431 lines
15 KiB
Python
431 lines
15 KiB
Python
"""Support for Honeywell (US) Total Connect Comfort climate systems."""
|
|
from __future__ import annotations
|
|
|
|
import asyncio
|
|
import datetime
|
|
from typing import Any
|
|
|
|
from aiohttp import ClientConnectionError
|
|
import aiosomecomfort
|
|
|
|
from homeassistant.components.climate import (
|
|
ATTR_TARGET_TEMP_HIGH,
|
|
ATTR_TARGET_TEMP_LOW,
|
|
DEFAULT_MAX_TEMP,
|
|
DEFAULT_MIN_TEMP,
|
|
FAN_AUTO,
|
|
FAN_DIFFUSE,
|
|
FAN_ON,
|
|
PRESET_AWAY,
|
|
PRESET_NONE,
|
|
ClimateEntity,
|
|
ClimateEntityFeature,
|
|
HVACAction,
|
|
HVACMode,
|
|
)
|
|
from homeassistant.config_entries import ConfigEntry
|
|
from homeassistant.const import ATTR_TEMPERATURE, UnitOfTemperature
|
|
from homeassistant.core import HomeAssistant
|
|
from homeassistant.helpers.entity import DeviceInfo
|
|
from homeassistant.helpers.entity_platform import AddEntitiesCallback
|
|
|
|
from . import HoneywellData
|
|
from .const import (
|
|
_LOGGER,
|
|
CONF_COOL_AWAY_TEMPERATURE,
|
|
CONF_HEAT_AWAY_TEMPERATURE,
|
|
DOMAIN,
|
|
)
|
|
|
|
ATTR_FAN_ACTION = "fan_action"
|
|
|
|
ATTR_PERMANENT_HOLD = "permanent_hold"
|
|
|
|
PRESET_HOLD = "Hold"
|
|
|
|
HEATING_MODES = {"heat", "emheat", "auto"}
|
|
COOLING_MODES = {"cool", "auto"}
|
|
|
|
HVAC_MODE_TO_HW_MODE = {
|
|
"SwitchOffAllowed": {HVACMode.OFF: "off"},
|
|
"SwitchAutoAllowed": {HVACMode.HEAT_COOL: "auto"},
|
|
"SwitchCoolAllowed": {HVACMode.COOL: "cool"},
|
|
"SwitchHeatAllowed": {HVACMode.HEAT: "heat"},
|
|
}
|
|
HW_MODE_TO_HVAC_MODE = {
|
|
"off": HVACMode.OFF,
|
|
"emheat": HVACMode.HEAT,
|
|
"heat": HVACMode.HEAT,
|
|
"cool": HVACMode.COOL,
|
|
"auto": HVACMode.HEAT_COOL,
|
|
}
|
|
HW_MODE_TO_HA_HVAC_ACTION = {
|
|
"off": HVACAction.IDLE,
|
|
"fan": HVACAction.FAN,
|
|
"heat": HVACAction.HEATING,
|
|
"cool": HVACAction.COOLING,
|
|
}
|
|
FAN_MODE_TO_HW = {
|
|
"fanModeOnAllowed": {FAN_ON: "on"},
|
|
"fanModeAutoAllowed": {FAN_AUTO: "auto"},
|
|
"fanModeCirculateAllowed": {FAN_DIFFUSE: "circulate"},
|
|
}
|
|
HW_FAN_MODE_TO_HA = {
|
|
"on": FAN_ON,
|
|
"auto": FAN_AUTO,
|
|
"circulate": FAN_DIFFUSE,
|
|
"follow schedule": FAN_AUTO,
|
|
}
|
|
|
|
SCAN_INTERVAL = datetime.timedelta(seconds=30)
|
|
|
|
|
|
async def async_setup_entry(
|
|
hass: HomeAssistant, entry: ConfigEntry, async_add_entities: AddEntitiesCallback
|
|
) -> None:
|
|
"""Set up the Honeywell thermostat."""
|
|
cool_away_temp = entry.options.get(CONF_COOL_AWAY_TEMPERATURE)
|
|
heat_away_temp = entry.options.get(CONF_HEAT_AWAY_TEMPERATURE)
|
|
|
|
data: HoneywellData = hass.data[DOMAIN][entry.entry_id]
|
|
|
|
async_add_entities(
|
|
[
|
|
HoneywellUSThermostat(data, device, cool_away_temp, heat_away_temp)
|
|
for device in data.devices.values()
|
|
]
|
|
)
|
|
|
|
|
|
class HoneywellUSThermostat(ClimateEntity):
|
|
"""Representation of a Honeywell US Thermostat."""
|
|
|
|
_attr_has_entity_name = True
|
|
|
|
def __init__(
|
|
self,
|
|
data: HoneywellData,
|
|
device: aiosomecomfort.device.Device,
|
|
cool_away_temp: int | None,
|
|
heat_away_temp: int | None,
|
|
) -> None:
|
|
"""Initialize the thermostat."""
|
|
self._data = data
|
|
self._device = device
|
|
self._cool_away_temp = cool_away_temp
|
|
self._heat_away_temp = heat_away_temp
|
|
self._away = False
|
|
|
|
self._attr_unique_id = device.deviceid
|
|
|
|
self._attr_device_info = DeviceInfo(
|
|
identifiers={(DOMAIN, device.deviceid)},
|
|
name=device.name,
|
|
manufacturer="Honeywell",
|
|
)
|
|
|
|
self._attr_temperature_unit = UnitOfTemperature.FAHRENHEIT
|
|
if device.temperature_unit == "C":
|
|
self._attr_temperature_unit = UnitOfTemperature.CELSIUS
|
|
self._attr_preset_modes = [PRESET_NONE, PRESET_AWAY, PRESET_HOLD]
|
|
|
|
# not all honeywell HVACs support all modes
|
|
|
|
self._hvac_mode_map = {
|
|
key2: value2
|
|
for key1, value1 in HVAC_MODE_TO_HW_MODE.items()
|
|
if device.raw_ui_data[key1]
|
|
for key2, value2 in value1.items()
|
|
}
|
|
self._attr_hvac_modes = list(self._hvac_mode_map)
|
|
|
|
self._attr_supported_features = (
|
|
ClimateEntityFeature.PRESET_MODE
|
|
| ClimateEntityFeature.TARGET_TEMPERATURE
|
|
| ClimateEntityFeature.TARGET_TEMPERATURE_RANGE
|
|
)
|
|
|
|
if device._data["canControlHumidification"]:
|
|
self._attr_supported_features |= ClimateEntityFeature.TARGET_HUMIDITY
|
|
|
|
if device.raw_ui_data["SwitchEmergencyHeatAllowed"]:
|
|
self._attr_supported_features |= ClimateEntityFeature.AUX_HEAT
|
|
|
|
if not device._data["hasFan"]:
|
|
return
|
|
|
|
# not all honeywell fans support all modes
|
|
self._fan_mode_map = {
|
|
key2: value2
|
|
for key1, value1 in FAN_MODE_TO_HW.items()
|
|
if device.raw_fan_data[key1]
|
|
for key2, value2 in value1.items()
|
|
}
|
|
|
|
self._attr_fan_modes = list(self._fan_mode_map)
|
|
|
|
self._attr_supported_features |= ClimateEntityFeature.FAN_MODE
|
|
|
|
@property
|
|
def extra_state_attributes(self) -> dict[str, Any]:
|
|
"""Return the device specific state attributes."""
|
|
data: dict[str, Any] = {}
|
|
data[ATTR_FAN_ACTION] = "running" if self._device.fan_running else "idle"
|
|
data[ATTR_PERMANENT_HOLD] = self._is_permanent_hold()
|
|
if self._device.raw_dr_data:
|
|
data["dr_phase"] = self._device.raw_dr_data.get("Phase")
|
|
return data
|
|
|
|
@property
|
|
def min_temp(self) -> float:
|
|
"""Return the minimum temperature."""
|
|
if self.hvac_mode == HVACMode.COOL:
|
|
return self._device.raw_ui_data["CoolLowerSetptLimit"]
|
|
if self.hvac_mode == HVACMode.HEAT:
|
|
return self._device.raw_ui_data["HeatLowerSetptLimit"]
|
|
if self.hvac_mode == HVACMode.HEAT_COOL:
|
|
return min(
|
|
[
|
|
self._device.raw_ui_data["CoolLowerSetptLimit"],
|
|
self._device.raw_ui_data["HeatLowerSetptLimit"],
|
|
]
|
|
)
|
|
return DEFAULT_MIN_TEMP
|
|
|
|
@property
|
|
def max_temp(self) -> float:
|
|
"""Return the maximum temperature."""
|
|
if self.hvac_mode == HVACMode.COOL:
|
|
return self._device.raw_ui_data["CoolUpperSetptLimit"]
|
|
if self.hvac_mode == HVACMode.HEAT:
|
|
return self._device.raw_ui_data["HeatUpperSetptLimit"]
|
|
if self.hvac_mode == HVACMode.HEAT_COOL:
|
|
return max(
|
|
[
|
|
self._device.raw_ui_data["CoolUpperSetptLimit"],
|
|
self._device.raw_ui_data["HeatUpperSetptLimit"],
|
|
]
|
|
)
|
|
return DEFAULT_MAX_TEMP
|
|
|
|
@property
|
|
def current_humidity(self) -> int | None:
|
|
"""Return the current humidity."""
|
|
return self._device.current_humidity
|
|
|
|
@property
|
|
def hvac_mode(self) -> HVACMode | None:
|
|
"""Return hvac operation ie. heat, cool mode."""
|
|
return HW_MODE_TO_HVAC_MODE.get(self._device.system_mode)
|
|
|
|
@property
|
|
def hvac_action(self) -> HVACAction | None:
|
|
"""Return the current running hvac operation if supported."""
|
|
if self.hvac_mode == HVACMode.OFF:
|
|
return None
|
|
return HW_MODE_TO_HA_HVAC_ACTION.get(self._device.equipment_output_status)
|
|
|
|
@property
|
|
def current_temperature(self) -> float | None:
|
|
"""Return the current temperature."""
|
|
return self._device.current_temperature
|
|
|
|
@property
|
|
def target_temperature(self) -> float | None:
|
|
"""Return the temperature we try to reach."""
|
|
if self.hvac_mode == HVACMode.COOL:
|
|
return self._device.setpoint_cool
|
|
if self.hvac_mode == HVACMode.HEAT:
|
|
return self._device.setpoint_heat
|
|
return None
|
|
|
|
@property
|
|
def target_temperature_high(self) -> float | None:
|
|
"""Return the highbound target temperature we try to reach."""
|
|
if self.hvac_mode == HVACMode.HEAT_COOL:
|
|
return self._device.setpoint_cool
|
|
return None
|
|
|
|
@property
|
|
def target_temperature_low(self) -> float | None:
|
|
"""Return the lowbound target temperature we try to reach."""
|
|
if self.hvac_mode == HVACMode.HEAT_COOL:
|
|
return self._device.setpoint_heat
|
|
return None
|
|
|
|
@property
|
|
def preset_mode(self) -> str | None:
|
|
"""Return the current preset mode, e.g., home, away, temp."""
|
|
if self._away:
|
|
return PRESET_AWAY
|
|
if self._is_permanent_hold():
|
|
return PRESET_HOLD
|
|
|
|
return None
|
|
|
|
@property
|
|
def is_aux_heat(self) -> bool | None:
|
|
"""Return true if aux heater."""
|
|
return self._device.system_mode == "emheat"
|
|
|
|
@property
|
|
def fan_mode(self) -> str | None:
|
|
"""Return the fan setting."""
|
|
return HW_FAN_MODE_TO_HA.get(self._device.fan_mode)
|
|
|
|
def _is_permanent_hold(self) -> bool:
|
|
heat_status = self._device.raw_ui_data.get("StatusHeat", 0)
|
|
cool_status = self._device.raw_ui_data.get("StatusCool", 0)
|
|
return heat_status == 2 or cool_status == 2
|
|
|
|
async def _set_temperature(self, **kwargs) -> None:
|
|
"""Set new target temperature."""
|
|
if (temperature := kwargs.get(ATTR_TEMPERATURE)) is None:
|
|
return
|
|
try:
|
|
# Get current mode
|
|
mode = self._device.system_mode
|
|
# Set hold if this is not the case
|
|
if self._device.hold_heat is False and self._device.hold_cool is False:
|
|
# Get next period time
|
|
hour_heat, minute_heat = divmod(
|
|
self._device.raw_ui_data["HeatNextPeriod"] * 15, 60
|
|
)
|
|
hour_cool, minute_cool = divmod(
|
|
self._device.raw_ui_data["CoolNextPeriod"] * 15, 60
|
|
)
|
|
# Set temporary hold time and temperature
|
|
if mode in COOLING_MODES:
|
|
await self._device.set_hold_cool(
|
|
datetime.time(hour_cool, minute_cool), temperature
|
|
)
|
|
if mode in HEATING_MODES:
|
|
await self._device.set_hold_heat(
|
|
datetime.time(hour_heat, minute_heat), temperature
|
|
)
|
|
|
|
# Set temperature if not in auto - set the temperature
|
|
else:
|
|
if mode == "cool":
|
|
await self._device.set_setpoint_cool(temperature)
|
|
if mode == "heat":
|
|
await self._device.set_setpoint_heat(temperature)
|
|
|
|
except aiosomecomfort.SomeComfortError as err:
|
|
_LOGGER.error("Invalid temperature %.1f: %s", temperature, err)
|
|
|
|
async def async_set_temperature(self, **kwargs: Any) -> None:
|
|
"""Set new target temperature."""
|
|
if {HVACMode.COOL, HVACMode.HEAT} & set(self._hvac_mode_map):
|
|
await self._set_temperature(**kwargs)
|
|
try:
|
|
if temperature := kwargs.get(ATTR_TARGET_TEMP_HIGH):
|
|
await self._device.set_setpoint_cool(temperature)
|
|
if temperature := kwargs.get(ATTR_TARGET_TEMP_LOW):
|
|
await self._device.set_setpoint_heat(temperature)
|
|
|
|
except aiosomecomfort.SomeComfortError as err:
|
|
_LOGGER.error("Invalid temperature %.1f: %s", temperature, err)
|
|
|
|
async def async_set_fan_mode(self, fan_mode: str) -> None:
|
|
"""Set new target fan mode."""
|
|
await self._device.set_fan_mode(self._fan_mode_map[fan_mode])
|
|
|
|
async def async_set_hvac_mode(self, hvac_mode: HVACMode) -> None:
|
|
"""Set new target hvac mode."""
|
|
await self._device.set_system_mode(self._hvac_mode_map[hvac_mode])
|
|
|
|
async def _turn_away_mode_on(self) -> None:
|
|
"""Turn away on.
|
|
|
|
Somecomfort does have a proprietary away mode, but it doesn't really
|
|
work the way it should. For example: If you set a temperature manually
|
|
it doesn't get overwritten when away mode is switched on.
|
|
"""
|
|
self._away = True
|
|
# Get current mode
|
|
mode = self._device.system_mode
|
|
try:
|
|
# Set permanent hold
|
|
# and Set temperature
|
|
if mode in COOLING_MODES:
|
|
await self._device.set_hold_cool(True, self._cool_away_temp)
|
|
if mode in HEATING_MODES:
|
|
await self._device.set_hold_heat(True, self._heat_away_temp)
|
|
|
|
except aiosomecomfort.SomeComfortError:
|
|
_LOGGER.error(
|
|
"Temperature out of range. Mode: %s, Heat Temperature: %.1f, Cool Temperature: %.1f",
|
|
mode,
|
|
self._heat_away_temp,
|
|
self._cool_away_temp,
|
|
)
|
|
|
|
async def _turn_hold_mode_on(self) -> None:
|
|
"""Turn permanent hold on."""
|
|
# Get current mode
|
|
mode = self._device.system_mode
|
|
# Check that we got a valid mode back
|
|
if mode in HW_MODE_TO_HVAC_MODE:
|
|
try:
|
|
# Set permanent hold
|
|
if mode in COOLING_MODES:
|
|
await self._device.set_hold_cool(True)
|
|
if mode in HEATING_MODES:
|
|
await self._device.set_hold_heat(True)
|
|
|
|
except aiosomecomfort.SomeComfortError:
|
|
_LOGGER.error("Couldn't set permanent hold")
|
|
else:
|
|
_LOGGER.error("Invalid system mode returned: %s", mode)
|
|
|
|
async def _turn_away_mode_off(self) -> None:
|
|
"""Turn away/hold off."""
|
|
self._away = False
|
|
try:
|
|
# Disabling all hold modes
|
|
await self._device.set_hold_cool(False)
|
|
await self._device.set_hold_heat(False)
|
|
except aiosomecomfort.SomeComfortError:
|
|
_LOGGER.error("Can not stop hold mode")
|
|
|
|
async def async_set_preset_mode(self, preset_mode: str) -> None:
|
|
"""Set new preset mode."""
|
|
if preset_mode == PRESET_AWAY:
|
|
await self._turn_away_mode_on()
|
|
elif preset_mode == PRESET_HOLD:
|
|
self._away = False
|
|
await self._turn_hold_mode_on()
|
|
else:
|
|
await self._turn_away_mode_off()
|
|
|
|
async def async_turn_aux_heat_on(self) -> None:
|
|
"""Turn auxiliary heater on."""
|
|
await self._device.set_system_mode("emheat")
|
|
|
|
async def async_turn_aux_heat_off(self) -> None:
|
|
"""Turn auxiliary heater off."""
|
|
if HVACMode.HEAT in self.hvac_modes:
|
|
await self.async_set_hvac_mode(HVACMode.HEAT)
|
|
else:
|
|
await self.async_set_hvac_mode(HVACMode.OFF)
|
|
|
|
async def async_update(self) -> None:
|
|
"""Get the latest state from the service."""
|
|
try:
|
|
await self._device.refresh()
|
|
self._attr_available = True
|
|
except aiosomecomfort.SomeComfortError:
|
|
try:
|
|
await self._data.client.login()
|
|
|
|
except (
|
|
aiosomecomfort.SomeComfortError,
|
|
ClientConnectionError,
|
|
asyncio.TimeoutError,
|
|
):
|
|
self._attr_available = False
|
|
|
|
except (ClientConnectionError, asyncio.TimeoutError):
|
|
self._attr_available = False
|