* chore: update to go 1.19.6
* chore: gofmt
* test: fix tests for sort order change
* chore: generate pb
* feat: upgrade flux to v0.188.0 (#23911)
* feat: upgrade flux to 0.171.0
Tests failing, safety commit
First step in https://github.com/influxdata/influxdb/issues/23815
* fix: remove "org" parameter" from writeOptSource
I attempted to implement the "orgOpt" argument in a similar fashion
to f6669f7512. However, it looks like Flux doesn't accept "org" as
a parameter to "load". It responds with:
Error calling function \"load\" @113:16-113:30: error calling function \"to\" @6:19-6:47: unused arguments [org]
This brings us from 194 passing to 570 passing.
* fix: temporarily disable broken flux tests
These tests expect rows to be stored in a certain order. However,
nothing is specifying the sort order. This has been fixed in a
later update to flux: (see 3d6f47ded).
Temporarily disable these tests until we include a fixed
version of the flux tests.
* chore: add tests from a492993012
This fixes "test-flux.sh" so it runs tests within the "flux/"
directory. This uncovered some other issues with the tests
located within "flux/". These also needed to be updated
to match the newer flux API.
* feat: upgrade flux to 0.172.0
This includes changes made in "cbbf4b27da". Since "test.go" in 2.x
diverged from 1.x, some modifications were required to make this
compatible.
* feat: upgrade flux to 0.173.0
* feat: upgrade flux to v0.174.0
* fix: Update the condition when reseting cursor (#23522)
Filters that contain `or` may change between cursor resets so we must remember to update the condition in the read cursor.
```flux
|> filter(fn: (r) => ((r["_field"] == "field1" and r["_value"]==true) or (r["_field"] == "field2" and r["_value"] == false)))
```
Closes https://github.com/influxdata/flux/issues/4804
* feat: upgrade flux to 0.174.1
* feat: upgrade flux to 0.175.0
* chore: remove end-to-end tests
These were removed in a492993 for 2.x. These tests prevent "go test ./..."
from completing. As stated in the original commit, these tests should now be
handled by the "fluxtest" harness.
* feat: upgrade flux to 0.176.0
Some tests needed to be disabled within the flux harness. This is a
result of enabling "Optimize Aggregate Window" in flux@05a1065f.
These tests are not present in 2.x. Therefore, I am unsure if
the breakage is resolved in a later commit.
* feat: upgrade flux to 0.177.0
* feat: upgrade flux to 0.178.0
* feat: upgrade flux to v0.179.0
This removes all invocations of "flux.RegisterOpSpec". According
to flux@e39096d5, "flux.RegisterOpSpec" does nothing in the
current version of flux and was removed.
* chore: update fluxtest skip list (#23633)
* chore: manually backport 785a465e9a
This removes the reference to "flux.Spec".
* build(flux): update flux to v0.181.0 (#23682)
* build(flux): update flux to v0.184.2
* chore: skip more Flux acceptance tests
There are issues for each skip detailed in test-flux.sh.
* feat: upgrade flux to v0.185.0
This adds "FluxTesting" to the "HTTPD" configuration. This option is
hidden and disabled by default. When "FluxTesting" is set, it
enables the default testing flags for "Flux".
These flags allow the "vectorized float tests" and tests requiring
the "removeRedundantSortNodes" and "labelPolymorphism" flag
enabled to work. These changes are based off of d8553c002e.
flux@3d6f47ded is included within this version of Flux. Therefore
we can now include the "group_*" tests.
* feat: upgrade flux to 0.186.0
* feat: upgrade flux to 0.187.0
* feat: upgrade flux to 0.188.0
* fix: re-run ./generate.sh with updated protoc
* fix: restrict cores to match CircleCI documentation
Co-authored-by: davidby-influx <dbyrne@influxdata.com>
Co-authored-by: Markus Westerlind <marwes91@gmail.com>
Co-authored-by: Sean Brickley <sean@wabr.io>
Co-authored-by: Jonathan A. Sternberg <jonathan@influxdata.com>
Co-authored-by: Christopher M. Wolff <chris.wolff@influxdata.com>
---------
Co-authored-by: Brandon Pfeifer <bpfeifer@influxdata.com>
Co-authored-by: davidby-influx <dbyrne@influxdata.com>
Co-authored-by: Markus Westerlind <marwes91@gmail.com>
Co-authored-by: Sean Brickley <sean@wabr.io>
Co-authored-by: Jonathan A. Sternberg <jonathan@influxdata.com>
Co-authored-by: Christopher M. Wolff <chris.wolff@influxdata.com>
* fix: Change from RewriteExpr to PartitionExpr
Also remove some dead code
* feat: WITH KEY implementation
* feat: query rewriting for WITH KEY in SHOW TAG KEYS
This patch protects an internal map for concurrent use.
(*LogFile).Writes() method calls
(*LogFile).createMeasurementIfNotExists() which writes to a shared map.
(*LogFile).Writes() acquires a read-lock which leaves
createMeasurementIfNotExists() open to concurrent writes to its shared
map.
This commit adds the ExecEntries method to the *LogFile type so that we
can properly lock calls to (*LogFile).appendEntry() using defer.
(*LogFile).ExecEntries() is used to mostly replace the body of
(*LogFile).Writes() and incurs another function call since ExecEntries()
can't be inlined. Below is the output of build with "-m -m -m" gcflags:
./log_file.go:1076:6: cannot inline (*LogFile).ExecEntries: unhandled op DEFER
The performace impact of the additional function call should be
negligable and is outwieghed by the safety and simplicity of using
defer.
This commit quiets staticcheck's warnings about "unnecessary use of
fmt.Sprintf" and "unnecessary use of fmt.Sprint".
Prior to this commit we were wrapping simple constant strings without
any formatting verbs with fmt.Sprintf().
We were seing segfaults in Roaring bitmaps sometimes, under very
high load with networked drives. This may reduce risk of segfault by
forcing marshalling to copy the data.
* fix: access tsi active log file with READ lock
The activeLogFile pointer may be altered by other routine so the READ
lock is needed.
* Merge pull request #16384 from foobar/tsi-partition-lock
fix: access tsi active log file with READ lock
Co-authored-by: Tristan Su <sooqing@gmail.com>
Co-authored-by: David Norton <dgnorton@gmail.com>
Prior to this change, new series would be added to the series file
before checking the series cardinality limit. If the limit was exceeded,
the write was rejected even though the series had already been added to
the series file.
Fixes#15859
This commit fixes a defect in the TSI index where a filter using the
negated equality operator would result in no matching series being
returned for series stored within the `IndexFile` portions of the index.
The root cause of this was due to missing legacy-handling code in the
index for this particular iterator.
Fixes#10052
This commit fixes an issue where field keys would reappear in results
when querying previously dropped measurements.
The issue manifests itself when duplicates of a new series are inserted
into the `inmem` index. In this case, a map that tracks the number of
series belonging to a measurement was incorrectly incremented once for
each duplication of the series. Then, when it came time to drop the
measurement, the index assumed there were several series belonging to
the measurement left in the index (because the counter was higher than
it should be). The result of that was that the `fields.idx` file (which
stores a mapping between measurements and field keys) was not truncated
and rebuilt. This left old field keys in that file, which were then
returned in subsequent queries over all field keys.
Previously it was possible to set IDs on a `nil` entry which would
in turn cause a panic. If this panic was recovered by the server
then it would result in a mutex in the `inmem` index staying locked
indefinitely.
In the case of caching TSI bitmaps belonging to immutable .tsi files,
the underlying bitset data can be mmapped. It is possible, though rare,
for this data to be unmapped (e.g., via a TSI compaction) but for the
cached bitmap to be subsequently read. This leads to a segfault.
This only happens when copy-on-write is set to true on the roaring
bitmap, because in that case only the internal pointers are cloned.
This change will reduce the TSI cache performance by around 10%, which I
have deemed to account for only a few microseconds typically.
This commit adds a config option to the tsdb Config allowing the size of
the bitset cached in the TSI index to be specified.
Setting the cache size to 0 will disable the cache.
Before this, if you deleted everything with `delete where true`
for example, then you would be left with all of your measurements
in the fields index. That would cause ghost fields to reappear
if someone reinserted to the measurement.
This fixes that by making it so the deepest most delete code
checks if the measurement was removed from the index, and if so
cleaning it up out of the fields index.
Additionally, it fixes bugs in that cleanup code where if you had
a measurement like "m1" and "m10", when iterating over the cache
or file store, "m1" would match "m10" due to it only checking the
prefix. This also has it check the character right after the
measurement to be either a comma because tags started, or the first
character of the field separator.
davidby-influx
Jeffrey Smith II
Dane Strandboge
lifeibo
Dane Strandboge
Sam Arnold
Tristan Su
Ayan George
dengzhi.ldz
Ben Johnson
docmerlin (j. Emrys Landivar)
Edd Robinson
David Norton
Jeff Wendling
Ben Wells
Jeff Wendling
ludweeg