ebf71969dc
Update adding.markdown ( #13631 )
...
Changed the JSON is_failed part to YAML as this is the new standard in Homeassistant
2020-05-31 11:34:47 +02:00
ad1f93d5e2
Zooz Device Specific updates ( #13617 )
...
- Zen27 config update to reflect the min value of 0 for parameter 9
- ZSE29 config parameters added and are valid for firmware 2.0
2020-05-29 00:34:41 +02:00
680d492ccc
Adding GoControl HUSBZB-1 stick to Z-Wave docs ( #13481 )
...
Closes #13376
2020-05-18 11:00:02 +02:00
036b575a93
Add config for Zooz Zen16 ( #13323 )
2020-05-07 08:24:25 +02:00
2f52271d00
Zooz zen30 update ( #13126 )
...
* Update Zooz Heading
Update Zooz heading to better account for more devices.
* Add Zen30 Config
Added Zen30 CommandClass id="112" config
* Add Scene config for Zen30
Add Scene config for Zen30
* Add Held/Release events for Zen30
Add Held/Release events for Zen30
2020-04-22 12:55:29 +02:00
226308a6f2
Updated intro on central scene configuration ( #13052 )
...
It is not necessary to stop Home Assistant. Is is enough to stop Z-Wave network.
2020-04-19 13:22:45 +02:00
1171f2585b
Add the network key to options.xml file ( #13000 )
...
* Add the network key to options.xml file
For the z-wave secure devices to connect properly. In addition to modifying the configuration.yaml file, the options.xml file network key must be set as well:
* Update source/_docs/z-wave/installation.markdown
Co-Authored-By: Klaas Schoute <klaas_schoute@hotmail.com>
* ✏️ Tweak
Co-authored-by: Klaas Schoute <klaas_schoute@hotmail.com>
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
2020-04-17 10:47:50 +02:00
dd87269ecf
Zooz device config documentation ( #12998 )
...
- Updated Zen26 and Zen27 config documentation for the latest firmware
- Added Zen21v2 and Zen22v2 config documentation for the latest firmware
2020-04-16 22:33:23 +02:00
2dc615acd5
Add Z-Wave troubleshooting for udev device file naming ( #12725 )
2020-04-06 18:33:13 +02:00
3000010a3c
Added Logicgroup ZDB5100 Matrix ( #12371 )
...
The ZDB5100 Matrix is finding its way into OpenZWave: https://github.com/OpenZWave/open-zwave/pull/1906
2020-03-14 23:17:56 +01:00
52eda4fda1
Replace "docs" with "documentation" ( #12284 )
...
* Replace "docs" with "documentation"
* Blacklist docs in Textlint, use documentation instead
* Fix more occurances
Co-authored-by: Franck Nijhof <git@frenck.dev>
2020-03-10 16:17:06 +01:00
aa7a018464
Change i.e. and e.g. to i.e.,, and e.g., ( #12162 )
...
* Change i.e. and e.g. to i.e.,, and e.g.,
* Update textlintrc.json
* Update .textlintrc.json
Co-Authored-By: Franck Nijhof <frenck@frenck.nl>
* added i.e.,
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
2020-02-22 20:50:26 +01:00
fb08878719
Re-branding; part 1 ( #12076 )
...
* Re-branding; part 1
* Update source/_docs/configuration/troubleshooting.markdown
Co-Authored-By: Paulus Schoutsen <balloob@gmail.com>
* Update source/_docs/configuration/yaml.markdown
Co-Authored-By: Paulus Schoutsen <balloob@gmail.com>
* Process review suggestions
* Remove Porosity page
* Update source/_docs/z-wave/installation.markdown
Co-Authored-By: Paulus Schoutsen <balloob@gmail.com>
* Process review suggestions
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
2020-02-13 19:39:47 +01:00
5c9dc17328
Extends textlint Terminology list; part 6 ( #12074 )
2020-02-13 16:30:14 +01:00
6ead12efbc
Extends textlint Terminology list; part 5 ( #12072 )
...
* Extends textlint Terminology list; part 5
* Remove walkthrough from textlint
* Improve Default Configuration page links
2020-02-13 13:39:06 +01:00
f0d37f49db
Extends textlint Terminology list; part 2 ( #12068 )
2020-02-12 19:59:10 +01:00
752dec4047
Adds Terminology Textlint plugin, fixes use of Home Assistant ( #12063 )
2020-02-12 11:16:02 +01:00
8301e75205
Change reference of hass.io to supervisor ( #12011 )
2020-02-08 00:01:18 +01:00
04712c4628
Spelling and Markdown fixes: Part 4
2020-01-29 11:57:44 +01:00
74d8fec905
Spelling and Markdown fixes: Part 3 ( #11902 )
...
Spelling and Markdown fixes: Part 3
2020-01-29 00:25:00 +01:00
25759149bf
Spelling and Markdown fixes: Part 2 ( #11900 )
...
* Spelling and Markdown fixes: Part 2
* ✏️ Fix table
Co-authored-by: Klaas Schoute <klaas_schoute@hotmail.com>
2020-01-28 22:46:19 +01:00
b617bcef79
Spelling and Markdown fixes: Part 3
2020-01-28 21:26:01 +01:00
0606595f91
Fixed header styling ( #11801 )
...
This improves readability
2020-01-18 21:49:30 +01:00
b6a904933b
Code blocks ( #11648 )
...
* Run black on Python code blocks, syntax fixes
https://github.com/scop/misc/blob/master/black_markdown.py
* Code block language marker fixes
* String formatting style tweaks
2020-01-07 12:58:15 +01:00
301edb9bd2
Home Assistant etc spelling consistency fixes ( #11637 )
...
* Be consistent with Home Assistant spelling
* Refer to the Configurator without "HASS"
That's what's it calls itself and how it is in the add-on store.
* Be consistent with Hass.io spelling
* Tell vscode to spell HassOS like that
2020-01-05 12:44:21 +01:00
01f101ddbb
Improved wording for ModemManager troubleshooting ( #11599 )
...
Users experiencing issues / interference by ModemManager are still commonly popping up in the forum. I changed the wording, so hopefully users will more easily recognize this applies to them.
2020-01-02 09:22:51 +01:00
f20728ef00
Fix zwave control panel wiki ( #11583 )
...
The **Entity Attrributes** button is actually named **Entity Information**. Also fixing the description on polling intensity to be a little clearer.
2020-01-01 19:52:26 +01:00
b5a2b12f3b
added build-essential to the ubuntu prerequisites ( #11547 )
2019-12-28 10:08:17 +01:00
f763a9ccf9
Update controllers.markdown
2019-12-12 09:50:39 +01:00
21f72d7c38
Merge branch 'rc' into current
2019-11-20 16:25:00 -08:00
78f80e35df
Add note for disco lights when HA is running ( #11199 )
...
* Add note for disco lights when HA is running
See https://github.com/home-assistant/home-assistant/issues/28642#issuecomment-552678145
* ✏️ Tweak
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
2019-11-16 18:31:48 +01:00
2937ca5308
Removal of Hassbian from documentation ( #10934 )
...
* R.I.P Hassbian
* Restore device tracker to glosssay
* Remove space
2019-10-26 09:53:03 +02:00
aaa6f71800
Include note about secure inclusion bandwidth ( #10777 )
...
Z-Wave secure inclusion uses more bandwidth for communications and can slow down your network. This adds a note to the docs to mention that as we've seen performance issues in discord with too many chatty nodes that were secure included.
2019-10-15 20:00:27 +02:00
c545e19c46
Spelling fixes ( #10723 )
...
* Spelling fixes
* ✏️ Tweak
2019-10-11 23:58:24 +02:00
7d8944fe54
Update zwave devices page ( #10603 )
...
S2 still not supported in OZW as of 10/2019
Update config github link to the OZW1.4 branch since HA is still on 1.4 and the master branch is for OZW1.6
2019-10-05 18:42:00 +02:00
dcc7c10ce4
Rewrites all URLs in our website from components -> integrations
2019-10-02 00:35:28 +02:00
79206dd3f4
No dollar signs in shell code ( #10477 )
2019-09-29 20:24:23 +02:00
da5e1aad0e
Adds GitHub Action for Remark, fixes code flag on fences ( #10475 )
...
* Adds basics for adding Remark
* Adds GitHub Action for remark
* Adds GitHub Action for remark
* Ensure all fenced code blocks have a code flag
2019-09-29 00:50:28 +02:00
936cdcce87
Update controllers.markdown ( #10360 )
...
Added SmartThings as an alternative hub because it also supports Z-Wave devices.
2019-09-13 20:17:08 +02:00
0aaf536ef8
Remove reference to removed zwave update_config ( #10210 )
...
* Update installation.markdown
Remove reference to `update_config` service, which has been removed.
* 🚑 Fix build error
2019-08-28 13:52:20 -07:00
6d76203c89
Merge branch 'current' into next
2019-08-21 16:22:28 -07:00
c8f5a564e8
Remove update_config from zwave services ( #10139 )
2019-08-16 19:32:14 +02:00
1b2f4058e9
Markdown fix ( #10154 )
...
* Markdown fix
Fixing the markdown
* Fix
2019-08-16 19:04:46 +02:00
af7b284906
Scene support for Zooz Z-Wave Switches ( #10067 )
...
Added instructions on how to update the switch and openzwave config file to add scene support for Zooz Zen26 & Zen27 switches.
2019-08-08 20:34:29 +02:00
928219d014
Clarification ( #10049 )
...
Clarification update on when the Modem Manager applies.
2019-08-05 16:06:22 +02:00
d57ce11313
Update installation.markdown ( #9985 )
...
Remove instructions to install libopenzwave1.5 on Linux installs. This instruction causes a lot of problems as the installed files interfere with the Python openzwave installation.
2019-07-28 20:33:20 +02:00
e7e3397acc
Adding warning ( #9960 )
...
* Adding warning
As reported by multiple folks in the beta channel, looks like there's issues
* 🚑 Fixed Markdown
2019-07-23 21:56:00 +02:00
42842f64a6
Collection of configuration block fixes ( #9874 )
2019-07-16 22:58:38 +02:00
c464056402
Making our website faster, cleaner and prettier ( #9853 )
...
* 🔥 Removes octopress.js
* 🔥 Removes use of root_url var
* 🔥 Removes Octopress generator reference from feed
* 🔥 Removes delicious support
* 🔥 Removes support for Pinboard
* 🔥 Removes support for Disqus
* 🔥 Removes support for Google Plus
* ↩️ Migrate custom after_footer to default template
* ↩️ Migrate custom footer to default template
* ↩️ Migrate custom header to default template
* 🔥 Removes unused template files
* 🚀 Places time to read directly in post template
* 🚀 Removes unneeded capture from archive_post.html template
* 🔥 🚀 Removes unused, but heaving sorting call in component page
* 🚀 Merged javascripts into a single file
* 🔥 Removes more uses of root_url
* 🚀 Removal of unneeded captures from head
* 🔥 🚀 Removal of expensive liquid HTML compressor
* 🔥 Removes unneeded templates
* 🚀 Replaces kramdown with GitHub's CommonMark 🚀
* 💄 Adds Prism code syntax highlighting
* ✨ Adds support for redirect in Netlify
* ↩️ 🔥 Let Netlify handle all developer doc redirects
* ✏️ Fixes typo in redirects file: Netify -> Netlify
* 🔥 Removes unused .themes folder
* 🔥 Removes unused aside.html template
* 🔥 Removes Disqus config leftover
* 🔥 Removes rouge highlighter config
* 🔥 Removes Octopress 🎉
* 💄 Adjust code block font size and adds soft wraps
* 💄 Adds styling for inline code blocks
* 💄 Improve styling of note/warning/info boxes + div support
* 🔨 Rewrites all note/warning/info boxes
2019-07-15 22:17:54 +02:00
99460b8b57
Update Raspberry Pi specific ( #9833 )
...
Added information that the rebooted is necessary after enabling the serial interface.
2019-07-12 13:27:50 +02:00
1833c32a2c
Cleans up front matter ( #9835 )
...
* Sets front matter defaults
* Removes default front matter from section templates/pages
* Removes default front matter from addon pages
* Removes default front matter from integration pages
* Removes default front matter from posts
* Removes default front matter from docs pages
* Removes default front matter from other pages
* Fixes blog category pages
2019-07-11 14:35:08 -07:00
ebca3218c7
🔥 Removes linkable_title everywhere ( #9772 )
...
* Automatically create linkable headers
* Visually improve position of linkable header chain icon
* Do not auto link headers on homepage
* Remove linkable_title everywhere
* 🚑 Re-instante linkable_title plugin as NOOP
2019-07-04 19:08:27 +02:00
28f115a024
Merge branch 'current' into rc
2019-06-26 22:56:47 +02:00
774042665b
Update installation.markdown ( #9613 )
...
* Update installation.markdown
* ✏️ Tweaks
2019-06-20 19:29:07 +02:00
b5dd360691
Merge remote-tracking branch 'origin/current' into next
2019-06-19 16:29:24 -07:00
1e46c4fcbe
Component(s) -> Integration(s) ( #9656 )
...
Signed-off-by: Franck Nijhof <frenck@addons.community>
2019-06-19 15:12:14 +02:00
fadf8456de
Added documentation for invert_percent configuration for zwave rollershutte ( #9216 )
2019-06-17 14:45:18 -07:00
8237545cd3
Fix a typo ( #9643 )
...
"in efficient" -> "inefficient"
2019-06-17 17:18:15 +02:00
24dd703d77
Adding the warnings here ( #9638 )
...
* Adding the warnings here
* ✏️ Tweak
2019-06-16 14:55:51 +02:00
b90fcfe538
✏️ Tweak
2019-06-01 00:41:16 +02:00
d174c6c55e
Add device model and bold shutdown directions
...
Added a device model for the Hank Z-Wave button: https://products.z-wavealliance.org/products/1918
I just bought one and used the same directions to get it working.
I also wanted to bold the directions telling the user to shutdown because I missed that paragraph and lost quite a bit of time trying to figure out why it wouldn't persist.
2019-05-31 17:54:42 -04:00
1399c324a0
Added info for HeatIt Scene Controllers ( #9023 )
...
* Update device-specific.markdown
Added info for the wall switches/scene controllers from HeatIt/ThermoFloor:
https://www.heatit.com/wp-content/uploads/2018/11/Heatit-Z-Push-Button-2.pdf
https://www.heatit.com/wp-content/uploads/2018/11/Heatit-Z-Push-Button-8.pdf
* ✏️ Tweak
* ✏️ Tweak
* ✏️ Tweak
2019-04-29 00:19:00 +02:00
01edd66389
Added another troubleshooting step ( #9268 )
...
* Added another troubleshooting step
After a chat with petergebruers, these error messages are good ways of identify if you've made the mistake of running multiple things that access the controller, which breaks your system in strange and mysterious ways.
* Minor changes
2019-04-28 23:41:00 +02:00
d5c995135b
Update on z-wave docs because of upcoming change ( #9095 )
...
* Update z-wave section
* ✏️ Tweaks
2019-04-03 17:07:17 -07:00
6b7972413c
Merge branch 'rc' into current
2019-04-03 14:42:09 -07:00
60e7311086
Update device-specific.markdown ( #9099 )
...
* Update device-specific.markdown
Expand Aeotec Z-Stick section to provide alternative "pipe to cu" syntax for enabling/disabling "disco lights" on systems where redirection to serial devices doesn't work because the baud rate on the serial device reverts to 9600 when haas isn't running.
* ✏️ Tweaks
2019-04-02 10:02:19 +02:00
84ad821a8f
Autoheal default to false. Remove line that no longer relevant.
2019-04-01 09:19:59 -07:00
aea87d4ee0
Update documentation of 'Z-Wave Devices - Adding and Removing' section ( #9026 )
...
* Update adding.markdown
* ✏️ Fixes Markdown numbering
* ✏️ Again...
2019-03-30 14:17:33 +01:00
71d82e9a0f
Update device-specific.markdown ( #9058 )
...
* Update device-specific.markdown
Fixed formatting ("*" causing italics)
* ✏️ Tweak
* ✏️ Adds proper escaping
2019-03-30 14:07:12 +01:00
2720713e9e
Update device-specific.markdown ( #9042 )
...
Updates include an alternate way of turning off the aeotec z wave 'disco lights' that is known to work on the latest Hass.io and Pi configuration (using ttyACM0 instead of the the by serial id method).
Also provides additional guidance on how to properly insert the aeotec nanomote xml code into the zwcfg*.xml file.
2019-03-26 23:34:48 +01:00
8aff0b16dc
Changed a word to clarify ( #8988 )
...
refigure out -> recompute
2019-03-20 11:26:44 -04:00
34bc30185a
Added documentation for the Aeotec NanoMote Quad ( #8828 )
...
* Updated to add Aetoec NanoMote Quad
https://products.z-wavealliance.org/products/2817
* Updated Formatting
* Updated Names and Example
* ✏️ Tweak
2019-03-06 22:02:28 +01:00
8d122d5229
Added documentation for the Remotec ZRC-90 ( #8819 )
2019-03-04 12:57:37 +01:00
8ae9eef5c1
Fix link ( #8694 )
2019-02-22 21:03:05 +01:00
b7dee5cbb8
Restructuring for clarity ( #8425 )
...
The current structure leads to confusion, which parts apply to Hass.io, or Hassbian, or ... As discussed in the architecture issue, I've moved all the platform specific parts to the end, even for those that require no actions.
I've also:
* moved the details for how to find the appropriate device path, and highlighting the likely default paths
* linked to a useful site that'll generate the content for the key, for those not using Linux
* stripped out the duplication of statements about the first run
* reordered the Hass.io section to put the GUI actions first, with a "you can also use the command line" rather than the other way around
* added details of how to pass the stick through on Docker
* put in a Community install section for other Linux, and Mac. Removed RancherOS
* expanded the wall of text note explaining the `ls` output so that you can actually follow it
2019-02-10 22:42:05 +01:00
6c29c39962
Update installation.markdown ( #8391 )
2019-02-02 23:25:49 +01:00
95029cb1d7
✏️ Tweak round 2
2019-01-31 14:03:49 +01:00
375b7817cc
✏️ Tweak
2019-01-31 14:03:11 +01:00
51e01ee76b
Update source/_docs/z-wave/devices.markdown
...
typo
Co-Authored-By: sveip <petersveistrup@gmail.com>
2019-01-26 14:01:58 +01:00
1a50f8f548
Clarify polling.
2019-01-26 13:03:58 +01:00
e19443b969
👕 Replaces truthy YAML boolean values ( #8212 )
2019-01-19 12:02:31 +01:00
69a0bfd29a
🔨 Replaces all hardlinks with relative ones ( #8207 )
2019-01-19 11:56:44 +01:00
4e98de3efc
Update control-panel.markdown ( #8001 )
...
Updates for https://github.com/home-assistant/home-assistant-polymer/pull/2390
Allow user to remove broadcast node from groups in ui.
2019-01-03 23:31:52 +01:00
1c1bc54c96
Update installation.markdown ( #7883 )
...
Change from -G to -aG, since we want to add to the group and not change the group. (Sorry I didn't catch this with the last one.)
2018-12-17 16:44:30 +01:00
6e3a0cc33d
Update installation.markdown ( #7868 )
...
Change usermod "-G" to usermod "-aG" since we want the user added to dialout, not moved to dialout.
2018-12-16 09:37:23 +01:00
996ec7f3b1
add fibaro to the list of supported hubs ( #7706 )
2018-12-02 13:01:54 +01:00
171c6af6f1
Update Z-Wave device 'delay' default ( #7668 )
...
The z-wave component sets a default of 5, not 2.
DEFAULT_CONF_REFRESH_DELAY = 5
2018-11-28 10:35:12 +01:00
8466f55293
Typo spelling correction ( #7660 )
...
Aoetec to Aeotec
2018-11-27 22:31:07 +01:00
d840835d1b
Adding configurator note ( #7197 )
...
Now it can be set up with the integration, we probably should mention that ;)
2018-10-28 18:00:51 +01:00
2dbbafef62
Merge branch 'current' into next
2018-10-14 09:46:28 +02:00
7017eb4cd5
`is_state` needs quotes all the way ( #6751 )
...
Apparently `is_state` treats the value as a string
2018-10-13 21:43:48 +02:00
c3926e3b49
Fixed a link on z-wave entities ( #6737 )
2018-10-13 10:18:16 +02:00
98ccac56c7
Merge branch 'current' into next
2018-10-12 17:00:15 +02:00
54f350b22b
Merge branch 'rc' into current
2018-10-12 16:57:35 +02:00
667a05b90a
Simplification of the supported controllers ( #6647 )
...
* Simplification of the supported controllers
Stripped it down to the key fact - *static controllers* are all that'll work with OZW.
Noted that Z-Wave Plus controllers are recommended, to take advantage of all the features of Z-Wave Plus.
Noted that S2 and Smart Start aren't supported by OZW
* Controllers restored
Restored the list of confirmed sticks, but taken out the lists of OSs because we just took the list from the OZW pages, and it's clear that's outdated and incomplete
2018-10-10 12:11:39 +02:00
c31aba7408
Update controllers.markdown
2018-10-09 21:08:22 +02:00
610b8e7f64
Add config entry note for Z-Wave ( #6636 )
...
* Add config entry note for Z-Wave
* ✏️ Tweaks
2018-10-09 19:59:22 +02:00
a4dca76042
Fixed typos ( #6623 )
...
* Fixed typos
* More typos
2018-10-09 12:13:54 +02:00
a39d89e86f
Update support controllers ( #6620 )
...
Tested the Zooz z-wave Plus S2 Stick ZST10 with Home-Assistant. Zwave worked, nodes included and communicating using a Raspberriy Pi3 with the latest Hass.io.
2018-10-08 21:42:30 +02:00
d3589d9518
typos fixed ( #6582 )
2018-10-07 10:58:35 -04:00
Frankster-NL
bepsoccer
Phil Freo
pettertho
Artekus
Tyler Szabo
staal0
Thomas Lovén
Alok Saboo
Franck Nijhof
Alexis Iglauer
Roelof Schuiling
Ville Skyttä
Thiago Oliveira
bkcberry
Paulus Schoutsen
Michael Bisbjerg
Fredrik Lindqvist
Charles Garwood
Franck Nijhof
Franck Nijhof
seanvictory
Keith Pine
Dubh Ad
David
Ness
Pascal Vizeli
warcanoid
Tommaso Marchionni
Rick Fletcher
Klaas Schoute
Kyle Niewiada
timfosse
Erik-jan Riemers
Jason White
dnguyen800
mastakebob
Ben Bennett
zackbcom
stefanlod
Alec Rust
Dan Loewenherz
sveip
John Arild Berentsen
Nicole Zeckner
Michael Luggen
Ben Nelson
Austin Drummond
Paulus Schoutsen
Charles Garwood
Ben Bangert
Florian Klien