||||||
|
* information.
|
||||||
|
*
|
||||||
|
* This program and the accompanying materials are made available under the
|
||||||
|
* terms of the Eclipse Public License 2.0 which is available at
|
||||||
|
* http://www.eclipse.org/legal/epl-2.0
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: EPL-2.0
|
||||||
|
*
|
||||||
|
* Author: pauli.anttila@gmail.com
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#ifndef Config_h
|
||||||
|
#define Config_h
|
||||||
|
|
||||||
|
// ######### BOARD SELECTION #######################
|
||||||
|
|
||||||
|
// Enable if you use ProDiNo NetBoard V2.1 board
|
||||||
|
//#define PRODINO_BOARD
|
||||||
|
|
||||||
|
// Enable if you use PRODINo ESP32 Ethernet v1 (Enable also HARDWARE_SERIAL_WITH_PINS in NibeGW.h)
|
||||||
|
#define PRODINO_BOARD_ESP32
|
||||||
|
|
||||||
|
// Enable if ENC28J60 LAN module is used
|
||||||
|
//#define TRANSPORT_ETH_ENC28J60
|
||||||
|
|
||||||
|
// ######### CONFIGURATION #######################
|
||||||
|
|
||||||
|
// Enable dynamic configuration mode via WiFi connection (supported only by the PRODINO_BOARD_ESP32 board)
|
||||||
|
// Dynamic configuration mode is loaded if input 0 is ON during boot
|
||||||
|
// When dynamic configuration mode is activated, login to the 'Bleeper' WiFi Access point:
|
||||||
|
// 1. Configuration page is available on IP 192.168.4.1 port 80 (http://192.168.4.1).
|
||||||
|
// 2. OTA update page is available on IP 192.168.4.1 port 8080 (http://192.168.4.1:8080/update).
|
||||||
|
// Install following libraries via Arduino IDE library manager:
|
||||||
|
// 1. Bleeper (tested with version 1.1.0)
|
||||||
|
// 2. ElegantOTA (tested with version 2.2.9)
|
||||||
|
#define ENABLE_DYNAMIC_CONFIG
|
||||||
|
|
||||||
|
// Enable debug printouts.
|
||||||
|
#define ENABLE_DEBUG
|
||||||
|
#define VERBOSE_LEVEL 1
|
||||||
|
#define ENABLE_SERIAL_DEBUG
|
||||||
|
#define ENABLE_REMOTE_DEBUG // Remote debug is available in telnet port 23
|
||||||
|
|
||||||
|
#define BOARD_NAME "Arduino NibeGW"
|
||||||
|
|
||||||
|
// Ethernet configuration
|
||||||
|
#define BOARD_MAC "DE:AD:BE:EF:FE:ED"
|
||||||
|
#define BOARD_IP "192.168.1.100"
|
||||||
|
#define DNS_SERVER "192.168.1.1"
|
||||||
|
#define GATEWAY_IP "192.168.1.1"
|
||||||
|
#define NETWORK_MASK "255.255.255.0"
|
||||||
|
|
||||||
|
// UDP ports for incoming messages
|
||||||
|
#define INCOMING_PORT_READCMDS 9999
|
||||||
|
#define INCOMING_PORT_WRITECMDS 10000
|
||||||
|
|
||||||
|
// Target IP address and port where Nibe UDP packets are send
|
||||||
|
#define TARGET_IP "192.168.1.101"
|
||||||
|
#define TARGET_PORT 9999
|
||||||
|
|
||||||
|
// Delay before initialize ethernet on startup in seconds
|
||||||
|
#define ETH_INIT_DELAY 5
|
||||||
|
|
||||||
|
// Send acknowledge PDU's to Nibe
|
||||||
|
#define SEND_ACK true
|
||||||
|
|
||||||
|
// Ack following periperial messages
|
||||||
|
#define ACK_MODBUS40 true
|
||||||
|
#define ACK_SMS40 false
|
||||||
|
#define ACK_RMU40 false
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// Used serial port and direction change pin for RS-485 port
|
||||||
|
#if defined(PRODINO_BOARD)
|
||||||
|
#define RS485_PORT Serial1
|
||||||
|
#define RS485_DIRECTION_PIN 3
|
||||||
|
#elif defined(PRODINO_BOARD_ESP32)
|
||||||
|
#define WDT_TIMEOUT 2
|
||||||
|
#define RS485_RX_PIN 4
|
||||||
|
#define RS485_TX_PIN 16
|
||||||
|
#define RS485_DIRECTION_PIN 2
|
||||||
|
#else
|
||||||
|
#define RS485_PORT Serial
|
||||||
|
#define RS485_DIRECTION_PIN 2
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// ######### VARIABLES #######################
|
||||||
|
|
||||||
|
#if defined(PRODINO_BOARD_ESP32) && defined(ENABLE_DYNAMIC_CONFIG)
|
||||||
|
|
||||||
|
#include "Bleeper.h" // https://github.com/workilabs/Bleeper
|
||||||
|
#include "ElegantOTA.h" // https://github.com/ayushsharma82/ElegantOTA
|
||||||
|
|
||||||
|
WebServer otaServer(8080);
|
||||||
|
|
||||||
|
class EthConfig: public Configuration {
|
||||||
|
public:
|
||||||
|
persistentStringVar(mac, BOARD_MAC);
|
||||||
|
persistentStringVar(ip, BOARD_IP);
|
||||||
|
persistentStringVar(dns, DNS_SERVER);
|
||||||
|
persistentStringVar(gateway, GATEWAY_IP);
|
||||||
|
persistentStringVar(mask, NETWORK_MASK);
|
||||||
|
persistentIntVar(initDelay, ETH_INIT_DELAY);
|
||||||
|
};
|
||||||
|
|
||||||
|
class NibeAckConfig: public Configuration {
|
||||||
|
public:
|
||||||
|
persistentIntVar(sendAck, SEND_ACK);
|
||||||
|
persistentIntVar(modbus40, ACK_MODBUS40);
|
||||||
|
persistentIntVar(sms40, ACK_SMS40);
|
||||||
|
persistentIntVar(rmu40, ACK_RMU40);
|
||||||
|
};
|
||||||
|
|
||||||
|
class NibeConfig: public Configuration {
|
||||||
|
public:
|
||||||
|
persistentStringVar(targetIp, TARGET_IP);
|
||||||
|
persistentIntVar(targetPort, TARGET_PORT);
|
||||||
|
persistentIntVar(readCmdsPort, INCOMING_PORT_READCMDS);
|
||||||
|
persistentIntVar(writeCmdsPort, INCOMING_PORT_WRITECMDS);
|
||||||
|
subconfig(NibeAckConfig, ack);
|
||||||
|
};
|
||||||
|
|
||||||
|
#ifdef ENABLE_DEBUG
|
||||||
|
class DebugConfig: public Configuration {
|
||||||
|
public:
|
||||||
|
persistentIntVar(verboseLevel, VERBOSE_LEVEL);
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
class Config: public RootConfiguration {
|
||||||
|
public:
|
||||||
|
persistentStringVar(boardName, BOARD_NAME);
|
||||||
|
subconfig(EthConfig, eth);
|
||||||
|
subconfig(NibeConfig, nibe);
|
||||||
|
#ifdef ENABLE_DEBUG
|
||||||
|
subconfig(DebugConfig, debug);
|
||||||
|
#endif
|
||||||
|
} config;
|
||||||
|
|
||||||
|
#else
|
||||||
|
|
||||||
|
typedef struct Config {
|
||||||
|
String boardName;
|
||||||
|
struct {
|
||||||
|
String mac;
|
||||||
|
String ip;
|
||||||
|
String dns;
|
||||||
|
String gateway;
|
||||||
|
String mask;
|
||||||
|
uint16_t initDelay;
|
||||||
|
} eth;
|
||||||
|
|
||||||
|
struct {
|
||||||
|
String targetIp;
|
||||||
|
uint16_t targetPort;
|
||||||
|
uint16_t readCmdsPort;
|
||||||
|
uint16_t writeCmdsPort;
|
||||||
|
struct {
|
||||||
|
uint8_t sendAck;
|
||||||
|
uint8_t modbus40;
|
||||||
|
uint8_t sms40;
|
||||||
|
uint8_t rmu40;
|
||||||
|
} ack;
|
||||||
|
} nibe;
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef ENABLE_DEBUG
|
||||||
|
struct {
|
||||||
|
uint8_t verboseLevel;
|
||||||
|
} debug;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
Config config = {
|
||||||
|
BOARD_NAME,
|
||||||
|
|
||||||
|
{
|
||||||
|
BOARD_MAC,
|
||||||
|
BOARD_IP,
|
||||||
|
DNS_SERVER,
|
||||||
|
GATEWAY_IP,
|
||||||
|
NETWORK_MASK,
|
||||||
|
ETH_INIT_DELAY
|
||||||
|
},
|
||||||
|
|
||||||
|
{
|
||||||
|
TARGET_IP,
|
||||||
|
TARGET_PORT,
|
||||||
|
INCOMING_PORT_READCMDS,
|
||||||
|
INCOMING_PORT_WRITECMDS,
|
||||||
|
|
||||||
|
{
|
||||||
|
SEND_ACK,
|
||||||
|
ACK_MODBUS40,
|
||||||
|
ACK_SMS40,
|
||||||
|
ACK_RMU40,
|
||||||
|
},
|
||||||
|
},
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef ENABLE_DEBUG
|
||||||
|
{
|
||||||
|
VERBOSE_LEVEL
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,47 @@
|
||||||
|
/**
|
||||||
|
* Copyright (c) 2010-2022 Contributors to the openHAB project
|
||||||
|
*
|
||||||
|
* See the NOTICE file(s) distributed with this work for additional
|
||||||
|
* information.
|
||||||
|
*
|
||||||
|
* This program and the accompanying materials are made available under the
|
||||||
|
* terms of the Eclipse Public License 2.0 which is available at
|
||||||
|
* http://www.eclipse.org/legal/epl-2.0
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: EPL-2.0
|
||||||
|
*
|
||||||
|
* Author: pauli.anttila@gmail.com
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#ifndef Debug_h
|
||||||
|
#define Debug_h
|
||||||
|
|
||||||
|
#ifdef ENABLE_DEBUG
|
||||||
|
#define DEBUG_PRINT_MSG(level, message) if (config.debug.verboseLevel >= level) { debugPrint(message); }
|
||||||
|
#define DEBUG_PRINT_VARS(level, message, ...) if (config.debug.verboseLevel >= level) { sprintf(debugBuf, message, __VA_ARGS__); debugPrint(debugBuf); }
|
||||||
|
#define DEBUG_PRINT_ARRAY(level, data, len) if (config.debug.verboseLevel >= level) { for (int i = 0; i < len; i++) { sprintf(debugBuf, "%02X", data[i]); debugPrint(debugBuf); }}
|
||||||
|
|
||||||
|
#define DEBUG_BUFFER_SIZE 80
|
||||||
|
char debugBuf[DEBUG_BUFFER_SIZE];
|
||||||
|
|
||||||
|
#ifdef ENABLE_REMOTE_DEBUG
|
||||||
|
EthernetServer telnet(23);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
void debugPrint(char* data) {
|
||||||
|
#ifdef ENABLE_SERIAL_DEBUG
|
||||||
|
Serial.print(data);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef ENABLE_REMOTE_DEBUG
|
||||||
|
telnet.print(data);
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
#else
|
||||||
|
#define DEBUG_PRINT_MSG(level, message)
|
||||||
|
#define DEBUG_PRINT_VARS(level, message, ...)
|
||||||
|
#define DEBUG_PRINT_ARRAY(level, data, len)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -20,337 +20,465 @@
|
||||||
* 27.6.2014 v1.02 Fixed compile error and added Ethernet initialization delay.
|
* 27.6.2014 v1.02 Fixed compile error and added Ethernet initialization delay.
|
||||||
* 29.6.2015 v2.00 Bidirectional support.
|
* 29.6.2015 v2.00 Bidirectional support.
|
||||||
* 18.2.2017 v3.00 Redesigned.
|
* 18.2.2017 v3.00 Redesigned.
|
||||||
* 14.3.2021 v3.01 Fix Prodino build + fixed UDP issue + debug improvements.
|
* 14.3.2021 v3.01 Fix Prodino build + fixed UDP issue + debug improvements
|
||||||
|
* 3.7.2022 v4.00 Send messages to IP address received from the UDP messages
|
||||||
|
* 13.7.2022 v4.01 Fixed target IP address issue
|
||||||
|
* 29.7.2022 v5.00 New configuration model and PRODINo ESP32 Ethernet v1 support with OTA update
|
||||||
*/
|
*/
|
||||||
|
|
||||||
// ######### CONFIGURATION #######################
|
#define VERSION "5.00"
|
||||||
|
|
||||||
#define VERSION "3.01"
|
|
||||||
|
|
||||||
// Enable if you use ProDiNo board
|
|
||||||
// Have been tested with KMPDinoEthernet v1.6.1 (https://github.com/kmpelectronics/Arduino/tree/master/KMPDinoEthernet/Releases)
|
|
||||||
//#define PRODINO_BOARD
|
|
||||||
|
|
||||||
// Enable if ENC28J60 LAN module is used
|
|
||||||
//#define TRANSPORT_ETH_ENC28J60
|
|
||||||
|
|
||||||
// Enable if you use STM32 NUCLEO-F429ZI
|
|
||||||
//#define STM32_F429ZI_BOARD
|
|
||||||
|
|
||||||
|
|
||||||
// Enable debug printouts
|
|
||||||
//#define ENABLE_DEBUG
|
|
||||||
|
|
||||||
// Enable UDP debug printouts, listen printouts e.g. via netcat (nc -l -u 50000)
|
|
||||||
//#define ENABLE_UDP_DEBUG
|
|
||||||
|
|
||||||
#define VERBOSE_LEVEL 1
|
|
||||||
|
|
||||||
#define BOARD_NAME "Arduino NibeGW"
|
|
||||||
#define BOARD_MAC { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }
|
|
||||||
#define BOARD_IP { 192, 168, 1, 50 }
|
|
||||||
#define GATEWAY_IP { 192, 168, 1, 1 }
|
|
||||||
#define NETWORK_MASK { 255, 255, 255, 0 }
|
|
||||||
#define INCOMING_PORT_READCMDS 9999
|
|
||||||
#define INCOMING_PORT_WRITECMDS 10000
|
|
||||||
|
|
||||||
#define TARGET_IP 192, 168, 1, 19
|
|
||||||
#define TARGET_PORT 9999
|
|
||||||
#define TARGET_DEBUG_PORT 50000
|
|
||||||
|
|
||||||
// Delay before initialize ethernet on startup in seconds
|
|
||||||
#define ETH_INIT_DELAY 5
|
|
||||||
|
|
||||||
// Used serial port and direction change pin for RS-485 port
|
|
||||||
// Note! Select if Serial is SW or HW serial port in NibeGw.h
|
|
||||||
#ifdef PRODINO_BOARD
|
|
||||||
#define RS485_PORT Serial1
|
|
||||||
#define RS485_DIRECTION_PIN 3
|
|
||||||
#elif defined STM32_F429ZI_BOARD
|
|
||||||
#include <HardwareSerial.h>
|
|
||||||
HardwareSerial Serial1(PG9,PG14);
|
|
||||||
#define RS485_PORT Serial1
|
|
||||||
#define RS485_DIRECTION_PIN PF15
|
|
||||||
#else
|
|
||||||
#define RS485_PORT Serial
|
|
||||||
#define RS485_DIRECTION_PIN 2
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define ACK_MODBUS40 true
|
|
||||||
#define ACK_SMS40 false
|
|
||||||
#define ACK_RMU40 false
|
|
||||||
#define SEND_ACK true
|
|
||||||
|
|
||||||
#define DEBUG_BUFFER_SIZE 80
|
|
||||||
|
|
||||||
// ######### INCLUDES #######################
|
// ######### INCLUDES #######################
|
||||||
|
|
||||||
#ifdef TRANSPORT_ETH_ENC28J60
|
#include "Config.h"
|
||||||
|
|
||||||
|
#if defined(PRODINO_BOARD)
|
||||||
|
#include "KmpDinoEthernet.h"
|
||||||
|
#include "KMPCommon.h"
|
||||||
|
#include "Ethernet/utility/w5100.h"
|
||||||
|
#elif defined(PRODINO_BOARD_ESP32)
|
||||||
|
#include <esp_task_wdt.h>
|
||||||
|
#include "KMPProDinoESP32.h"
|
||||||
|
#include "KMPCommon.h"
|
||||||
|
#elif defined(TRANSPORT_ETH_ENC28J60)
|
||||||
#include <UIPEthernet.h>
|
#include <UIPEthernet.h>
|
||||||
#elif defined STM32_F429ZI_BOARD
|
|
||||||
#include <LwIP.h>
|
|
||||||
#include <STM32Ethernet.h>
|
|
||||||
#include <EthernetUdp.h>
|
|
||||||
#elif defined PRODINO_BOARD
|
|
||||||
#include <SPI.h>
|
|
||||||
#include "KmpDinoEthernet.h"
|
|
||||||
#include "KMPCommon.h"
|
|
||||||
#include "Ethernet/utility/w5100.h"
|
|
||||||
#else
|
#else
|
||||||
#include <SPI.h>
|
#include <SPI.h>
|
||||||
#include <Ethernet.h>
|
#include <Ethernet.h>
|
||||||
#include <EthernetUdp.h>
|
#include <EthernetUdp.h>
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifdef STM32_F429ZI_BOARD
|
#if !defined(PRODINO_BOARD_ESP32)
|
||||||
#include <IWatchdog.h>
|
#include <avr/wdt.h>
|
||||||
#else
|
|
||||||
#include <avr/wdt.h>
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#include "NibeGw.h"
|
#include "NibeGw.h"
|
||||||
|
#include "Debug.h"
|
||||||
|
|
||||||
// ######### VARIABLES #######################
|
// ######### VARIABLES #######################
|
||||||
|
|
||||||
// The media access control (ethernet hardware) address for the shield
|
boolean ethInitialized = false;
|
||||||
byte mac[] = BOARD_MAC;
|
|
||||||
|
|
||||||
//The IP address for the shield
|
IPAddress targetIp;
|
||||||
byte ip[] = BOARD_IP;
|
|
||||||
|
|
||||||
//The IP address of the gateway
|
|
||||||
byte gw[] = GATEWAY_IP;
|
|
||||||
|
|
||||||
//The network mask
|
|
||||||
byte mask[] = NETWORK_MASK;
|
|
||||||
|
|
||||||
boolean ethernetInitialized = false;
|
|
||||||
|
|
||||||
// Target IP address and port where Nibe UDP packets are send
|
|
||||||
IPAddress targetIp(TARGET_IP);
|
|
||||||
EthernetUDP udp;
|
EthernetUDP udp;
|
||||||
EthernetUDP udp4writeCmnds;
|
EthernetUDP udp4writeCmnds;
|
||||||
|
|
||||||
NibeGw nibegw(&RS485_PORT, RS485_DIRECTION_PIN);
|
#if defined(PRODINO_BOARD_ESP32)
|
||||||
|
HardwareSerial RS485_PORT(1);
|
||||||
// ######### DEBUG #######################
|
NibeGw nibegw(&RS485_PORT, RS485_DIRECTION_PIN, RS485_RX_PIN, RS485_TX_PIN);
|
||||||
|
|
||||||
#define DEBUG_BUFFER_SIZE 80
|
|
||||||
|
|
||||||
#ifdef ENABLE_DEBUG
|
|
||||||
#define DEBUG_PRINT(level, message) if (verbose >= level) { debugPrint(message); }
|
|
||||||
#define DEBUG_PRINTDATA(level, message, data) if (verbose >= level) { sprintf(debugBuf, message, data); debugPrint(debugBuf); }
|
|
||||||
#define DEBUG_PRINTARRAY(level, data, len) if (verbose >= level) { for (int i = 0; i < len; i++) { sprintf(debugBuf, "%02X", data[i]); debugPrint(debugBuf); }}
|
|
||||||
#else
|
#else
|
||||||
#define DEBUG_PRINT(level, message)
|
NibeGw nibegw(&RS485_PORT, RS485_DIRECTION_PIN);
|
||||||
#define DEBUG_PRINTDATA(level, message, data)
|
|
||||||
#define DEBUG_PRINTARRAY(level, data, len)
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifdef ENABLE_DEBUG
|
#if defined(PRODINO_BOARD_ESP32) && defined(ENABLE_DYNAMIC_CONFIG)
|
||||||
char verbose = VERBOSE_LEVEL;
|
boolean dynamicConfigStarted = false;
|
||||||
char debugBuf[DEBUG_BUFFER_SIZE];
|
|
||||||
|
class ConfigObserver: public ConfigurationObserver {
|
||||||
|
public:
|
||||||
|
void onConfigurationChanged(const ConfigurationPropertyChange value) {
|
||||||
|
DEBUG_PRINT_VARS(0, "Configuration parameter '%s' changed from '%s' to '%s'\n",
|
||||||
|
String(value.key).c_str(),
|
||||||
|
String(value.oldValue).c_str(),
|
||||||
|
String(value.newValue).c_str());
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
void debugPrint(char* data)
|
|
||||||
{
|
|
||||||
#ifdef ENABLE_UDP_DEBUG
|
|
||||||
if (ethernetInitialized)
|
|
||||||
{
|
|
||||||
udp.beginPacket(targetIp, TARGET_DEBUG_PORT);
|
|
||||||
udp.write(data);
|
|
||||||
udp.endPacket();
|
|
||||||
}
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifdef PRODINO_BOARD
|
|
||||||
Serial.print(data);
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// ######### FUNCTION DEFINITION ######################
|
|
||||||
|
|
||||||
void nibeCallbackMsgReceived(const byte* const data, int len);
|
|
||||||
int nibeCallbackTokenReceived(eTokenType token, byte* data);
|
|
||||||
void sendUdpPacket(const byte * const data, int len);
|
|
||||||
void initializeEthernet();
|
|
||||||
|
|
||||||
|
|
||||||
// ######### SETUP #######################
|
// ######### SETUP #######################
|
||||||
|
|
||||||
void setup()
|
void setup() {
|
||||||
{
|
#if defined(PRODINO_BOARD_ESP32)
|
||||||
|
KMPProDinoESP32.begin(ProDino_ESP32_Ethernet);
|
||||||
|
KMPProDinoESP32.setStatusLed(red);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(PRODINO_BOARD_ESP32) && defined(ENABLE_DYNAMIC_CONFIG)
|
||||||
|
if (isDynamicConfigModeActivated()) {
|
||||||
|
setupDynamicConfigMode();
|
||||||
|
} else {
|
||||||
|
setupStaticConfigMode();
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
setupStaticConfigMode();
|
||||||
|
#endif
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void setupStaticConfigMode() {
|
||||||
|
#if defined(PRODINO_BOARD_ESP32) && defined(ENABLE_DYNAMIC_CONFIG)
|
||||||
|
// Use temporarily longer wathdog time as possible flash formating might take a while
|
||||||
|
esp_task_wdt_init(60, true);
|
||||||
|
esp_task_wdt_add(NULL);
|
||||||
|
KMPProDinoESP32.setStatusLed(white);
|
||||||
|
Bleeper
|
||||||
|
.configuration
|
||||||
|
.set(&config)
|
||||||
|
.done()
|
||||||
|
.storage
|
||||||
|
.set(new SPIFFSStorage())
|
||||||
|
.done()
|
||||||
|
.init();
|
||||||
|
esp_task_wdt_reset();
|
||||||
|
KMPProDinoESP32.setStatusLed(red);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(PRODINO_BOARD_ESP32)
|
||||||
|
Serial.begin(115200, SERIAL_8N1);
|
||||||
|
#elif defined(PRODINO_BOARD)
|
||||||
|
Serial.begin(115200, SERIAL_8N1);
|
||||||
|
DinoInit();
|
||||||
|
#endif
|
||||||
|
|
||||||
// Start watchdog
|
// Start watchdog
|
||||||
#ifdef STM32_F429ZI_BOARD
|
#if defined(PRODINO_BOARD_ESP32)
|
||||||
IWatchdog.begin(2000000); // 2 sec
|
esp_task_wdt_init(WDT_TIMEOUT, true);
|
||||||
#else
|
esp_task_wdt_add(NULL);
|
||||||
wdt_enable (WDTO_2S);
|
#else
|
||||||
#endif
|
wdt_enable(WDTO_2S);
|
||||||
|
#endif
|
||||||
|
|
||||||
nibegw.setCallback(nibeCallbackMsgReceived, nibeCallbackTokenReceived);
|
nibegw.setCallback(nibeCallbackMsgReceived, nibeCallbackTokenReceived);
|
||||||
nibegw.setAckModbus40Address(ACK_MODBUS40);
|
nibegw.setSendAcknowledge(config.nibe.ack.sendAck);
|
||||||
nibegw.setAckSms40Address(ACK_SMS40);
|
nibegw.setAckModbus40Address(config.nibe.ack.modbus40);
|
||||||
nibegw.setAckRmu40Address(ACK_RMU40);
|
nibegw.setAckSms40Address(config.nibe.ack.sms40);
|
||||||
nibegw.setSendAcknowledge(SEND_ACK);
|
nibegw.setAckRmu40Address(config.nibe.ack.rmu40);
|
||||||
|
|
||||||
#ifdef ENABLE_NIBE_DEBUG
|
#ifdef ENABLE_NIBE_DEBUG
|
||||||
nibegw.setDebugCallback(nibeDebugCallback);
|
nibegw.setDebugCallback(nibeDebugCallback);
|
||||||
nibegw.setVerboseLevel(VERBOSE_LEVEL);
|
nibegw.setVerboseLevel(config.debug.level);
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifdef PRODINO_BOARD
|
targetIp.fromString(config.nibe.targetIp);
|
||||||
DinoInit();
|
|
||||||
Serial.begin(115200, SERIAL_8N1);
|
|
||||||
#endif
|
|
||||||
|
|
||||||
DEBUG_PRINTDATA(0, "%s ", BOARD_NAME);
|
DEBUG_PRINT_VARS(0, "%s version %s Started\n", config.boardName.c_str(), VERSION);
|
||||||
DEBUG_PRINTDATA(0, "version %s\n", VERSION);
|
|
||||||
DEBUG_PRINT(0, "Started\n");
|
|
||||||
}
|
}
|
||||||
|
|
||||||
|
#if defined(PRODINO_BOARD_ESP32) && defined(ENABLE_DYNAMIC_CONFIG)
|
||||||
|
|
||||||
|
boolean isDynamicConfigModeActivated() {
|
||||||
|
if (KMPProDinoESP32.getOptoInState(0)) {
|
||||||
|
delay(50);
|
||||||
|
if (KMPProDinoESP32.getOptoInState(0)) {
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
void setupDynamicConfigMode() {
|
||||||
|
KMPProDinoESP32.setStatusLed(white);
|
||||||
|
Bleeper
|
||||||
|
.verbose(115200)
|
||||||
|
.configuration
|
||||||
|
.set(&config)
|
||||||
|
.addObserver(new ConfigObserver(), {})
|
||||||
|
.done()
|
||||||
|
.configurationInterface
|
||||||
|
.addDefaultWebServer()
|
||||||
|
.done()
|
||||||
|
.connection
|
||||||
|
.setSingleConnectionFromPriorityList({
|
||||||
|
new AP()
|
||||||
|
})
|
||||||
|
.done()
|
||||||
|
.storage
|
||||||
|
.set(new SPIFFSStorage())
|
||||||
|
.done()
|
||||||
|
.init();
|
||||||
|
|
||||||
|
ElegantOTA.begin(&otaServer);
|
||||||
|
otaServer.begin();
|
||||||
|
|
||||||
|
dynamicConfigStarted = true;
|
||||||
|
KMPProDinoESP32.setStatusLed(blue);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
// ######### MAIN LOOP #######################
|
// ######### MAIN LOOP #######################
|
||||||
|
|
||||||
void loop()
|
void loop() {
|
||||||
{
|
#if defined(PRODINO_BOARD_ESP32) && defined(ENABLE_DYNAMIC_CONFIG)
|
||||||
#ifdef STM32_F429ZI_BOARD
|
if (dynamicConfigStarted) {
|
||||||
IWatchdog.reload();
|
loopDynamicConfigMode();
|
||||||
#else
|
} else {
|
||||||
wdt_reset();
|
loopNormalMode();
|
||||||
#endif
|
}
|
||||||
|
#else
|
||||||
|
loopNormalMode();
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
void loopNormalMode() {
|
||||||
|
#if defined(PRODINO_BOARD_ESP32)
|
||||||
|
esp_task_wdt_reset();
|
||||||
|
#else
|
||||||
|
wdt_reset();
|
||||||
|
#endif
|
||||||
|
|
||||||
long now = millis() / 1000;
|
long now = millis() / 1000;
|
||||||
|
|
||||||
if (!nibegw.connected())
|
if (!nibegw.connected()) {
|
||||||
{
|
|
||||||
nibegw.connect();
|
nibegw.connect();
|
||||||
}
|
} else {
|
||||||
else
|
do {
|
||||||
{
|
|
||||||
do
|
|
||||||
{
|
|
||||||
nibegw.loop();
|
nibegw.loop();
|
||||||
#ifdef TRANSPORT_ETH_ENC28J60
|
#ifdef TRANSPORT_ETH_ENC28J60
|
||||||
Ethernet.maintain();
|
Ethernet.maintain();
|
||||||
#endif
|
#endif
|
||||||
} while (nibegw.messageStillOnProgress());
|
} while (nibegw.messageStillOnProgress());
|
||||||
}
|
}
|
||||||
|
|
||||||
if (!ethernetInitialized && now >= ETH_INIT_DELAY)
|
if (!ethInitialized && now >= config.eth.initDelay) {
|
||||||
{
|
|
||||||
initializeEthernet();
|
initializeEthernet();
|
||||||
|
#ifdef ENABLE_DEBUG
|
||||||
|
telnet.begin();
|
||||||
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
|
#if defined(ENABLE_DEBUG) && defined(ENABLE_REMOTE_DEBUG)
|
||||||
|
if (ethInitialized) {
|
||||||
|
handleTelnet();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
|
#if defined(PRODINO_BOARD_ESP32) && defined(ENABLE_DYNAMIC_CONFIG)
|
||||||
|
void loopDynamicConfigMode() {
|
||||||
|
Bleeper.handle();
|
||||||
|
otaServer.handleClient();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
// ######### FUNCTIONS #######################
|
// ######### FUNCTIONS #######################
|
||||||
|
|
||||||
void initializeEthernet()
|
void initializeEthernet() {
|
||||||
{
|
DEBUG_PRINT_MSG(1, "Initializing Ethernet\n");
|
||||||
DEBUG_PRINT(1, "Initializing Ethernet\n");
|
|
||||||
Ethernet.begin(mac, ip, gw, mask);
|
|
||||||
|
|
||||||
#ifdef PRODINO_BOARD
|
uint8_t mac[6];
|
||||||
W5100.setRetransmissionCount(1);
|
sscanf(config.eth.mac.c_str(), "%x:%x:%x:%x:%x:%x", mac, mac+1, mac+2, mac+3, mac+4, mac+5);
|
||||||
#endif
|
|
||||||
|
IPAddress ip;
|
||||||
|
IPAddress dns;
|
||||||
|
IPAddress gw;
|
||||||
|
IPAddress mask;
|
||||||
|
|
||||||
|
ip.fromString(config.eth.ip);
|
||||||
|
dns.fromString(config.eth.dns);
|
||||||
|
gw.fromString(config.eth.gateway);
|
||||||
|
mask.fromString(config.eth.mask);
|
||||||
|
|
||||||
|
Ethernet.begin(mac, ip, dns, gw, mask);
|
||||||
|
|
||||||
ethernetInitialized = true;
|
#if defined(PRODINO_BOARD_ESP32)
|
||||||
udp.begin(INCOMING_PORT_READCMDS);
|
Ethernet.setRetransmissionCount(1);
|
||||||
udp4writeCmnds.begin(INCOMING_PORT_WRITECMDS);
|
Ethernet.setRetransmissionTimeout(50);
|
||||||
|
#elif defined(PRODINO_BOARD)
|
||||||
|
W5100.setRetransmissionCount(1);
|
||||||
|
W5100.setRetransmissionTime(50);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
ethInitialized = true;
|
||||||
|
udp.begin(config.nibe.readCmdsPort);
|
||||||
|
udp4writeCmnds.begin(config.nibe.writeCmdsPort);
|
||||||
|
|
||||||
#ifdef ENABLE_DEBUG
|
printInfo();
|
||||||
DEBUG_PRINTDATA(0, "%s ", BOARD_NAME);
|
|
||||||
DEBUG_PRINTDATA(0, "version %s\n", VERSION);
|
#if defined(PRODINO_BOARD_ESP32)
|
||||||
sprintf(debugBuf, "MAC=%02X:%02X:%02X:%02X:%02X:%02X\n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
|
KMPProDinoESP32.offStatusLed();
|
||||||
DEBUG_PRINT(0, debugBuf);
|
#endif
|
||||||
sprintf(debugBuf, "IP=%d.%d.%d.%d\n", ip[0], ip[1], ip[2], ip[3]);
|
|
||||||
DEBUG_PRINT(0, debugBuf);
|
|
||||||
sprintf(debugBuf, "GW=%d.%d.%d.%d\n", gw[0], gw[1], gw[2], gw[3]);
|
|
||||||
DEBUG_PRINT(0, debugBuf);
|
|
||||||
sprintf(debugBuf, "TARGET IP=%d.%d.%d.%d\n", TARGET_IP);
|
|
||||||
DEBUG_PRINT(0, debugBuf);
|
|
||||||
DEBUG_PRINTDATA(0, "TARGET PORT=%d\n", TARGET_PORT);
|
|
||||||
DEBUG_PRINTDATA(0, "INCOMING_PORT_READCMDS=%d\n", INCOMING_PORT_READCMDS);
|
|
||||||
DEBUG_PRINTDATA(0, "INCOMING_PORT_WRITECMDS=%d\n", INCOMING_PORT_WRITECMDS);
|
|
||||||
DEBUG_PRINTDATA(0, "TARGET PORT=%d\n", TARGET_PORT);
|
|
||||||
DEBUG_PRINTDATA(0, "ACK_MODBUS40=%s\n", ACK_MODBUS40 ? "true" : "false");
|
|
||||||
DEBUG_PRINTDATA(0, "ACK_SMS40=%s\n", ACK_SMS40 ? "true" : "false");
|
|
||||||
DEBUG_PRINTDATA(0, "ACK_RMU40=%s\n", ACK_RMU40 ? "true" : "false");
|
|
||||||
DEBUG_PRINTDATA(0, "SEND_ACK=%s\n", SEND_ACK ? "true" : "false");
|
|
||||||
DEBUG_PRINTDATA(0, "ETH_INIT_DELAY=%d\n", ETH_INIT_DELAY);
|
|
||||||
DEBUG_PRINTDATA(0, "RS485_DIRECTION_PIN=%d\n", RS485_DIRECTION_PIN);
|
|
||||||
#endif
|
|
||||||
}
|
}
|
||||||
|
|
||||||
void nibeCallbackMsgReceived(const byte* const data, int len)
|
void nibeCallbackMsgReceived(const byte* const data, int len) {
|
||||||
{
|
#if defined(PRODINO_BOARD_ESP32)
|
||||||
if (ethernetInitialized)
|
KMPProDinoESP32.setStatusLed(green);
|
||||||
{
|
#endif
|
||||||
|
|
||||||
|
if (ethInitialized) {
|
||||||
sendUdpPacket(data, len);
|
sendUdpPacket(data, len);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
#if defined(PRODINO_BOARD_ESP32)
|
||||||
|
KMPProDinoESP32.offStatusLed();
|
||||||
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
|
int nibeCallbackTokenReceived(eTokenType token, byte* data) {
|
||||||
int nibeCallbackTokenReceived(eTokenType token, byte* data)
|
|
||||||
{
|
|
||||||
int len = 0;
|
int len = 0;
|
||||||
if (ethernetInitialized)
|
if (ethInitialized) {
|
||||||
{
|
if (token == READ_TOKEN) {
|
||||||
if (token == READ_TOKEN)
|
DEBUG_PRINT_MSG(3, "Read token received from nibe\n");
|
||||||
{
|
|
||||||
DEBUG_PRINT(3, "Read token received from nibe\n");
|
|
||||||
int packetSize = udp.parsePacket();
|
int packetSize = udp.parsePacket();
|
||||||
if (packetSize) {
|
if (packetSize) {
|
||||||
|
#if defined(PRODINO_BOARD_ESP32)
|
||||||
|
KMPProDinoESP32.setStatusLed(white);
|
||||||
|
#endif
|
||||||
|
targetIp = udp.remoteIP();
|
||||||
len = udp.read(data, packetSize);
|
len = udp.read(data, packetSize);
|
||||||
DEBUG_PRINTDATA(2, "Send read command to nibe, len=%d, ", len);
|
DEBUG_PRINT_VARS(2, "Send read command to nibe, len=%d, ", len);
|
||||||
DEBUG_PRINT(1, " data in: ");
|
DEBUG_PRINT_MSG(1, " data in: ");
|
||||||
DEBUG_PRINTARRAY(1, data, len)
|
DEBUG_PRINT_ARRAY(1, data, len)
|
||||||
DEBUG_PRINT(1, "\n");
|
DEBUG_PRINT_MSG(1, "\n");
|
||||||
#ifdef TRANSPORT_ETH_ENC28J60
|
|
||||||
udp.flush();
|
#if defined(TRANSPORT_ETH_ENC28J60)
|
||||||
udp.stop();
|
udp4readCmnds.flush();
|
||||||
udp.begin(INCOMING_PORT_READCMDS);
|
udp4readCmnds.stop();
|
||||||
#endif
|
udp4readCmnds.begin(config.nibe.readCmdsPort);
|
||||||
|
#endif
|
||||||
}
|
}
|
||||||
}
|
} else if (token == WRITE_TOKEN) {
|
||||||
else if (token == WRITE_TOKEN)
|
DEBUG_PRINT_MSG(3, "Write token received from nibe\n");
|
||||||
{
|
|
||||||
DEBUG_PRINT(3, "Write token received from nibe\n");
|
|
||||||
int packetSize = udp4writeCmnds.parsePacket();
|
int packetSize = udp4writeCmnds.parsePacket();
|
||||||
if (packetSize) {
|
if (packetSize) {
|
||||||
|
#if defined(PRODINO_BOARD_ESP32)
|
||||||
|
KMPProDinoESP32.setStatusLed(orange);
|
||||||
|
#endif
|
||||||
|
targetIp = udp.remoteIP();
|
||||||
len = udp4writeCmnds.read(data, packetSize);
|
len = udp4writeCmnds.read(data, packetSize);
|
||||||
DEBUG_PRINTDATA(2, "Send write command to nibe, len=%d, ", len);
|
DEBUG_PRINT_VARS(2, "Send write command to nibe, len=%d, ", len);
|
||||||
DEBUG_PRINT(1, " data in: ");
|
DEBUG_PRINT_MSG(1, " data in: ");
|
||||||
DEBUG_PRINTARRAY(1, data, len)
|
DEBUG_PRINT_ARRAY(1, data, len)
|
||||||
DEBUG_PRINT(1, "\n");
|
DEBUG_PRINT_MSG(1, "\n");
|
||||||
#ifdef TRANSPORT_ETH_ENC28J60
|
|
||||||
udp4writeCmnds.flush();
|
#if defined(TRANSPORT_ETH_ENC28J60)
|
||||||
udp4writeCmnds.stop();
|
udp4writeCmnds.flush();
|
||||||
udp4writeCmnds.begin(INCOMING_PORT_WRITECMDS);
|
udp4writeCmnds.stop();
|
||||||
#endif
|
udp4writeCmnds.begin(config.nibe.writeCmdsPort);
|
||||||
|
#endif
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
#if defined(PRODINO_BOARD_ESP32)
|
||||||
|
KMPProDinoESP32.offStatusLed();
|
||||||
|
#endif
|
||||||
}
|
}
|
||||||
return len;
|
return len;
|
||||||
}
|
}
|
||||||
|
|
||||||
void nibeDebugCallback(byte verbose, char* data)
|
void nibeDebugCallback(byte level, char* data) {
|
||||||
{
|
DEBUG_PRINT_MSG(level, data);
|
||||||
DEBUG_PRINT(verbose, data);
|
|
||||||
}
|
}
|
||||||
|
|
||||||
void sendUdpPacket(const byte * const data, int len)
|
void sendUdpPacket(const byte* const data, int len) {
|
||||||
{
|
#ifdef ENABLE_DEBUG
|
||||||
#ifdef ENABLE_DEBUG
|
DEBUG_PRINT_VARS(2, "Sending UDP packet to %s:%d, len=%d", IPtoString(targetIp).c_str(), config.nibe.targetPort, len);
|
||||||
sprintf(debugBuf, "Sending UDP packet to %d.%d.%d.%d:", TARGET_IP);
|
DEBUG_PRINT_MSG(1, " data out: ");
|
||||||
DEBUG_PRINT(2, debugBuf);
|
DEBUG_PRINT_ARRAY(1, data, len)
|
||||||
DEBUG_PRINTDATA(2, "%d", TARGET_PORT);
|
DEBUG_PRINT_MSG(1, "\n");
|
||||||
DEBUG_PRINTDATA(2, ", len=%d, ", len);
|
#endif
|
||||||
DEBUG_PRINT(1, "data out: ");
|
|
||||||
DEBUG_PRINTARRAY(1, data, len)
|
|
||||||
DEBUG_PRINT(1, "\n");
|
|
||||||
#endif
|
|
||||||
|
|
||||||
udp.beginPacket(targetIp, TARGET_PORT);
|
#if defined(PRODINO_BOARD_ESP32)
|
||||||
|
EthernetLinkStatus linkStatus = Ethernet.linkStatus();
|
||||||
|
if (linkStatus != LinkON) {
|
||||||
|
DEBUG_PRINT_VARS(0, "Ethernet link is down, link status = %d\n", linkStatus);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
udp.beginPacket(targetIp, config.nibe.targetPort);
|
||||||
|
|
||||||
udp.write(data, len);
|
udp.write(data, len);
|
||||||
int retval = udp.endPacket();
|
int retval = udp.endPacket();
|
||||||
DEBUG_PRINTDATA(3, "UDP packet sent %s\n", retval == 0 ? "failed" : "succeed");
|
if (retval) {
|
||||||
|
DEBUG_PRINT_MSG(3, "UDP packet sent succeed\n");
|
||||||
|
} else {
|
||||||
|
DEBUG_PRINT_MSG(1, "UDP packet sent failed\n");
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
String IPtoString(const IPAddress& address) {
|
||||||
|
return String() + address[0] + "." + address[1] + "." + address[2] + "." + address[3];
|
||||||
|
}
|
||||||
|
|
||||||
|
void printInfo() {
|
||||||
|
#ifdef ENABLE_DEBUG
|
||||||
|
DEBUG_PRINT_VARS(0, "%s version %s\nUsing configuration:\n", config.boardName.c_str(), VERSION);
|
||||||
|
DEBUG_PRINT_VARS(0, "MAC=%s\n", config.eth.mac.c_str());
|
||||||
|
DEBUG_PRINT_VARS(0, "IP=%s\n", config.eth.ip.c_str());
|
||||||
|
DEBUG_PRINT_VARS(0, "DNS=%s\n", config.eth.dns.c_str());
|
||||||
|
DEBUG_PRINT_VARS(0, "MASK=%s\n", config.eth.mask.c_str());
|
||||||
|
DEBUG_PRINT_VARS(0, "GATEWAY=%s\n", config.eth.gateway.c_str());
|
||||||
|
DEBUG_PRINT_VARS(0, "ETH_INIT_DELAY=%d\n", config.eth.initDelay);
|
||||||
|
DEBUG_PRINT_VARS(0, "TARGET_IP=%s\n", IPtoString(targetIp).c_str());
|
||||||
|
DEBUG_PRINT_VARS(0, "TARGET_PORT=%d\n", config.nibe.targetPort);
|
||||||
|
DEBUG_PRINT_VARS(0, "INCOMING_PORT_READCMDS=%d\n", config.nibe.readCmdsPort);
|
||||||
|
DEBUG_PRINT_VARS(0, "INCOMING_PORT_WRITECMDS=%d\n", config.nibe.writeCmdsPort);
|
||||||
|
DEBUG_PRINT_VARS(0, "SEND_ACK=%s\n", config.nibe.ack.sendAck ? "true" : "false");
|
||||||
|
if (config.nibe.ack.sendAck) {
|
||||||
|
DEBUG_PRINT_VARS(0, "ACK_MODBUS40=%s\n", config.nibe.ack.modbus40 ? "true" : "false");
|
||||||
|
DEBUG_PRINT_VARS(0, "ACK_SMS40=%s\n", config.nibe.ack.sms40 ? "true" : "false");
|
||||||
|
DEBUG_PRINT_VARS(0, "ACK_RMU40=%s\n", config.nibe.ack.rmu40 ? "true" : "false");
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
DEBUG_PRINT_VARS(0, "VERBOSE_LEVEL=%d\n", config.debug.verboseLevel);
|
||||||
|
|
||||||
|
#if defined(ENABLE_DEBUG) && defined(ENABLE_REMOTE_DEBUG)
|
||||||
|
DEBUG_PRINT_MSG(0, "REMOTE_DEBUG_ENABLED=true\n");
|
||||||
|
#else
|
||||||
|
DEBUG_PRINT_MSG(0, "REMOTE_DEBUG_ENABLED=false\n");
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(PRODINO_BOARD_ESP32) && defined(ENABLE_DYNAMIC_CONFIG)
|
||||||
|
DEBUG_PRINT_MSG(0, "DYNAMIC_CONFIG_ENABLED=true\n");
|
||||||
|
#else
|
||||||
|
DEBUG_PRINT_MSG(0, "DYNAMIC_CONFIG_ENABLED=false\n");
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
#if defined(ENABLE_DEBUG) && defined(ENABLE_REMOTE_DEBUG)
|
||||||
|
void handleTelnet() {
|
||||||
|
EthernetClient client = telnet.available();
|
||||||
|
|
||||||
|
if (client) {
|
||||||
|
char c = client.read();
|
||||||
|
|
||||||
|
switch (c) {
|
||||||
|
|
||||||
|
case '?':
|
||||||
|
case 'h':
|
||||||
|
client.println(config.boardName.c_str());
|
||||||
|
client.println("Commands:");
|
||||||
|
client.println(" E -> exit");
|
||||||
|
client.println(" i -> info");
|
||||||
|
#ifdef ENABLE_DEBUG
|
||||||
|
client.println(" 1 -> set verbose level to 1");
|
||||||
|
client.println(" 2 -> set verbose level to 2");
|
||||||
|
client.println(" 3 -> set verbose level to 3");
|
||||||
|
client.println(" 4 -> set verbose level to 4");
|
||||||
|
client.println(" 5 -> set verbose level to 5");
|
||||||
|
#endif
|
||||||
|
break;
|
||||||
|
|
||||||
|
case 'i':
|
||||||
|
printInfo();
|
||||||
|
break;
|
||||||
|
|
||||||
|
case 'E':
|
||||||
|
client.println("Connection closed");
|
||||||
|
client.flush();
|
||||||
|
client.stop();
|
||||||
|
break;
|
||||||
|
|
||||||
|
#ifdef ENABLE_DEBUG
|
||||||
|
case '1':
|
||||||
|
case '2':
|
||||||
|
case '3':
|
||||||
|
case '4':
|
||||||
|
case '5':
|
||||||
|
client.print("Setting verbose level to ");
|
||||||
|
client.println(c);
|
||||||
|
config.debug.verboseLevel = c - 0x30;
|
||||||
|
break;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
case '\n':
|
||||||
|
case '\r':
|
||||||
|
break;
|
||||||
|
|
||||||
|
default:
|
||||||
|
client.print("Unknown command ");
|
||||||
|
client.println(c);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
|
||||||
|
|
@ -19,12 +19,18 @@
|
||||||
#include "NibeGw.h"
|
#include "NibeGw.h"
|
||||||
#include "Arduino.h"
|
#include "Arduino.h"
|
||||||
|
|
||||||
#ifdef HARDWARE_SERIAL
|
#if defined(HARDWARE_SERIAL_WITH_PINS)
|
||||||
|
NibeGw::NibeGw(HardwareSerial* serial, int RS485DirectionPin, int RS485RxPin, int RS485TxPin)
|
||||||
|
#elif defined(HARDWARE_SERIAL)
|
||||||
NibeGw::NibeGw(HardwareSerial* serial, int RS485DirectionPin)
|
NibeGw::NibeGw(HardwareSerial* serial, int RS485DirectionPin)
|
||||||
#else
|
#else
|
||||||
NibeGw::NibeGw(Serial_* serial, int RS485DirectionPin)
|
NibeGw::NibeGw(Serial_* serial, int RS485DirectionPin)
|
||||||
#endif
|
#endif
|
||||||
{
|
{
|
||||||
|
#if defined(HARDWARE_SERIAL_WITH_PINS)
|
||||||
|
this->RS485RxPin = RS485RxPin;
|
||||||
|
this->RS485TxPin = RS485TxPin;
|
||||||
|
#endif
|
||||||
verbose = 0;
|
verbose = 0;
|
||||||
ackModbus40 = true;
|
ackModbus40 = true;
|
||||||
ackSms40 = false;
|
ackSms40 = false;
|
||||||
|
|
@ -44,7 +50,13 @@ void NibeGw::connect()
|
||||||
if (!connectionState)
|
if (!connectionState)
|
||||||
{
|
{
|
||||||
state = STATE_WAIT_START;
|
state = STATE_WAIT_START;
|
||||||
RS485->begin(9600, SERIAL_8N1);
|
|
||||||
|
#if defined(HARDWARE_SERIAL_WITH_PINS)
|
||||||
|
RS485->begin(9600, SERIAL_8N1, RS485RxPin, RS485TxPin);
|
||||||
|
#else
|
||||||
|
RS485->begin(9600, SERIAL_8N1);
|
||||||
|
#endif
|
||||||
|
|
||||||
connectionState = true;
|
connectionState = true;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
@ -377,4 +389,3 @@ boolean NibeGw::shouldAckNakSend(byte address)
|
||||||
|
|
||||||
return false;
|
return false;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -38,7 +38,9 @@
|
||||||
|
|
||||||
#include <Arduino.h>
|
#include <Arduino.h>
|
||||||
|
|
||||||
#define HARDWARE_SERIAL
|
#define HARDWARE_SERIAL_WITH_PINS
|
||||||
|
//#define HARDWARE_SERIAL
|
||||||
|
|
||||||
//#define ENABLE_NIBE_DEBUG
|
//#define ENABLE_NIBE_DEBUG
|
||||||
|
|
||||||
// state machine states
|
// state machine states
|
||||||
|
|
@ -78,10 +80,14 @@ class NibeGw
|
||||||
byte directionPin;
|
byte directionPin;
|
||||||
byte buffer[MAX_DATA_LEN];
|
byte buffer[MAX_DATA_LEN];
|
||||||
byte index;
|
byte index;
|
||||||
#ifdef HARDWARE_SERIAL
|
#if defined(HARDWARE_SERIAL_WITH_PINS)
|
||||||
HardwareSerial* RS485;
|
HardwareSerial* RS485;
|
||||||
|
int RS485RxPin;
|
||||||
|
int RS485TxPin;
|
||||||
|
#elif defined(HARDWARE_SERIAL)
|
||||||
|
HardwareSerial* RS485;
|
||||||
#else
|
#else
|
||||||
Serial_* RS485;
|
Serial_* RS485;
|
||||||
#endif
|
#endif
|
||||||
NIBE_CALLBACK_MSG_RECEIVED;
|
NIBE_CALLBACK_MSG_RECEIVED;
|
||||||
NIBE_CALLBACK_MSG_RECEIVED_TOKEN;
|
NIBE_CALLBACK_MSG_RECEIVED_TOKEN;
|
||||||
|
|
@ -103,10 +109,12 @@ class NibeGw
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
public:
|
public:
|
||||||
#ifdef HARDWARE_SERIAL
|
#if defined(HARDWARE_SERIAL_WITH_PINS)
|
||||||
NibeGw(HardwareSerial* serial, int RS485DirectionPin);
|
NibeGw(HardwareSerial* serial, int RS485DirectionPin, int RS485RxPin, int RS485TxPin);
|
||||||
|
#elif defined(HARDWARE_SERIAL)
|
||||||
|
NibeGw(HardwareSerial* serial, int RS485DirectionPin);
|
||||||
#else
|
#else
|
||||||
NibeGw(Serial_* serial, int RS485DirectionPin);
|
NibeGw(Serial_* serial, int RS485DirectionPin);
|
||||||
#endif
|
#endif
|
||||||
NibeGw& setCallback(NIBE_CALLBACK_MSG_RECEIVED, NIBE_CALLBACK_MSG_RECEIVED_TOKEN);
|
NibeGw& setCallback(NIBE_CALLBACK_MSG_RECEIVED, NIBE_CALLBACK_MSG_RECEIVED_TOKEN);
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue