* Deprecate self.config in skills
Skills should contain their own settings, the self.config concept is being
deprecated.
Also removed the defaults set for several old MycroftAI skills. The 19.02
version of these Skills initializes the default values using:
```python
self.settings["key"] = default
```
* Update padatious config to work with the config property.
- Move "save_utterenaces" comments to correct block
- Correct information, records utterance not wakeword
- replace "record_utterances" with the new "save_utterances"
Normally Mycroft will use the default PortAudio input device as the
microphone input for the user. However in some cases there is reason
to specify a different input.
The "device_index" under the "listener" section in mycroft.conf has
always allowed a user to select the microphone explicitly. But on
some systems the indices can change from reboot to reboot. So this
adds the "device_name" setting. If it exists (and the "device_index"
has not been specified explicitly), a regex match will be run against
the PortAudio device names.
When "device_name" is used, the voice.log will contain a listing of
the devices as they are tested. This can be used to debug if a
name isn't matching as expected.
EXAMPLES:
/etc/mycroft/mycroft.conf
```
{
"listener": {
"device_name": "aawsrc"
}
}
```
Would find a match against "aawsrc" or "aawsrcplug". To force a specific
match, you can use a regex such as "aawsrc$".
/etc/mycroft/mycroft.conf
```
{
"listener": {
"device_index": 2
}
}
```
The PortAudio device index specified will be used.
Names and indexes for PortAudio are difficult to guess. The simplest way to
view them is either enter a value for "device_name" and look at the names
which appear in the log when starting Mycroft, or to run a simple program
such as:
```python
import pyaudio
pa = pyaudio.PyAudio()
for i in range(pa.get_device_count()):
dev = pa.get_device_info_by_index(i)
print((i, dev['name'], dev['maxInputChannels']))
```
The ability to "barge-in" has been lacking from Mycroft Core. The Mark 1
microphone was unable to support this due to physical limitations, but the
Mark II and other implementations with more advanced mic tech which can
hear over themselves are able to continuously listen.
To enable this while retaining backwards compatibility with simpler mic.py
systems, there are now two mycroft.conf values:
{
"listener": {
"mute_during_output" : true,
"duck_while_listening" : 0.3
}
}
The above values are defaults, and implementers will likely override them
using the /etc/mycroft/mycroft.conf file when appropriate.
The duck_while_listening setting is currently handled in Mycroft's
skill-volume. The mute_during_output is handled within mycroft-core itself.
Enclosures
* Create a mechanism to instantiate unique Enclosure classes, depending on the platform found in the SYSTEM mycroft.conf
* Implement a generic Enclosure, which support the new GUI protocol
* Implement a Mark 1 Enclosure (expects the serial connection to an Arduino)
* Implement the start of a Mark II enclosure
* Implement a generic enclosure (no screen)
* Implement the GUI announcement and protocol basics
MycroftSkill
* Implement the basis of the GUI-controlling interfaces. Namely:
- MycroftSkill.show_text()
- MycroftSkill.show_image()
- MycroftSkill.show_html()
- MycroftSkill.show_page()
- MycroftSkill.gui to set values for page displays.
Configuration
* Add "gui_websocket" to the mycroft.config.py
This is reimplementation of #1649 which became divergent.
## Description
Adds a Ogg123Service and a play_ogg exactly like Mpg123Service and play_mp3
## How to test
I have a skill for a podcast which does not have an mp3 feed:
https://github.com/joshuacox/skill-GNUworldOrder
## Contributor license agreement signed?
signed by @joshuacox
* added asynchronous request to mimic2 backend to break up audio into chunks
* add chracter threshold
* refactored split_by_punctuation
* add punctuation function to sentence chunks
* fix spelling
* some more spelling
* added mimic2 in mycroftconf
* removed unused imports
Also strips out old alternative ways to enable wake word upload
The logic for uploading wake words is now:
- Only if opt-in is enabled
- With an additional "disable" setting to selectively prevent it
Lots of minor fixes including, sorting dicts, making ints of strings,
MagicMock file spec and some other things
A couple of issues in the mycroft-core code base were identified and
fixed. Most notably the incorrect version check for python three when
adding basestring.
Update .travis.yml
* Skip skill update on startup if recent
Skills aren't updated on startup if the last update was less than 12
hours ago.
- msm adds a .msm file in the skills directory with a timestamp and a
list of the skills installed by default
- the UPDATING screen message is moved to the SkillManger when direct
update is scheduled.
- On internet connection the skill update time is scheduled
- Skills (other than priority skills) are not loaded until
- The timeout for when direct update is necessary is settable in the
config.
internet connection has been verified (message on messagebus)
* Add support for deepspeech_server
deepspeech_server is a server running deepspeech (obviously). It's quite
easy to install and run (package available in pip and then a config file
pointing to the model)
This pr adds the DeepSpeechServerTTS class, a STT interface allowing
mycroft to use one of these servers.
config needed:
"stt": {
"module": "deepspeech_server",
"deepspeech_server": {
"uri": "http://IP-ADDRESS:PORT/stt"
}
}
* Add deepspeech_server example to mycroft.conf
Add Python 2/3 compatibility
==== Tech Notes ====
This allows the main bus, skills and cli to be run in both python 2.7 and
3.5+.
Mainly trivial changes
- syntax for exceptions
- logic for importing correct Queue module
- .iteritems -> future.utils.iteritems when accessing dicts key value
pairs
* Allow audio service to be run in python 3
* Make speech client work with python 3
* Importing of Queue version dependent
* Exception syntax corrected
* Creating sound buffer is version dependant
- Adapt context use range from builtins
- Use compatible next() instead of .next() when walking the skill
directory
* Make CLI Python 3 Compatible
- Use compatible BytesIO instead of StringsIO
- Open files as text instead of binary
- Make sure integer divisions are used
* Make messagebus send compatible
* Fix failing travis
Re-add future 0.16.0
* Make string checks compatible
* basestring doesn't exist in python 3 so it's imported from the "past"
* Fix latest compatibility issues in speech client
- handle urllib
- handle encoding before calling md5
* Make Api.build_json() python 2/3 compatible
==== Tech Notes ====
Before the refactoring of the configuration system the
ConfigurationManager allowed loading config files directly from strings.
This commit restores that functionality
Several attempts to connect to the backend fail before pairing has
been completed, which was producing errors that prevented the
messagebus and audio services from starting up.
Now the DeviceApi().is_subscriber property returns False if the
check fails, assuming unpaired == not subscribed.
Also stopped logging the call stack on the HTTPError exception, it
made an expected situation look like a major crash.
==== Tech Notes ====
- removed old main.py
- replace reference to ConfigurationManager in api tests
- reset configuration after use in configuration test
- Pep-8 issue
This commit officially switches the mycroft-core repository from
GPLv3.0 licensing to Apache 2.0. All dependencies on GPL'ed code
have been removed and we have contacted all previous contributors
with still-existing code in the repository to agree to this change.
Going forward, all contributors will sign a Contributor License
Agreement (CLA) by visiting https://mycroft.ai/cla, then they will
be included in the Mycroft Project's overall Contributor list,
found at: https://github.com/MycroftAI/contributors. This cleanly
protects the project, the contributor and all who use the technology
to build upon.
Futher discussion can be found at this blog post:
https://mycroft.ai/blog/right-license/
This commit also removes all __author__="" from the code. These
lines are painful to maintain and the etiquette surrounding their
maintainence is unclear. Do you remove a name from the list if the
last line of code the wrote gets replaced? Etc. Now all
contributors are publicly acknowledged in the aforementioned repo,
and actual authorship is maintained by Github in a much more
effective and elegant way!
Finally, a few references to "Mycroft AI" were changed to the correct
legal entity name "Mycroft AI Inc."
==== Fixed Issues ====
#403 Update License.md and file headers to Apache 2.0
#400 Update LICENSE.md
==== Documentation Notes ====
Deprecated the ScheduledSkill and ScheduledCRUDSkill classes.
These capabilities have been superceded by the more flexible MycroftSkill
class methods schedule_event(), schedule_repeating_event(), update_event(),
and cancel_event().
* Add automatic uploading of wake words and learning option in enclosure client
* Spawn new thread and remove ping
Spawning a new thread eliminates the need to ping and eliminates additional latency. In addition, the return code of scp is now used to determine whether to delete the wake word
* Increment enclosure version number
==== Tech Notes ====
Allow cached config to be updated from messagebus, from a skill or other connected software. Listens for configuration.patch signal and updates loaded config.
==== Protocol Notes ====
new messagebus signal configuration.patch
Åke
Matthew D. Scholefield
Chris Rogers
Steve Penrod
Steve Penrod
Francis Tyers
jarbasal
Michael Nguyen
Josh Cox
JarbasAI
reginaneon
Matthew D. Scholefield
Augusto Monteiro 'Sparky