Updating the help formatting for all of the commands for consistency.
Removed tabs from the output in favor of using spaces so it is more
clear how the output is intended to look.
Truncate the time interval output of the monitor service to be on even
time intervals rather than on every minute based on the start time. This
normalizes the output from the monitor service.
Removing the data only build tag because it is no longer used. It was
previously used for building a data only node from the open source build
that could be used in clustering, but all of the RPC code was removed
since the separation was too much of a hindrance on development whenever
we found a bug.
Since the original purpose of this is now useless, there's no point in
having a confusing build tag around.
Previously, a non-admin could not call "use" in the influx cli since the
`SHOW DATABASES` command requires admin permissions to run. The correct
solution to this is likely to allow non-admins to call `SHOW DATABASES`,
but only see the databases they should be capable of seeing.
Since we don't have this kind of fine-grained authorization yet and
plans for it are still in the works, we do need someway to not
arbitrarily cripple non-admins attempting to use the cli program. This
is a temporary solution that will ignore any authorization errors from
`SHOW DATABASES` if authorization has been set. A warning message will
be printed and the database will be switched. This should be enough to
ensure that there is some warning that you may not have switched to a
valid database while not crippling non-admin users.
A temporary solution for #6397.
Normalize the output for the various help options so they all follow the
same format and display all relevant options.
Removing some of the unused config options from the configuration file
and updating the help documentation. Removing some remaining references
to clustering within the open source version.
Removes the old implementation of `dumptsm`. It was for an older version
of the tsm1 files that is no longer used and now just panics when used
on a tsm1 file. dumptsmdev has been renamed to `dumptsm`, but the old
`dumptsmdev` command still works for compatibility.
Updated `influx_inspect` to use the `FieldDimensions` method instead
(more reliable anyway). The `influx_tsm` program used its own vendored
copy of `FieldCodec` so it is not affected by this change. `FieldCodec`
was only used for the `b1` and `bz1` engines which were removed in 0.12,
but the code that created the field codec was never removed. This
limited the maximum number of fields to 255 even though that restriction
was removed with the `tsm1` engine.
Fixes#6869.
This adds support for using regex expressions in SHOW TAG VALUES when
selecting the key. Also supporting the `!=` operation for the
comparison. Now you can do any of the following:
SHOW TAG VALUES WITH KEY != "region"
SHOW TAG VALUES WITH KEY =~ /region/
SHOW TAG VALUES WITH KEY !~ /region/
It also adds a new SetLiteral AST node that will potentially be used in
the future to allow set operations for other comparisons in the future.
Fixes#4532.
The task manager now acts as its own statement executor so that a custom
statement executor can perform custom actions for KillQueryStatement and
ShowQueriesStatement.
Previously, the goroutine would block for 24 hours and would only check
every 24 hours if the server was closed. Since this never happened, the
goroutine would just be abruptly killed when the main process ended
(since nobody waited for this goroutine to end).
Updating the code to exit when the server is closed immediately and
switching the timer to a ticker instance that can be stopped.
This switch the backup shard call to use the shard Snapshot that
internally creates a snapshot by hardlinking all of the TSM and
tombstone files instead. This reduces the time that the FileStore
is locked and will allow for larger shards to be backup more easily.
If all points in a series are timestamped in the future, the SHOW
queries will not return anything from these series.
This commit changes the to time used when querying shards for the SHOW
queries to the maximum time, in order to ensure future points are
considered in the results for these queries.
Fixes#6599.
The default retention policy name is changed to "autogen" instead of
"default" since it ends up being ambiguous when we tell a user to check
the default retention policy, it is uncertain if we are referring to the
default retention policy (which can be changed) or the retention policy
with the name "default".
Now the automatically generated retention policy name is "autogen".
The default retention policy is now also configurable through the
configuration file so an administrator can customize what they think
should be the default.
Fixes#3733.
If you use a statement like this:
SELECT value FROM one..cpu, two..cpu
It will access both the `one` and `two` databases as if you had selected
the `cpu` measurement twice for both of them. Updated the `tsdb.Shard`
create iterator function to filter out any sources that do not apply to
that shard so this duplication doesn't happen.
Fixes#6701.
Casting syntax is done with the PostgreSQL syntax `field1::float` to
specify which type should be used when selecting a field. You can also
do `field1::field` or `tag1::tag` to specify that a field or tag should
be selected.
This makes it possible to select a tag when a field key and a tag key
conflict with each other in a measurement. It also means it's possible
to choose a field with a specific type if multiple shards disagree. If
no types are given, the same ordering for how a type is chosen is used
to determine which type to return.
The FieldDimensions method has been updated to return the data type for
the fields that get returned. The SeriesKeys function has also been
removed since it is no longer needed. SeriesKeys was originally used for
the fill iterator, but then expanded to be used by auxiliary iterators
for determining the channel iterator types. The fill iterator doesn't
need it anymore and the auxiliary types are better served by
FieldDimensions implementing that functionality, so SeriesKeys is no
longer needed.
Fixes#6519.
Accidentally used `FromToml()` when trying to read from a file path
rather than `FromTomlFile()` which will read the file and then call
`FromToml()`.
Fixes#6578.
This commit changes the `SeriesIterator` to process one measurement
at a time and uses a `floatFastDedupeIterator` to avoid point
encoding during deduplication.
An offset of `time(1m, now())` will anchor the offset to the current
time of the query. The default offset is `0s` which is the current
default anyway.
This fixes#2074 by making time zone offset support unnecessary. Time
comparisons can use timezones inside of the time clause and the offset
needed for non-hour timezone differences can be used as part of the
offset argument.
The time of the point will be returned with a selector when there is no
group by interval and when there is only one selector. Any other
conditions will return the start time of the interval.
Fixes#5890.
In order to follow REST a bit more carefully, all write operations
should go through a POST in the future. We still allow read operations
through either GET or POST (similar to the Graphite /render endpoint),
but write operations will trigger a returned warning as part of the JSON
response and will eventually return an error.
Also updates the Golang client libraries to always use POST instead of
GET.
Fixes#6290.
This also removes the dependency on `os/user` and uses the `HOME`
environment variable which is more common on Linux and Mac OS X for
customizing the history file location.
Removing this import also lets the `influx` binary be cross-compiled as
`os/user` relies on cgo.
There are two TSMIndex implementations, the directIndex and the
indirectIndex. Originally, we only had the directIndex and later
added the indirectIndex and NewTSMReaderWithOptions in order to
allow both indexes to be used in tests and code. This has created
a problem since we really only use the directIndex for writing and
always use the indirectIndex for reading.
This changes removes the NewTSMReaderWithOptions func so that it is
no longer possible to create a TSMReader with a directIndex. This
will allow a lot of the block reading code used by the directIndex
to be removed and simplify maintainence. It also gives better test
coverage of the code that is actually used by the TSM engine now.
This commit removes support for `SHOW SERVERS` and `DROP SERVER`
from the `influxql` package. It also removes extraneous cluster
testing code from `cmd/influxd/run`.
Fixes#6465
The config path previously could only be specified through the command
line options. This made it very difficult to set a default config path
without using any option.
Now the environment variable can be set so the default configuration
path is set to a specific place, but can be overwritten using the
command line option.
The primary purpose of this is so the Docker container can have a
default configuration file, but not have to parse the command line
options to figure out if a different configuration file has been
specified while still allowing the user to only type `influxd` and have
the program start correctly.
This might also help #6392 as it would allow a default configuration
location to be included with the package by setting an environment
variable.
A default search path is also provided now with checking the following
paths for a config file when none is specified:
* `~/.influxdb/influxdb.conf`
* `/etc/influxdb/influxdb.conf`
The config command has also been modified to read this config file
before outputting a sample config.
This has various benefits:
- Users embedding InfluxDB within other Go programs can specify a different logger / prefix easily.
- More consistent with code used elsewhere in InfluxDB (e.g. services, other `run.Server.*` fields, etc).
- This is also more efficient, because it means `executeQuery` no longer allocates a single `*log.Logger` each time it is called.
When a GROUP BY or multiple sources are used, the top level limit
iterator requires reading the entire iterator stream so it can find all
of the tag groups it needs to return. For large data series, this ends
up with the limit iterator discarding a lot of output.
This change adds a new lower level limit iterator on each series itself
so that there are fewer data points that have to be thrown away by the
top level iterator.
Fixes#5553.
For aggregate queries, derivatives will now alter the start time to one
interval behind and will use that interval to find the derivative of the
first point instead of giving no value for that interval. Null values
will still be discarded so if the interval before the one you are
querying is null, then it will be discarded like if it were in the
middle of the query. You can use `fill(0)` to fill in these values.
This does not apply to raw queries yet.
Also modified the derivative and difference aggregates to use the stream
iterator instead of the reduce slice iterator for space efficiency.
Fixes#3247. Contributes to #5943.
The deprecated message is now attached to a new attribute returned with
the results. This message can then be read by clients to warn a user
about upcoming changes to the query engine.
The `influx` client has already been modified to read this message and
print it out for every format except CSV.
The first warning message is a deprecated message about removing `IF NOT
EXISTS` from `CREATE DATABASE`.
The message will also be printed to the server log.
Fixes#5707.
Now it is possible to compare tags and fields and it is also now
possible to compare tags and tags. Previously, it was only possible to
compare fields with fields and tags with a string or a regex.
Fixes#3371.
This commit makes a number of performance improvements to
reduce allocations during query execution. Several objects
and buffers are now reused across the components to avoid
allocations.
Previously a simple `count(value)` query across 1M points
would require 26,000+ allocations. After the changes in
this commit that number has been reduced to 88.
The tsdb package can't have a dependency on the meta package so it takes
a slice of uint64 types. The clustering implementation needs the full
ShardInfo to know the shard owners though, so a different implementation
needs to be used by clustering.
The `*tsdb.Store` type gets wrapped in the cluster package so it can
implement the `IteratorCreator` function without having a dependency on
the meta package.
The QueryExecutor had a lot of dead code made obsolete by the query
engine refactor that has now been removed. The TSDBStore interface has
also been cleaned up so we can have multiple implementations of this
(such as a local and remote version).
A StatementExecutor interface has been created for adding custom
functionality to the QueryExecutor that may not be available in the open
source version. The QueryExecutor delegate all statement execution to
the StatementExecutor and the QueryExecutor will only keep track of
housekeeping. Implementing additional queries is as simple as wrapping
the cluster.StatementExecutor struct or replacing it with something
completely different.
The PointsWriter in the QueryExecutor has been changed to a simple
interface that implements the one method needed by the query executor.
This is to allow different PointsWriter implementations to be used by
the QueryExecutor. It has also been moved into the StatementExecutor
instead.
The TSDBStore interface has now been modified to contain the code for
creating an IteratorCreator. This is so the underlying TSDBStore can
implement different ways of accessing the underlying shards rather than
always having to access each shard individually (such as batch
requests).
Remove the show servers handling. This isn't a valid command in the open
source version of InfluxDB anymore.
The QueryManager interface is now built into QueryExecutor and is no
longer necessary. The StatementExecutor and QueryExecutor split allows
task management to much more easily be built into QueryExecutor rather
than as a separate struct.
After adding type-switches to the tsm1 packages, the custom
implementation found in the conversion tool broke. This change uses
tsm1.NewValue() instead of a custom implementation.
This change also ensures that the tsm1.Value interface can only be
implemented internally to allow for the optimized type-switch based
encoding
The simple moving average will gradually emit points instead of waiting
until the end. This should apply to derivative and difference in the
future too.
Fixes#6112.
Related to #6140, but won't actually fix that problem. It will correctly
stop new queries from being started during shutdown and will send the
interrupt signal to queries during shutdown.
Since the interrupt signal is asynchronous, there isn't currently a way
to wait for the queries to complete themselves before shutting down the
engine.
The difference function is implemented very similar to how derivative is
implemented. It is an aggregate function that acts over the entire
aggregate. This function will also have the same problems that
derivative has with getting values from the previous interval or point.
This will be fixed separately as part of #5943.
Fixes#1825.
Allows configuration of shard group duration at database creation, and retention
policy create/alter time.
Query examples:
```
CREATE DATABASE testdb WITH DURATION 90d SHARD DURATION 30m NAME rp_testdb
CREATE RETENTION POLICY rp_testdb2 ON testdb DURATION INF REPLICATION 1 SHARD DURATION 30m
ALTER RETENTION POLICY rp_testdb2 ON testdb SHARD DURATION 1h
```
This can be useful with long duration retention policies with lots of data, where
you can split into smaller shards to relieve memory pressure.
This commit adds a configurable limit to the number of series that
can be returned from a `SELECT` statement. The limit is checked
immediately after planning and is determined by the use of iterator
stats.
Fixes#6076
If an OR was used, merging filters between different expressions would
not work correctly. If one of the sides had a set of series ids with a
condition and the other side had no series ids associated with the
expression, all of the series from the side with a condition would have
the condition ignored. Instead of defaulting a non-existant series
filter to true, it should just be false and the evaluation of the one
side that does exist should take care of determining if the series id
should be included or not. The AND condition used false correctly so did
not have to be changed.
If a tag did not exist and `!=` or `!~` were used, it would return false
even though the neither a field or a tag equaled those values. This has
now been modified to correctly return the correct series ids and the
correct condition.
Also fixed a panic that would occur when a tag caused a field access to
become unnecessary. The filter using the field access still got created
and used even though it was unnecessary, resulting in an attempted
access to a non-initialized map.
Fixes#5152 and a bunch of other miscellaneous issues.
The currently running queries can be listed with the command
`SHOW QUERIES` and it will display the current commands that have been
run, the database they were run against, and how long they have been
running.
These were all b1/bz1 settings that no longer have any effect:
- {Default,}MaxWALSize
- {Default,}WALFlushInterval
- {Default,}WALPartitionFlushDelay
- {Default,WAL}ReadySeriesSize
- {Default,WAL}CompactionThreshold
- {Default,WAL}MaxSeriesSize
- {Default,WAL}FlushColdInterval
- {Default,WAL}PartitionSizeThreshold
Numbers in the query without any decimal will now be emitted as integers
instead and be parsed as an IntegerLiteral. This ensures we keep the
original context that a query was issued with and allows us to act more
similar to how programming languages are typically structured when it
comes to floats and ints.
This adds functionality for dealing with integers promoting to floats in
the various different places where math are used.
Fixes#5744 and #5629.
Normalize the time for the distinct() call to either be at the beginning
of the group by interval or the start time similar to every other call.
The timestamp previously just showed the first time found and didn't
make a lot of sense in the context of what the function was supposed to
do.
Fixes#6040.
0.11 no longer uses some files from 0.10. The code was a little
too aggressive and remove these files which would break rolling back
to 0.10 if necessary. Since shards must be migrated to tsm before
upgrading to 0.11 and a user might not know they still have old shard
formats, they would not be able to revert back to 0.11 and migrate
them.
Also adds uptime stats to usage data.
`SHOW TAG VALUES` output has been modified to print the measurement name
for every measurement and to return the output in two columns: key and
value. An example output might be:
> SHOW TAG VALUES WITH KEY IN (host, region)
name: cpu
---------
key value
host server01
region useast
name: mem
---------
key value
host server02
region useast
`measurementsByExpr` has been taught how to handle reserved keys (ones
with an underscore at the beginning) to allow reusing that function and
skipping over expressions that don't matter to the call.
Fixes#5593.
This should fix#5865
This commit also removes the dependecy on the influxql package constants
that were used to write b1 and bz1 files and have changed since the
release of 0.10
- Removed a lot of unused code
- Consolidated types
- Improved allocations for converting b1 shards
- Eliminated allocations when sorting cursors
- Eliminated allocations from removing NaN and Infinity values,
they are removed by the cursors now
- Separated out the stats from the conversion tracker
- Removed allocations from shard reader buffers
- Improved logic for shard reader Next()/Read()
Related to #4098
Lint cmd/influxd/
* Errors cannot end with punctuation
* Better comment for exported method
* Better control flow when return is present
Signed-off-by: Goutham Veeramachaneni <cs14btech11014@iith.ac.in>
Linted cmd/influx_tsm
* Added comments to exported fields
* Removed punctuation at the end of errors
Signed-off-by: Goutham Veeramachaneni <cs14btech11014@iith.ac.in>
Linted cmd/influx_tsm/b1 and cmd/influx_tsm/bz1
* Added comments to exportes fields
Signed-off-by: Goutham Veeramachaneni <cs14btech11014@iith.ac.in>
Linted cmd/influx_tsm/tsdb
* Added comments to exported fields
* range k, _ := can be written as range k :=
* removed else when return is present
* Added consistency to receiver names in methods
Signed-off-by: Goutham Veeramachaneni <cs14btech11014@iith.ac.in>
Fix typos
Signed-off-by: Goutham Veeramachaneni <cs14btech11014@iith.ac.in>
Fixes#5612, #5573 and #5518.
Using the MetaExecuter, queries that need to run on both data nodes
and optionally the meta store will be executed across all data nodes
in the cluster.
This fixes a regression introduced in #5757 due to the node.ID getting
assigned by both the meta and data services. When both roles are active,
the data CreateDataNode path was not getting called because a node ID was
already assigned.
This fixes the issue by seeing if a DataNode already exists for our node
ID, and if it does not, we create one.
This fixes a couple of issues with starting meta-only nodes.
1. We were always calling CreateDataNode regardless of whether the the
node is running data services. We only call that now when node is
data enabled.
2. The node.json was created along-side creating the data node. Since
we are not creatinga a data node, this didn't happen anymore. There
wasn't a simple way to do this in one place so it's actually handle
for when creating a meta or a data node now. Since the ID assigned
to the node is the same regardless of role this works in all combinations
of roles.
3. The JoinMetaServer didn't return the ID of the joining node which
created some races when multiple nodes were joining. The join call now
returns that information to the caller.
Fixes#5754
The join option was incorrectly exposed on the meta config. It should
be at the top-level as a string and propogate down to the meta config
as a slice.
This fixes several issues related to the bind address and hostname:
* Allows bind addresses where a hostname or IP is not specified to
work correct and bind to all interfaces by default.
* Fixes the top-level "hostname" config option to allow overridding
all bind address hostnames. This allows a node to advertise a different
hostname than what is defined in the bind address setting.
* Adds the -hostname command-line option back to allow specifing
both -join and -hostname as command-line flags.
* Enforces a configuration precedence and overriding ability defined
as config file is overridden by env vars which are overriden by command-line
flags.
Fixes#5670#5671
The name of the column will be every measurement located inside of the
math expression in the order they are encountered in within the
expression.
Also handle `*influxql.ParenExpr` in the function
`(*influxql.Field).Name()`
Fixes#5730.
Previously, meta.Client would drop the default retention policy when
trying to create a database with a retention policy. The RPC has now
been modified to include the desired retention policy in the
CreateDatabase command and have it use that retention policy information
instead of the default configuration when provided.
This also lowers the number of RPC calls for
CreateDatabaseWithRetentionPolicy to only a single RPC call instead of
two.
Protections have also been included so creating a retention policy with
different parameters will return an error similar to if you tried to
modify the retention policy separately.
Fixes#5696.
A case (#5606) was found where a lot of data unexpectedly disappeared from a database
following a TSM conversion.
The proximate cause was an inconsistency between the root Bolt DB bucket list
and the meta data in the "series" bucket of the same shard. There were apparently valid
series in Bolt DB buckets that were no longer referenced by the meta data
in the "series" bucket - so-called orphaned series; since the conversion
process only iterated across the series found in the meta data, the conversion process
caused the orphaned series to be removed from the converted shards. This resulted in the
unexpected removal of data from the TSM shards that had previously been accessible
(despite the meta data inconsistency) in the b1 shards.
The root cause of the meta data inconsistency in the case above was a failure, in versions prior
to v0.9.3 (actually 3348dab) to update the "series" bucket with series that had been created in
previous shards during the life of the same influxd process instance.
This fix is required to avoid data loss during TSM conversions for shards that were created with
versions of influx that did not include 3348dab (e.g. prior to v0.9.3).
Analysis-by: Jon Seymour <jon@wildducktheories.com>
This removes the MetaServers property from node.json to eliminate one
of the four places those addresses are stored on disk. We always use
the values that come through the config (via file, env var or -join arg).
Cory LaNou
Jonathan A. Sternberg
Jason Wilder
Cameron Sparr
Jack Zampolin
Paul Dix
Jason Wilder
Edd Robinson
David Norton
Nathaniel Cook
Ben Johnson
Todd Persen
Seif Lotfy
Philip O Toole
kun
Stephen Gutekanst
Seif Lotfy
Jonathan A. Sternberg
gunnaraasen
Gunnar
Joe LeGasse
Tait Clarridge
Mark Rushakoff
Sean Beckett
Michael Desa
Ross McDonald
Goutham Veeramachaneni
Chris Ramón
Kostas Botsas
Nicholas Katsaros