The previous parseFill would try to parse an expression and only unscan
one token when it failed. This caused it to not put back the correct
number of tokens with some expression.
Now it has been modified to check for the fill ident ahead of time and
then use ParseExpr() to parse the call. If the expression fails to parse
into a call, it will send an error instead of trying to continue with an
invalid parser state.
Fixes#6543.
This adds support for using regex expressions in SHOW TAG VALUES when
selecting the key. Also supporting the `!=` operation for the
comparison. Now you can do any of the following:
SHOW TAG VALUES WITH KEY != "region"
SHOW TAG VALUES WITH KEY =~ /region/
SHOW TAG VALUES WITH KEY !~ /region/
It also adds a new SetLiteral AST node that will potentially be used in
the future to allow set operations for other comparisons in the future.
Fixes#4532.
The current code would compare every string literal it crossed and tried
to coerce them to time literals if the _looked_ like date/time strings.
The only time the TimeLiteral was used is when comparing to the the
'time' value in a where clause. This change moves the string parsing
code until we attempt to compare 'time' to a string, at which point we
know we need/want a TimeLiteral, and not just an ordinary string.
Fixes#6727
The default retention policy name is changed to "autogen" instead of
"default" since it ends up being ambiguous when we tell a user to check
the default retention policy, it is uncertain if we are referring to the
default retention policy (which can be changed) or the retention policy
with the name "default".
Now the automatically generated retention policy name is "autogen".
The default retention policy is now also configurable through the
configuration file so an administrator can customize what they think
should be the default.
Fixes#3733.
A query's String method is called multiple times per query. This commit
ensures all calls to query.String share use of a strings.NewReplacer.
This approximately halves the number of allocations for the benchmarked
query.
The parser can be passed a map of keys to literal values to be replaced
into the query. Parameters are preceded by a dollar sign (`$`). If a
parameter key is missing, an error is thrown by the parser.
Fixes#2926.
Casting syntax is done with the PostgreSQL syntax `field1::float` to
specify which type should be used when selecting a field. You can also
do `field1::field` or `tag1::tag` to specify that a field or tag should
be selected.
This makes it possible to select a tag when a field key and a tag key
conflict with each other in a measurement. It also means it's possible
to choose a field with a specific type if multiple shards disagree. If
no types are given, the same ordering for how a type is chosen is used
to determine which type to return.
The FieldDimensions method has been updated to return the data type for
the fields that get returned. The SeriesKeys function has also been
removed since it is no longer needed. SeriesKeys was originally used for
the fill iterator, but then expanded to be used by auxiliary iterators
for determining the channel iterator types. The fill iterator doesn't
need it anymore and the auxiliary types are better served by
FieldDimensions implementing that functionality, so SeriesKeys is no
longer needed.
Fixes#6519.
This commit removes support for `SHOW SERVERS` and `DROP SERVER`
from the `influxql` package. It also removes extraneous cluster
testing code from `cmd/influxd/run`.
Fixes#6465
The optional sections of the command consumed the semicolon token and
didn't put it back for the outer loop. The code shouldn't explicitly
check for a semicolon or EOF anyway, so these checks were removed and
the token gets unscanned if it doesn't match the optional token that the
parser is looking for.
Fixes#6398.
Allows configuration of shard group duration at database creation, and retention
policy create/alter time.
Query examples:
```
CREATE DATABASE testdb WITH DURATION 90d SHARD DURATION 30m NAME rp_testdb
CREATE RETENTION POLICY rp_testdb2 ON testdb DURATION INF REPLICATION 1 SHARD DURATION 30m
ALTER RETENTION POLICY rp_testdb2 ON testdb SHARD DURATION 1h
```
This can be useful with long duration retention policies with lots of data, where
you can split into smaller shards to relieve memory pressure.
This allows multiple semicolons in a row now and also requires that a
semicolon separate commands. The query specification says this is
required, but a boolean error in `ParseQuery` makes one semicolon
optional and multiple semicolons an error.
Fixes#5728.
While this allows a query to be killed, it doesn't really do anything
yet since the interrupt happens only after the first row gets emitted
(the entire first series).
This section of code will likely have to be refactored to make this work
since we need a way to interrupt a currently running iterator.
The currently running queries can be listed with the command
`SHOW QUERIES` and it will display the current commands that have been
run, the database they were run against, and how long they have been
running.
Numbers in the query without any decimal will now be emitted as integers
instead and be parsed as an IntegerLiteral. This ensures we keep the
original context that a query was issued with and allows us to act more
similar to how programming languages are typically structured when it
comes to floats and ints.
This adds functionality for dealing with integers promoting to floats in
the various different places where math are used.
Fixes#5744 and #5629.
Previously if you issued a CQ with a resample interval higher than the
query interval, such as the following:
CREATE CONTINUOUS QUERY cq ON db
RESAMPLE EVERY 4m
BEGIN
SELECT mean(value) INTO cpu_mean FROM cpu GROUP BY time(2m)
END
This would result in strange behavior because the FOR value defaulted to
the GROUP BY interval and the minimum time passing before a CQ ran was
also the resample interval, so it wouldn't run the appropriate intervals
even if you set the resample duration to a higher value.
This tweaks the CQ runner to set the minimum interval before a bucket
becomes capable of running to the lower of the query interval or the
resample interval instead of always using the resample interval.
It also sets the default resample duration to be the higher value of the
query interval or the resample interval so the above query gets a
default of 4m instead of 2m and will execute 2 queries every 4 minutes.
If you manually set the resample duration to a lower value than the
resample interval, the old behavior will still happen and should be
considered an error.
This also makes trying to create a continuous query with a resample
duration of below the resample interval or query interval (whichever is
higher) as an error returned by the parser.
Fixes#5286.
* Add dir, hostname, and bind address to top level config since it applies to services other than meta
* Add enabled flags to example toml for data and meta services
* Wire up add/remove raft peers and meta servers to meta service
* Update DROP SERVER to be either DROP META SERVER or DROP DATA SERVER
* Bring over statement executor from old meta package
* Start meta service client implementation
* Update meta service test to use the client
* Wire up node ID/meta server storage information
This makes the following syntax possible:
CREATE CONTINUOUS QUERY mycq ON mydb
RESAMPLE EVERY 1m FOR 1h
BEGIN
SELECT mean(value) INTO cpu_mean FROM cpu GROUP BY time(5m)
END
The RESAMPLE option customizes how often an interval will be sampled and
the duration. The interval is customized with EVERY. Any intervals
within the resampling duration on a multiple of the resample interval
will be updated with the new results from the query.
The duration is customized with FOR. This determines how long an
interval will participate in resampling.
Both options are optional. If RESAMPLE is in the syntax, at least one of
the two needs to be given. The default for both is the interval of the
continuous query.
The service also improves tracking of the last run time and the logic of
when a query for an interval should be run. When determining the oldest
interval to run for a query, the continuous query service determines
what would have been the optimal time to perform the next query based on
the last run time. It then uses this time to determine the oldest
interval that should be run using the resample duration and will
resample all intervals between this time and the current time as opposed
to potentially forgetting about the last run in an interval if the
continuous query service gets delayed for some reason.
This removes the previous config options for customizing continuous
queries since they are no longer relevant and adds a new option of
customizing the run interval. The run interval determines how often the
continuous query service polls for when it should execute a query. This
option defaults to 1s, but can be set to 1m if the least common factor
of all continuous queries' intervals is a higher value (like 1m).
Jonathan A. Sternberg
Cory LaNou
Joe LeGasse
Mark Rushakoff
Edd Robinson
Ben Johnson
Tait Clarridge
Gabriel Levine
David Norton
Paul Dix
Paulo Pires
Nathaniel Cook
Mark Rushakoff
Mateusz Dymiński
ch33hau
linearb